Cat. No. 500876
Mikrofone | evolution
General Description
The e 912 S is a high-quality, pre-polarized condenser microphone with
half-cardioid pick-up pattern, acoustically optimized for picking up speech.
Due to its unobtrusive, flat design, it is ideally suited for use on conference
tables, altars and lecterns. The e 912 S can be switched on and off via an
integrated membrane switch.
Technical Data
Transducer principle.....................................................pre-polarised
condenser microphone
Frequency response .................................................20 – 20 000 Hz
Transducer principle............................................pressure gradient,
permanently polarized condenser
Pick-up pattern ..............................................................half-cardioid
Sensitivity in free field,
no load (1kHz) .............................................................6 (10) mV/Pa
Depending on adjusted
frequency response curve
Maximum sound pressure level (passiv)............................134 dB
Dimensions ................................................. 126.5 x 105 x 26.5 mm
(4.98“ x 4.13“ x 1.04“)
Weight .....................................................................550 g (19.40 oz)
0˚
0
30˚
30˚
5
Features
10
15
20
25
dB
J
Programmable membrane switch
60˚
60˚
J
Very unobtrusive due to flat design
J
Extremely rugged sound inlet basket
90˚
90˚
J
Rubber damping plate on base
J
Mounting slots for mounting the microphone to table tops, lecterns, etc.
J
Gold-plated XLR connector
120˚
120˚
J
Integrated electronics (instead of in-line preamp)
J
An internal DIP switch bank provides the following features: on/off
(factory preset), push-to-talk button (PTT), cough button (PTM) or
permanently switched on (ON)
150˚
150˚
180˚
125 Hz
250 Hz
500 Hz
2000 Hz
4000 Hz
8000 Hz
16000 Hz
1000 Hz
J
The frequency response curve can be changed via a second DIP switch
bank: low cut, low and high boost (factory preset), low boost or linear
(see e 912).
-20
-30
-40
-50
-60
-70
J
The e 912 S has been optimized for picking up speech at relatively short
distances, while the sister model e 916 has been designed for instrument
pick up. For this reason, the frequency response curve of the e 912 S
differs from that of the e 912.
J
With the e 912 S, you can obtain the frequency response curve of the
e 912 by setting the DIP switch to the position lin (linear).
J
Delivery Includes: Microphone e 912 S
50
100
200
500
1k
2k
5k
10k
20k
Pouch
Hz
User guide
black
red
green
blue
low und high boost (preset)
low cut (+ preset)
linear (e 912)
low boost
Variants
J
e 912 S BK, black
e 912 S NX, Nextel grey
Cat. No. 500875
Cat. No. 502193
J
e 912 S
|