Sharp Stereo System CP HF200H User Manual

ENGLISH  
XL-HF201PH(S) Hi Fi Component System consisting of XL-HF201PH(S) (main unit) and CP-HF200H (speaker  
system).  
XL-HF201PH(BK) Hi Fi Component System consisting of XL-HF201PH(BK) (main unit) and CP-HF200H (speaker  
system).  
XL-HF301PH(S) Hi Fi Component System consisting of XL-HF301PH(S) (main unit) and CP-HF301H (speaker  
system).  
Introduction  
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual  
carefully. It will guide you in operating your SHARP product.  
Special Note  
Supply of this product does not convey a license nor imply any right to distribute content created with this product in  
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating  
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution  
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact  
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for  
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.  
Accessories  
The following accessories are included.  
SB  
CD/U  
RDS  
Adaptors for iPhone x 3  
Remote control x 1  
RRMCGA263AWSA  
“AA” size battery  
(UM/SUM-3, R6, HP-7 or  
similar) x 1  
Stand for iPad x 1  
Speaker wires x 2  
(for XL-HF-201PH(S)/(BK))  
Speaker wires x 2  
(for XL-HF-301PH(S))  
FM aerial x 1  
The illustrations printed in this operation manual are for the model XL-HF301PH(S).  
CONTENTS  
Page  
Page  
General Information  
USB  
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . 2 - 3  
Listening to USB mass storage  
device/MP3 player . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . 14  
Preparation for Use  
System connections . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 5  
Radio  
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . .14 - 15  
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Basic Operation  
Advanced Features  
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Setting the clock (Remote control only). . . . . . . . . . . 6 - 7  
Using the Radio Data System (RDS) . . . . . . . . . 15 - 17  
Timer and sleep operation  
(Remote control only) . . . . . . . . . . . . . . . . . . . . . 18 - 19  
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . 20  
iPod, iPhone and iPad  
Listening to the iPod, iPhone or iPad. . . . . . . . . . . . . 7 - 9  
References  
CD or MP3/WMA disc Playback  
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . .20 - 21  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Listening to a CD or MP3/WMA disc . . . . . . . . . . . 9 - 10  
Advanced CD or MP3/WMA disc playback . . . . . . 10 - 11  
MP3/WMA folder mode (only for MP3/WMA files). . . . . 12  
Download from Www.Somanuals.cEom-1. All Manuals Search And Download.  
Controls and indicators (continued)  
Remote control  
1
Page  
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . 5  
2. On/Stand-by Button . . . . . . . . . . . . . . . . . 6, 8, 9, 18  
3. Numeric Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 10  
4. Bass/Treble Button . . . . . . . . . . . . . . . . . . . . . . . . 6  
5. X-Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
6. Tuning Down, Skip Down, Fast Reverse,  
2
17  
18  
19  
20  
3
Time Down Button . . . . . . . . . . . . . . 6, 9, 12, 14, 18  
7. Tuner Preset Up Button,  
iPod Cursor Up. . . . . . . . . . . . . . . . . . . . . . 8, 13, 14  
8. Volume Down Button. . . . . . . . . . . . . . . . . . . . . . . 6  
9. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13  
10. Tuner Preset Down Button,  
21  
22  
23  
24  
25  
4
5
6
7
8
iPod Cursor Down . . . . . . . . . . . . . . . . . . . 8, 13, 14  
11. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
12. USB Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
13. iPod Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
14. iPod Display (TV OUT) Button. . . . . . . . . . . . . . . . 8  
15. Disc/USB Display Button. . . . . . . . . . . . . . . . 12, 13  
16. RDS ASPM Button . . . . . . . . . . . . . . . . . . . . . . . 15  
17. Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . . 9  
18. Memory Button. . . . . . . . . . . . . . . . . . . . . . . . 10, 14  
19. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
20. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . 6, 18  
21. Sleep Button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
22. Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
23. Mute Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
24. Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
25. Tuning Up, Skip Up, Fast Forward,  
26  
27  
9
28  
10  
11  
12  
13  
14  
15  
29  
30  
31  
32  
33  
34  
35  
36  
CD/USB  
RDS  
16  
Time Up Button . . . . . . . . . . . . . . . . 6, 9, 12, 14, 18  
26. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 6  
27. Enter Button . . . . . . . . . . . . . . . . . . . . . . 6, 8, 13, 14  
28. Demo/Dimmer Button . . . . . . . . . . . . . . . . . . . . 4, 6  
29. Audio/Line (INPUT) Button . . . . . . . . . . . . . . . 5, 20  
30. Tuner Button . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15  
31. iPod Play/Pause Button. . . . . . . . . . . . . . . . . . . . . 9  
32. iPod Menu Button . . . . . . . . . . . . . . . . . . . . . . . . . 9  
33. CD/USB Play/Pause Button. . . . . . . . . . . . 9, 10, 13  
34. CD/USB Stop Button . . . . . . . . . . . . . . . . . 9, 10, 13  
35. RDS Display Button . . . . . . . . . . . . . . . . . . . . . . 15  
36. RDS PTY Button. . . . . . . . . . . . . . . . . . . . . . . . . . 15  
9
15  
10 11121314 16  
1 2 3  
4 5  
6 7  
8
Display  
17  
18 19 20 21 22  
