AIR BLOWER
The BLAST
OPERATING & MAINTENANCE
INSTRUCTIONS
INTRODUCTION
READ THIS BOOK
The contents of this manual are based on the latest product
information available at the time of publication. Pacific
Steamex reserves the right to make changes or improve-
ments to its machines without notice.
This operator’s book has important information for the use
and safe operation of this machine. Read this book care-
fully before starting the machine. Keep this book and tell
all operators to read the book. If you do not follow the
instructions, you can cause an injury or damage equipment,
furniture or buildings.
For new books write to:
Pacific Steamex, Inc.
2259 S. Sheridan
FOR YOUR CONVENIENCE, RECORD THE
MACHINE MODEL AND SERIAL NUMBER:
Muskegon, MI 49442-6252
Carefully inspect all components to ensure that there is no
concealed freight damage. If such damage is discovered,
file a “CONCEALED DAMAGE REPORT” immediately
with the delivering carrier.
MODEL_______________________________
SERIAL NUMBER______________________
THE BLAST
14
13
15
12
4
3
2
1
9
7
10
6
5
8
11
ITEM PART NUMBER
DESCRIPTION
QTY
1
2
3
4
223385
633401
228501
655204
650904
911229
633403
608570
930006
980033
224285
631301
W310D
962089
908064
S936P
Filter, Intake
Gasket, Screen
Screen, Inlet
Motor, 115V
Carbon Brush, 115V Motor
Terminal, 3/16 Female
Gasket, Motor Mount
Screen, Outlet
Pop Rivets
Washer, Flat
Housing
Belt, Shoulder Strap
Screw, Belt: 10-32x1/2 FHP
Screw, Motor Mount: 10x3/4 AB PHP
Cord with Pendent Switch
Terminal, Male
Terminal, Female
Cord, Power
Connector, Ground
Strain Relief, Cord
Hose Assembly
Wand
Tool, Blower Nozzle
1
1
1
1
2
2
1
1
3
3
1
1
2
4
1
1
1
1
1
2
1
1
1
5
6
7
8
9
10
S948P
11
908065
911157
632401
224180
229880
638808
12
13
14
15
908064
WHT
BLK
VAC
MOTOR
WHT
GRN
908065
POWER CORD
WARRANTY POLICY
BLAST AIR BLOWER
The Pacific Steamex Inc. BLAST Air Blower has been manufactured, tested and inspected in accordance with specific engi-
neering requirements and is WARRANTED to be free from defects in workmanship and materials as follows:
Five (5) years – Rotational molded components.
One (1) year – All other components unless excluded below.
This warranty extends to the original user/purchaser and only when used, operated and maintained in accordance with Pacific
Steamex Inc. Operating and Maintenance instructions.
This warranty does not apply to the following wear parts and accessories of the machine including:
Part Number
223385
Part Name
Filter
650904
224180
908065
Carbon Brush
Hose Assembly
Cord Assembly
Nor does it apply to damage or failure caused by improper use, abuse or neglect. Warranty credit or replacement of return parts
including motors, tools, etc., is subject to incoming inspection of those items.
To secure repair under this warranty, the following procedure should be taken:
•
The inoperative machine or warranted parts must be delivered to the authorized dealer with shipping and delivery charges
prepaid. If unable to locate the Dealer, you may contact Pacific Steamex Inc. at the address listed herein for the location
of the nearest Pacific Steamex Inc. repair center or agent or for other instructions pertaining to your warranty difficulty.
•
•
Upon compliance with the above warranty procedure, all warranted repairs would be completed at no additional charge or
cost to the user.
Only Pacific Steamex Inc. or its authorized dealers and agents may make no charge warranty repairs on this product. All
others do so at their own risk.
This warranty limits Pacific Steamex Inc. liability to the repair of the product and/or warranted parts replacement and does
not include incidental or consequential damages arising from the use of a Pacific Steamex Inc. machine whether defective or
not.
This warranty is in lieu of all other expressed or implied warranties and is extended to the original purchaser/user.
PACIFIC STEAMEX, INC.
2259 S. SHERIDAN
MUSKEGON, MICHIGAN 49442-6252
800-968-1332
FAX: 800-863-9536
10/99
225685
|