Industrial Grade USB Hub User’s Manual
Industrial Grade USB Hub
(ID-US0011-S1/ID-US0111-S1)
User's Manual
04‐0781
VER: 1.0
‐ 1 ‐
Industrial Grade USB Hub User’s Manual
Introduction
This industrial‐grade USB 2.0 hub is compliant with USB 2.0 specification and can expand 1 USB
port into multiple high‐efficient USB 2.0 port. It provides 15KV ESD protection for all signals.
Designed for industrial usage and tough working environments, this hub comes in a metal
housing with wall mountable and din rails.
Features
■ Compliant with USB2.0 version specification, Hi‐Speed USB data transmission rate up to 480
Mbps
■ Bus‐power (no external power adapter required) and self‐power mode selection
■ Dual power input (AC or DC) supply
■ Support USB Plug‐and‐Play
■ Over‐current detection and protection circuit design
■ 15KV ESD immunity to serial interface
■ Automatic link and speed detection
■ Industrial grade rugged metal enclosure design
■ Wall and DIN rail mount support
System Requirements
■ Windows® 7 / Vista / XP / 2000
■ Mac® OS X v10.1 and later for PowerPC Mac
■ Mac OS X v10.4 and later for Intel Mac
VER: 1.0
‐ 3 ‐
Industrial Grade USB Hub User’s Manual
Package Contents
■ Industrial‐grade USB 2.0 Hub
■ Screws (3)
■ USB cable
■ 3‐pin power terminal block
■ DIN mounting kit
Specifications
Item
Description
4 x USB2.0 (ID‐US0011‐S1 4‐Port Industrial Grade USB Hub)
Ports
7 x USB2.0 (ID‐US0111‐S1 7‐Port Industrial Grade USB Hub)
Connector
USB‐A‐female
ESD Protection
15KV ESD
Transmission Speed
Interface
12M~480Mbps
USB2.0
Interface Connector
Power Requirement
Operating Temperature
Operating Humidity
Dimension (LxWxH)
Enclosure Material
Regulatory Approvals
USB‐B female
Bus‐power/5V 3A DC/9~36V DC
0°C to 60°C
5 to 95% RH
142 x 63.6 x 24.6 mm (without DIN Mounting Kit)
Metal
CE/FCC
Specification is subject to change without further notice.
VER: 1.0
‐ 4 ‐
Industrial Grade USB Hub User’s Manual
Product Overview
4-Port Industrial Grade USB Hub
1. USB 2.0 upstream
2. USB 2.0 downstream
3. DC power jack
4. 9~36VDC power terminal
VER: 1.0
‐ 5 ‐
Industrial Grade USB Hub User’s Manual
7-Port Industrial Grade USB Hub
5. USB2.0 upstream
6. USB2.0 downstream
7. DC power jack
8. 9~36VDC power terminal
VER: 1.0
‐ 6 ‐
Industrial Grade USB Hub User’s Manual
Powering the Hub
DC-In
Plug the supplied power adapter into the wall outlet, and connect it to the hub.
Power terminal
Plug the supplied power terminal block into the hub according to the connector's orientation.
VER: 1.0
‐ 7 ‐
Industrial Grade USB Hub User’s Manual
DIN Mounting Kit Installation
This hub can be placed to a fl at surface, mounted on a wall or attached to a standard DIN‐Rail.
Screw the DIN mount kit into the hub as the illustration below before mounting.
Driver Installation
Important: This hub only operates at USB 2.0 speed when connected to a USB 2.0 controller.
Otherwise, it will operate as a USB 1.1 hub when connected to a USB 1.1 controller.
Windows and Mac will automatically install the correct driver when plugged into the computer.
No additional driver installation is needed
VER: 1.0
‐ 8 ‐
Industrial Grade USB Hub User’s Manual
Regulatory Compliance
FCC Conditions
This equipment has been tested and found to comply with Part 15 Class B of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received and include
interference that may cause undesired operation.
WEEE Information
For EU (European Union) member users: According to the WEEE (Waste
electrical and electronic equipment) Directive, do not dispose of this
product as household waste or commercial waste. Waste electrical and
electronic equipment should be appropriately collected and recycled as
required by practices established for your country. For information on
recycling of this product, please contact your local authorities, your
household waste disposal service or the shop where you purchased the
product.
VER: 1.0
‐ 9 ‐
Industrial Grade USB Hub User’s Manual
Blank Page
VER: 1.0
‐ 10 ‐
Industrial Grade USB Hub User’s Manual
Technical Support and Warranty:
and click on Support. Our online support database is updated daily with new drivers and
solutions. Answers to your questions could be just a few clicks away. You can also submit
questions online and one of our technical support analysts will promptly respond.
SIIG offers one year manufacturer warranty with this product. Please see our web site for more
warranty details. If you encounter any problems with this product, please follow the procedures
below.
A) If it is within the store's return policy period, please return the product to the store where you
purchased from.
B) If your purchase has passed the store's return policy period, please follow these steps to have
the product repaired or replaced.
Step 1: Submit your RMA request.
request to 510-657-5962. Your RMA request will be processed, if the product is
determined to be defective, an RMA number will be issued.
Step 2: After obtaining an RMA number, ship the product.
Properly pack the product for shipping. All software, cable(s) and any other accessories
that came with the original package must be included.
Clearly write your RMA number on the top of the returned package. SIIG will refuse to
accept any shipping package, and will not be responsible for a product returned without
an RMA number posted on the outside of the shipping carton.
You are responsible for the cost of shipping the product to SIIG at the following
address:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:____________________
SIIG will ship the repaired or replaced product via Ground in the U.S. and International
Economy outside of the U.S. at no cost to the customer.
VER: 1.0
‐ 11 ‐
Industrial Grade USB Hub User’s Manual
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity solutions (including
Serial ATA and Ultra ATA Controllers, FireWire, USB, and legacy I/O adapters) that bridge the
connection between Desktop/ Notebook systems and external peripherals. SIIG continues to
grow by adding A/V and Digital Signage connectivity solutions to our extensive portfolio. All
centered around the distribution and switching of A/V signals over CAT5/6, these products
include matrix switches, distribution amplifiers, extenders, converters, splitters, cabling, and
more.
SIIG is the premier one-stop source of upgrades and is committed to providing high quality
products while keeping economical and competitive prices. High-quality control standards are
evident by one of the lowest defective return rates in the industry. Our products offer
comprehensive user manuals, user-friendly features, and most products are backed by a lifetime
warranty.
SIIG products can be found in many computer retail stores, mail order catalogs, and e-commerce
sites in the Americas, as well as through major distributors, system integrators, and VARs.
PRODUCT NAME
Industrial Grade USB Hub
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS
B OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Ph: 510-657-8688
Industrial Grade USB Hub is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Other names used in this publication are for identification only and may
be trademarks of their respective companies.
February, 2012
Copyright © 2011 by SIIG, Inc. All rights reserved.
VER: 1.0
‐ 12 ‐
|