Page  
23 24 2526 27 28 29  
1. USB Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
2. iPod Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
3. CD Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
6. RDM (Random) Indicator. . . . . . . . . . . . . . . . . . . 11  
7. MEM (Memory) Indicator . . . . . . . . . . . . . . . . . . . 11  
8. Repeat Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . 10  
9. Play/Pause Indicator . . . . . . . . . . . . . . . . . . . . . . 10  
10. Tuning FM Indicator. . . . . . . . . . . . . . . . . . . . . . . 15  
11. FM Stereo Mode Indicator. . . . . . . . . . . . . . . . . . 15  
12. Stereo Station Indicator . . . . . . . . . . . . . . . . . . . 15  
13. RDS Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
14. PTY Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
15. TP Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
16. TA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
17. Muting Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
18. X-bass Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
19. Title Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
20. Artist Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
21. Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
22. Album Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
23. File Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
24. Track Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
25. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . 18  
26. Once Timer Indicator. . . . . . . . . . . . . . . . . . . . . . 18  
27. Disc Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
28. Total Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12  
29. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Speaker system  
1. Dome-Tweeter  
2. Woofer  
3. Bass Reflex Duct  
4. Speaker Terminal  
1
3
2
4
Speaker grilles are removable  
Make sure nothing comes into contact  
with the speaker diaphragms when  
you remove the speaker grilles.  
Download from Www.Somanuals.cEom-3. All Manuals Search And Download.  
System connections  
Make sure to unplug the AC power lead before making any connections.  
Right  
speaker  
TV  
FM aerial  
Video cable  
(not supplied)  
To video input socket  
Left  
speaker  
Red  
Wall socket  
(AC 220 - 240 V ~ 50/60 Hz)  
Aerial connection  
Demonstration mode  
Supplied FM aerial:  
The first time the unit is plugged in, the unit will enter  
the demonstration mode.  
To cancel the demonstration mode, press the DEMO/  
DIMMER button (remote control) during power stand-  
by mode. The unit will enter the low power consumption  
mode.  
If iPod or iPhone is docked, the unit will begin charging.  
“Charge Mode” will be displayed. Demonstration mode  
is invalid during charge mode.  
To return to the demonstration mode, press the DEMO/  
DIMMER button again.  
Connect the FM aerial wire to the FM 75 OHMS socket and  
position the FM aerial wire in the direction where the  
strongest signal can be received.  
External FM aerial:  
Use an external FM aerial (75 ohms coaxial cable) for  
better reception. When an external FM aerial is used,  
disconnect the supplied FM aerial wire.  
Note:  
Placing the aerial on the unit or near the AC power lead  
may cause noise pickup. Place the aerial away from the  
unit for better reception.  
Speaker connection  
Connecting iPod or iPhone to TV  
For XL-HF201P(S)/(BK) – Connect  
the black wire to the minus (–)  
terminal, and the red wire to the  
plus (+) terminal.  
For XL-HF301P(S) – Connect the  
wire without insulation tube to the  
minus (–) terminal, and the wire with  
red insulation tube to the plus (+)  
terminal.  
Photo and video files from iPod or iPhone can be viewed  
by connecting the system to TV/monitor.  
If the TV/monitor has a video input, connect it to the VIDEO  
OUT socket at the back of the unit and set the TV Out on  
the iPod or iPhone unit to “ON” position.  
Note:  
Please make sure to set iPod unit to either NTSC or PAL to  
match your TV signal. Please visit Apple’s homepage for  
further information.  
Incorrect  
Connect the wire without insulation tube to the minus (–  
) terminal, and the wire with red insulation tube to the  
plus (+) terminal.  
Use speakers with an impedance of 4 ohms or more, as  
lower impedance speakers can damage the unit.  
Do not mistake the right and the left channels. The right  
speaker is the one on the right side when you face the  
unit.  
AC power connection  
After checking all the connections have been made  
correctly, plug the AC power lead of this unit into the wall  
socket.  
Do not let the bare speaker wires touch each other.  
Do not allow any objects to fall into or to be placed in  
the bass reflex ducts.  
Note:  
Do not stand or sit on the speakers. You may be  
injured.  
Unplug the AC power lead from the wall socket if the unit  
will not be in use for a prolonged period of time.  
Download from Www.Somanuals.cEom-4. All Manuals Search And Download.  
System connections (continued)  
Remote control  
Subwoofer pre-out connection  
Battery installation  
You can connect  
SUBWOOFER PRE OUT socket.  
a
subwoofer with an amplifier to the  
Open the battery cover.  
1
2
Insert the supplied battery according to the terminal  
indicated in the battery compartment.  
Commercially available subwoofer  
(amplifier built in)  
Audio cable  
(commercially  
available)  
When inserting or removing the battery, push it towards the  
(–) battery terminals.  
Audio signal  
Close the cover.  
3
To audio input  
socket  
ToSUBWOOFERPRE  
OUT socket  
Main  
unit  
Caution:  
Remove the battery if the unit will not be used for a long  
period of time. This will prevent potential damage due to  
battery leakage.  
Notes:  
Do not use rechargeable battery (nickel-cadmium battery,  
No sound is heard from the subwoofer without a built-in  
amplifier.  
etc.).  
Installing the battery incorrectly may cause the unit to  
malfunction.  
Subwoofer Pre-out (audio signal): 200mV / 10k ohms at  
70 Hz.  
Batteries (battery pack or batteries installed) shall not be  
exposed to excessive heat such as sunshine, fire or the  
like.  
Line input connection (TV, etc.)  
Notes concerning use:  
Connect to the TV using an audio cable  
.
Replace the battery if the operating distance is reduced or  
if the operation becomes erratic. Purchase an “AA” size  
battery (UM/SUM-3, R6, HP-7 or similar).  
To audio  
output sockets  
TV  
Periodically clean the transmitter on the remote control  
and the sensor on the unit with a soft cloth.  
Exposing the sensor on the unit to strong light may  
interfere with operation. Change the lighting or the  
direction of the unit if this occurs.  
Keep the remote control away from moisture, heat, shock,  
and vibrations.  
Audio cable  
(commercially  
available)  
Test of the remote control  
Check the remote control after checking all the connections.  
Point the remote control directly at the remote sensor on the  
unit. The remote control can be used within the range shown  
below:  
Remote sensor  
To LINE  
input  
sockets  
Main  
unit  
0.2 m - 6 m  
(8" - 20' )  
CD/USB  
RDS  
To select Line In function:  
On main unit: Press FUNCTION button repeatedly until  
Line In is displayed.  
On remote control: Press AUDIO/LINE (INPUT) button  
repeatedly until Line In is displayed.  
Download from Www.Somanuals.cEom-5. All Manuals Search And Download.  
General control  
Bass control  
1
Press the BASS/TREBLE button to select “Bass”.  
Within 5 seconds, press the VOLUME (+ or –) button to  
adjust the bass.  
2
........  
- 5 - 4  
↔ + 4 ↔ + 5  
Treble control  
CD/USB  
RDS  
1
2
Press the BASS/TREBLE button to select “Treble”.  
Within 5 seconds, press the VOLUME (+ or –) button to  
adjust the treble.  
To turn the power on  
Press the ON/STAND-BY button to turn the power on.  
........  
- 5 - 4  
↔ + 4 ↔ + 5  
After use:  
Function  
Press the ON/STAND-BY button to enter the power stand-  
by mode.  
When the FUNCTION button on main unit is pressed, the  
current function will change to different mode. Press the  
FUNCTION button repeatedly to select desired function.  
Display brightness control  
To dim the display brightness, press the DEMO/DIMMER  
button on the remote control.  
FM STEREO  
CD  
FM MONO  
(Display is dim).  
Dimmer 1  
Dimmer 2  
Dimmer off  
USB  
iPod  
Audio In  
Line In  
(Display gets dimmer).  
(Display is bright).  
Note:  
The backup function will protect the memorised function  
mode for a few hours should there be a power failure or the  
AC power lead becomes disconnected.  
Volume auto fade-in  
If you turn off and on the main unit with the volume set to 27  
or higher, the volume starts at 16 and fades in to the last set  
level.  
Setting the clock (Remote control only)  
Volume control  
Turn the volume knob towards VOLUME +/– (on main unit) or  
press VOL +/– (on remote control) to increase or decrease the  
volume.  
Auto power on function  
When you press any of the following buttons, the unit turns on.  
iPod, CD, USB, AUDIO / LINE (INPUT), TUNER on the  
remote control: Selected function is activated.  
CD/USB  
RDS  
/
button on the main unit: The unit turns on and play-  
back of the last function will start (CD, TUNER, USB, iPod,  
AUDIO IN, LINE IN)  
In this example, the clock is set for the 24-hour (0:00) display.  
Auto power off function  
1
2
3
Press the ON/STAND-BY button to turn the power on.  
Press the CLOCK/TIMER button.  
The main unit will enter the stand-by mode (when iPod or  
iPhone is not docked) after 15 minutes of inactivity during:  
iPod or iPhone: No connection.  
Within 10 seconds, press the ENTER button. To adjust  
CD / USB: In the stop mode.  
the day, press the  
ENTER button.  
or  
button and then press the  
AUDIO IN / LINE IN: No detection of input signal or very low  
sound audibility.  
Note:  
However, if iPod or iPhone is docked, the unit will begin  
charging. “Charge Mode” will be displayed.  
4
Press the  
or  
button to select 24-hour or 12-hour  
display and then press the ENTER button.  
The 24-hour display will appear.  
(0:00 - 23:59)  
Muting  
The 12-hour display will appear.  
(AM 12:00 - PM 11:59)  
The volume is muted temporarily when pressing the  
button  
on the remote control. Press again to restore the volume.  
The 12-hour display will appear.  
(AM 0:00 - PM 11:59)  
X-Bass control  
5 To adjust the hour, press the  
or  
button and then  
or button  
When the power is first turned on, the unit will enter the extra  
bass mode which emphasises the bass frequencies, and  
“X-BASS ON” will appear. To cancel the extra bass mode,  
press the X-BASS button on the remote control.  
press the ENTER button. Press the  
once to advance the time by 1 hour. Hold it down to  
advance continuously.  
Download from Www.Somanuals.cEom-6. All Manuals Search And Download.  
Setting the clock (Remote control  
only) (continued)  
iPod, iPhone and iPad connection (USB  
only)  
1 Insert the connector to the iPod, iPhone or iPad.  
6 To adjust the minutes, press the  
or  
button and  
or  
then press the ENTER button. Press the  
button once to advance the time by 1 minute. Hold it  
down to advance the time by 5 minutes interval.  
iPad  
To confirm the time display:  
Press the CLOCK/TIMER button. The time display will  
appear for about 5 seconds.  
Connector  
Note:  
When power supply is restored after unit is plugged in again  
or after a power failure, reset the clock (pages 6-7).  
2 Place the iPad to the stand for iPad.  
To readjust the clock:  
Perform “Setting the clock” from step 1. If the “Clock” does not  
appear in step 2, step 4 (for selecting the 24-hour or 12-hour  
display) will be skipped.  
iPad  
To change the 24-hour or 12-hour display:  
1 Clear all the programmed contents. [Refer to “Factory  
reset, clearing all memory” on page 21 for details.]  
Stand for iPad  
2 Perform “Setting the clock” from step 1 onwards.  
Listening to the iPod, iPhone or iPad  
3 Connect the iPod, iPhone or iPad to the unit via USB  
connector.  
Made for:  
USB  
th  
rd  
nd  
st  
iPod touch (4 generation)  
iPod touch (3 generation)  
iPod touch (2 generation)  
iPod touch (1 generation)  
iPod classic  
th  
th  
th  
rd  
iPod nano (6 generation)  
iPod nano (5 generation)  
iPod nano (4 generation)  
iPod nano (3 generation)  
nd  
iPod nano (2 generation)  
iPhone 4  
iPhone 3GS  
Note:  
iPhone 3G  
iPhone  
iPad  
USB terminal does not support VIDEO out.  
Caution:  
iPod, iPhone or iPad playback (USB)  
Please update your iPod, iPhone and iPad unit to the latest  
software version before using it. Please visit Apple’s  
homepage to download the latest version for your iPod,  
iPhone and iPad.  
1 Press the ON/STAND-BY button to turn the power on.  
2 Press the USB button on the remote control or  
FUNCTION button repeatedly on the main unit to select  
USB function.  
Notes:  
Charging terminal for iPod, iPhone and iPad:  
3 Connect iPod, iPhone or iPad to the unit. “USB/iPod” will  
Condition  
USB function  
Other function  
Stand-by  
DOCK  
NO  
YES  
YES  
USB  
YES  
NO  
appear.  
NO  
Track number  
The message This accessory is not made to work with  
iPhone” or similar, may appear on the iPhone screen  
when:  
4 Press the  
/
(CD/USB  
/
) button to start playback.  
- battery is low.  
- the iPhone is not properly docked (eg. slanting).  
If this occurs, remove and re-dock the iPhone.  
This product is made for iPhone. To prevent random  
interference when iPhone is docked, the headphone  
output is disabled, and “HP INVALID” will be  
displayed.  
You may also experience brief audio interference  
during incoming calls.  
Note:  
Stop button ( ) is invalid during iPod, iPhone or iPad play-  
back.  
iPhone playback  
Sound will only switch from iPhone to the main unit  
after authentication process is completed in  
approximately 10 seconds.  
Incoming calls will pause the playback.  
Once the calls are answered, the conversation can only  
be heard through the built-in iPhone speaker. Turn on  
the iPhone speaker or undock the iPhone to start  
conversation.  
The headphone output is switched off during inserting  
iPod, iPhone and iPad unit. This is an Apple product  
specification.  
Download from Www.Somanuals.cEom-7. All Manuals Search And Download.  
Listening to the iPod, iPhone or iPad (continued)  
iPod and iPhone connection (Dock only)  
iPod or iPhone playback (Dock)  
Note:  
1
2
Press the ON/STAND-BY button to turn the power on.  
Docking station is not recommended for iPad connection.  
Press the iPod or iPhone button on the remote control or  
FUNCTION button repeatedly on the main unit to select iPod  
function.  
Adaptor for iPod and iPhone connection  
Notes:  
Please use the adaptor supplied with your iPod or iPhone unit.  
You can use an audio cable to connect your iPod to the AUDIO  
3
4
Insert iPod or iPhone unit into the dock of main unit. “DOCK  
OK” will appear.  
IN socket if:  
1. your iPod adaptor does not fit into the iPod dock on the  
main unit.  
Press the  
playback.  
/
(iPod or iPhone  
/
)
button to start  
2. you have an iPod that does not have an iPod adaptor.  
3. you have an iPod that does not have an iPod 30 pin  
connector.  
Adaptor  
No.  
iPhone  
Description  
Capacity  
12  
15  
15  
19  
iPhone  
4GB & 8GB & 16GB  
8GB & 16GB  
16GB & 32GB  
16GB & 32GB  
iPhone 3G  
iPhone 3GS  
iPhone 4  
To insert adaptor for iPod or iPhone  
1 Open the docking station for iPod and iPhone by pulling  
up.  
CD/USB  
RDS  
To disconnect iPod, iPhone or iPad  
2 Insert the adaptor for iPod or iPhone into unit and  
connect your iPod or iPhone.  
Simply remove the iPod or iPhone from the docking station  
or iPad connector from USB terminal. It is safe to do so  
even during playback.  
iPhone  
iPhone (bottom)  
Watching videos on a TV connected to  
iPod or iPhone  
Dock connector  
1 Press the DISPLAY (TV OUT) button for more than 2  
seconds until “TV OUT ON” appear on display.  
Adaptor for iPhone  
Dock for iPhone  
2 Press the ENTER button to start playback.  
Notes:  
If the TV Out setting is already turned on at video menu,  
the video is automatically displayed on the TV screen  
when ENTER key is pressed.  
USB terminal does not support VIDEO OUT.  
To return to watching video on iPod or iPhone screen,  
press the MENU button to enter video menu. Then  
press the DISPLAY (TV OUT) button for more than 2  
seconds until “TV OUT OFF” appears.  
During iPod or iPhone video playback, pressing the  
DISPLAY (TV OUT) button will not toggle video out  
display between iPod and TV.  
Connector for iPhone  
Caution:  
Unplug all accessories from the iPod or iPhone before  
inserting it into the dock.  
To remove adaptor for iPod or iPhone  
Caution:  
Insert the tip of a screwdriver (“–” type,  
small) into the adaptor hole as shown  
and lift upward to remove.  
Unplug all accessories for the iPod or iPhone before  
inserting it into the docking station.  
Stop button ( ) at main unit is invalid during iPod  
function.  
Download from Www.Somanuals.cEom-8. All Manuals Search And Download.  
Listening to the iPod, iPhone or iPad  
(continued)  
Function Main unit  
Dock/USB  
Remote control  
Dock USB  
Operation  
iPod  
____  
____  
____  
Menu  
Press to view the  
iPod menu during  
iPod function.  
Navigating the iPod, iPhone or iPad  
menus  
Enter  
Presstoconfirmthe  
selection.  
1
Press the MENU button to view the menu on iPod, iPhone or  
iPad unit. Press it again to go back to previous menu.  
2
Use the PRESET ( or ) button to select an item on the  
menu and then press ENTER button.  
Cursor  
Up/Down  
Press to select the  
iPod menu.  
Note:  
When navigating the iPod, iPhone or iPad menu with remote  
control, do not operate any of the buttons on the iPod or iPhone  
unit. The volume level is adjusted by pressing the VOL (+ or –)  
button on the main unit or the remote control. Adjusting the  
volume on the iPod, iPhone or iPad units give no effect.  
Listening to a CD or MP3/WMA disc  
iPod, iPhone and iPad operations:  
The operations described below depend on the generation iPod,  
iPhone and iPad you are using.  
System on operation:  
When the main unit is powered on, the iPod, iPhone or iPad units  
will automatically power on when docked or connected in the unit.  
System off (stand-by operation):  
When the main unit is turned to stand-by mode, the docked iPod,  
iPhone or connected iPad unit will automatically turn to stand-by  
mode.  
Various iPod, iPhone and iPad functions  
Function Main unit  
Dock/USB  
Remote control  
Operation  
CD/USB  
RDS  
Dock  
USB  
Play  
Press in the pause  
mode.  
iPod  
CD/USB  
This system can play back a standard CD, CD-R/RW in the CD  
format and CD-R/RW with MP3 or WMA files, but cannot record  
on them. Some audio CD-R and CD-RW discs may not be  
playable due to the state of the disc or the device that was used  
for recording.  
Pause  
Press in the  
iPod  
CD/USB  
playback mode.  
Track up/  
down  
Press in the  
MP3:  
playback or pause  
mode.  
MP3 is a form of compression. It is an acronym which stands  
for MPEG Audio Layer 3. MP3 is a type of audio code which  
is processed by significant compression from the original  
audio source with very little loss in sound quality.  
If you press the  
button in the pause  
mode, press the  
/
button to start the  
desired track.  
This system supports MPEG 1 Layer 3 and VBR files.  
During VBR file playback, time counter in the display may  
differ from its actual playback time.  
Fast  
forward/  
reverse  
Press and hold  
down in the  
Bitrate which is supported by MP3 is 32 ~ 320 kbps.  
playback mode.  
Release the button  
to resume  
WMA:  
WMA files are Advanced System Format files that include  
audio files which are compressed with Windows Media  
Audio codec. WMA is developed by Microsoft as an audio  
format file for Windows Media Player.  
playback.  
____  
Display  
Press for more than  
2 seconds to toggle  
the video out  
iPod  
“MP3” and “WMA” indicator will light up after the unit reads  
information on an MP3 or WMA disc.  
display between  
iPod or TV.  
Bitrate which is supported by WMA is 64 ~ 160 kbps.  
Disc playback  
____  
____  
Repeat  
Shuffle  
Press to toggle  
repeat mode.  
1
2
Press the ON/STAND-BY button to turn the power on.  
Press to toggle  
shuffle mode.  
Press the CD button on the remote control or FUNCTION  
button repeatedly on the main unit to select CD function.  
3
4
Press the OPEN/CLOSE button to open the disc tray.  
Place the disc on the disc tray, label side up.  
Download from Www.Somanuals.cEom-9. All Manuals Search And Download.  
Listening to a CD or MP3/WMA disc  
(continued)  
Advanced CD or MP3/WMA disc  
playback  
5 Press the OPEN/CLOSE button to close the disc tray.  
CD/USB  
RDS  
6
Press the  
/
(CD/USB  
/
) button to start playback. After  
the last track is played, the unit will stop automatically.  
Caution:  
Do not place two discs in one disc tray.  
Direct track search  
Do not play discs of special shapes (heart, octagon, etc). It  
may cause malfunctions.  
By using the Numeric buttons, the desired tracks on the  
current disc can be played.  
Use the Numeric buttons on the remote control to select  
the desired track whilst playing the selected disc.  
Do not push the disc tray whilst it is moving.  
If the power fails whilst the tray is open, wait until the power  
is restored.  
If TV or radio interference occurs during CD operation, move  
the unit away from the TV or radio.  
Be sure to place 8 cm (3") disc in the middle of the disc tray.  
Due to the structure of the disc information, it takes longer to  
read an MP3/WMA disc than a normal CD (approximately 20  
to 90 seconds).  
The Numeric buttons allow you to select up to number 9.  
When selecting number 10 or higher, use the “10+” button.  
A. For example, to choose 13  
1
2
3
Press the “10+” button once.  
Press the “1” button.  
Notes for CD or MP3/WMA disc:  
Press the “3” button.  
When the end of the last track is reached during fast forward,  
“END” will appear on the display and CD operation will be  
paused. When the beginning of the first track is reached  
during fast reverse, the unit will enter the playback mode (only  
for CD).  
Rewritable multi-session discs with unfinished writing, can  
still be played.  
Selected track number  
B. For example, to choose 130  
1
2
3
4
Press the “10+” button twice.  
Press the “1” button.  
Press the “3” button.  
Press the “0” button.  
Various disc functions  
Notes:  
Function  
Play  
Main  
unit  
Remote  
control  
Operation  
A track number higher than the number of tracks on the  
disc cannot be selected.  
Press in the stop mode.  
During random play, direct search is not possible.  
To stop playback:  
Press the (CD/USB ) button.  
Stop  
Press in the playback  
mode.  
Repeat play  
Repeat play can play one track, all tracks or a programmed  
sequence continuously.  
Pause  
Press in the playback  
mode. Press the  
button to resume  
playback from the  
paused point.  
/
To repeat one track:  
Press the REPEAT button repeatedly until “Repeat One”  
appears. Press the  
/
(CD/USB  
/
) button.  
Track  
up/  
down  
To repeat all tracks:  
Press in the playback or  
stop mode.  
Press the REPEAT button repeatedly until “Repeat All”  
If you press the button in  
the stop mode, press the  
appears. Press the  
To repeat desired tracks:  
Perform steps 1 - 5 in “Programmed play” section on page 11  
and then press the REPEAT button repeatedly until “Repeat  
All” appears.  
/
(CD/USB  
/
) button.  
/
button to start the  
desired track.  
Fast  
forward/  
reverse  
Press and hold down in  
the playback mode.  
Release the button to  
resume playback.  
To cancel repeat play:  
Press the REPEAT button repeatedly until “Normal” appears  
and “  
” disappears.  
Caution:  
After performing repeat play, be sure to press the (CD/  
USB ) button. Otherwise, the disc will play continuously.  
E-10  
 
Advanced CD or MP3/WMA disc playback (continued)  
Random play  
Programmed play (MP3/WMA)  
The tracks on the disc can be played in random order  
automatically.  
1 Whilst in the stop mode, press the MEMORY button to  
enter the programming save mode.  
To random play all tracks:  
Press RANDOM button on the remote control until “Random”  
appears. Press the  
/
(CD/USB  
/
) button.  
To cancel random play:  
Press the RANDOM button again. “RDM” indicator will  
disappear.  
2 Press the PRESET (  
or  
) button on the remote  
control to select the desired folder.  
Notes:  
Then press the  
to select the desired tracks.  
or  
button on the remote control  
If you press the  
button during random play, you can  
button does not allow you to  
move to the track selected next by the random operation.  
On the other hand, the  
move to the previous track. The beginning of the track  
being played will be located.  
In random play, the unit will select and play tracks  
automatically. (You cannot select the order of the tracks.)  
3 Press the MEMORY button to save the folder and track  
number.  
Programmed play (CD)  
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32  
tracks can be programmed.  
You can choose up to 32 selections for playback in the order  
you like.  
5 Press the  
/
(CD/USB / ) button to start playback.  
1
Whilst in the stop mode, press the MEMORY button on the  
remote control to enter the programming save mode.  
To cancel the programmed play mode:  
During programmed stop mode, press the (CD/USB  
)
button. The display will show “Memory Clear” and all the  
programmed contents will be cleared.  
Adding tracks to the programme:  
2 Press the numeric button or  
or  
buttons on the  
If a programme has been previously stored, the “MEM”  
indicator will be displayed. Press the MEMORY button.  
Then follow steps 2 - 3 to add tracks.  
remote control to select the desired track.  
Notes:  
When a disc is ejected, the programme is automatically  
cancelled.  
Selected track number  
If you press the ON/STAND-BY button to enter the  
stand-by mode or change the function from CD to  
another, the programmed selections will be cleared.  
During the programme operation, random play is not  
possible.  
3
4
Press the MEMORY button to save the track number.  
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be  
programmed. If you want to check the programmed tracks,  
press the MEMORY button repeatedly. If you make a  
mistake, the programmed tracks can be cleared by  
pressing the CLEAR button.  
5 Press the  
/
(CD/USB / ) button to start playback.  
E-11  
 
MP3/WMA folder mode (only for MP3/WMA files)  
To play back MP3/WMA (Windows Media Audio) file  
There are many music sites on the internet that you can  
download MP3/WMA (Windows Media Audio) music files.  
Follow the instructions from the website on how to  
download the music files. You can then play back these  
downloaded music files by burning them to a CD-R/RW  
disc.  
Your downloaded song/files are for personal use only.  
Any other usage of the song without owner’s  
permission, is against the law.  
CD/USB  
RDS  
About folder playback order  
If MP3/WMA files are recorded in several folders, a folder  
number will be set to each folder automatically.  
Procedure to playback MP3/WMA disc with  
folder mode on  
These folders can be selected by the FOLDER button on  
the remote control. If there is no supported file formats  
inside the selected folder, the folder is skipped and the next  
folder will be selected.  
To play back CD-R/RW.  
1 Press the CD button, and load an MP3/WMA disc.  
Press the FOLDER button and disc info will be  
displayed.  
Example: How to set folder number if MP3/WMA format  
files are recorded as below figure.  
1 ROOT folder is set as folder 1.  
MP3 indicator  
TOTAL indicator  
WMA indicator  
2 As for folders inside ROOT folder (Folder A and Folder  
B), the folder which is recorded earlier on the disc will be  
set as folder 2 and folder 6.  
3 As for folder inside Folder A (Folder C and Folder D), the  
folder which is recorded earlier on the disc will be set as  
folder 3 and folder 4.  
Total number of folder Total number of files  
2 Press the PRESET ( or ) button to select desired  
playback folder. (Folder mode on)  
4 Folder E that is inside Folder D will be set as folder 5.  
FOLDER  
indicator  
The folder and file order information which is recorded  
on the disc depends on the writing software. There  
maybe possibilities that this unit will playback the files  
not according to our expected playback order.  
For CD MP3/WMA, 999 numbers of folders and files  
inclusive of the folders which have non playable files  
can be read.  
First track number  
in the folder  
FOLDER number  
3 Select desired file to be played back by pressing the  
or button.  
Folder mode on/off can be operated by the FOLDER  
button on the remote control. Files that are played when  
folder mode is set to the on position, may differ from those  
played back when folder mode is turned off.  
4 Press the  
/
(CD/USB / ) button. Playback will start  
and file name will be displayed.  
Title, Artist and Album name are displayed if they are  
recorded on the disc.  
In case of playback with the folder mode on, press  
the PRESET ( or ) button, and the folder can be  
selected even though it is in playback/pause mode.  
It will continue playback/pause mode in the 1st track  
of the selected folder.  
FILE 1  
ROOT  
FOLDER A  
FOLDER C  
FILE 2  
(FOLDER 1) (FOLDER 2) (FOLDER 3)  
FILE 3  
FOLDER D  
(FOLDER 4)  
FILE 4  
FILE 5  
FILE 6  
FOLDER E  
(FOLDER 5)  
FILE 7  
FILE 8  
Display content can be changed by pressing the CD/  
USB DISPLAY button.  
File name display  
Folder display  
Title display  
FOLDER B  
(FOLDER 6)  
FILE 9  
FILE 10  
Counter display  
Album display  
Artist display  
Note:  
If “Not Support” is displayed, it means “Copyright protected  
WMA file” or “Not supported playback file” is selected.  
E-12  
 
Listening to USB mass storage device/MP3 player  
2 Press the FOLDER button, and press the PRESET (  
or ) button to select desired playback folder. To start  
playback with folder mode on, go to step 4. To change  
the playback folder, press the PRESET ( or ) button  
to select another folder.  
3 Select desired file to be played back by pressing the  
or  
button.  
4 Press the  
/
(CD/USB  
/
)
button. Playback will start  
and the file name will be displayed.  
Title, Artist and Album name are displayed if they are  
recorded in the USB memory device.  
Display content can be changed by pressing the  
CD/USB DISPLAY button.  
CD/USB  
RDS  
To remove USB memory device  
1 Press the  
(CD/USB ) button to stop playback.  
2 Disconnect USB memory device from the USB terminal.  
Note:  
This product is not compatible with MTP and AAC file  
systems from USB mass storage device or MP3 player.  
To play back USB/MP3 player with folder  
mode off  
1 Press the USB button on the remote control or  
FUNCTION button repeatedly on main unit to select  
USB function. Connect the USB memory device that  
has MP3/WMA format files on the unit. When the USB  
memory is connected to the main unit, the device  
information will be displayed.  
Notes:  
SHARP will not be held liable for the loss of data whilst  
the USB memory device is connected to the audio  
system.  
Files compressed in MP3 and/or WMA format can be  
played back when connected to the USB terminal.  
This USB memory’s format supports FAT 16 or FAT 32.  
SHARP cannot guarantee that all USB memory  
devices will work on this audio system.  
USB cable is not recommended for use in this audio  
system to connect to USB memory device. Use of the  
USB cable will affect the performance of this audio  
system. iPod, iPhone and iPad is not prone to this  
condition.  
2 Select desired file to be played back by pressing the  
or  
button.  
This USB memory cannot be operated via USB hub.  
The USB terminal in this unit is not intended for a PC  
connection but is used for music streaming with a USB  
memory device.  
3 Press the  
/
(CD/USB  
/
) button. Playback will start  
and the file name will be displayed.  
External HDD-storage cannot be played back via USB  
terminal.  
Title, Artist and Album name are displayed if they are  
recorded in the USB memory device.  
If the data inside the USB memory is large, it may take  
longer time for the data to be read.  
This product can play WMA and MP3 files. It will  
Display content can be changed by pressing the  
CD/USB DISPLAY button.  
automatically detect the file type being played. If  
unplayable file is played on this product, “Not Support”  
is indicated and the file will be automatically skipped.  
This will take a few seconds. If abnormal indications  
appear on the display due to the unspecified file, turn  
off the unit and then turn it on again.  
Note:  
To pause playback:  
Press the (CD/USB / ) button.  
/
To play back USB/MP3 player with folder  
mode on  
This product relates to USB mass storage devices and  
MP3 players. It may however face some irregularities  
due to various unforeseen reasons from some devices.  
Should this happen, turn off the unit and then turn it on  
again.  
1 Press the USB button on the remote control or  
FUNCTION button repeatedly on main unit to select  
USB function. Connect the USB memory device that  
has MP3/WMA format files on the unit. When the USB  
memory is connected to the main unit, the device  
information will be displayed.  
During CD function, MP3 player will not be charging.  
E-13  
 
Advanced USB playback  
Listening to the radio  
The following functions are the same as CD  
operations:  
Page  
Direct track search. . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Programmed play (MP3/WMA) . . . . . . . . . . . . . . . . . .11  
Note:  
If USB memory device is not connected, “USB No Media”  
will be shown on the display.  
Notes:  
This unit only supports “MPEG-1 Audio Layer-3”  
format. (Sampling Frequency is 32, 44.1, 48kHz)  
Playback order for MP3 files may differ depending on  
the writing software used during file download.  
Bitrate which is supported by MP3 is 32~320 kbps,  
WMA is 64~160 kbps.  
CD/USB  
RDS  
For MP3/WMA files, please put “.MP3” “.WMA”  
extension. Files cannot be played back if there is no  
MP3/WMA extension.  
Playlists are not supported on this unit.  
This unit can display Folder Name or File Name up to  
32 characters.  
Tuning  
Maximum total number of MP3/WMA files is 65025.  
Total number of folders read is 999 including folder with  
non-playable file. However, the display shows only  
folder with MP3/WMA files.  
The display playback time may not be displayed  
correctly when playing back a variable bitrate file.  
The ID3TAG information supported are TITLE, ARTIST  
and ALBUM only. Title name, artist name and album  
name can be displayed by pressing the DISPLAY  
button during file playback or pause mode.  
WMA meta tag also supports title, artist and album  
name which are recorded in WMA files. Copyright  
protected WMA files cannot be played back.  
1 Press the ON/STAND-BY button to turn the power on.  
2 Press the TUNER button repeatedly to select FM Stereo  
or FM Mono.  
3 Press the TUNING (  
or  
) button on the remote  
control to tune in to the desired station.  
Manual tuning:  
Press the TUNING (  
or  
) button repeatedly to  
tune in to the desired station.  
Auto tuning:  
When the TUNING ( or  
) button is pressed for  
more than 0.5 seconds, scanning will start  
automatically and the tuner will stop at the first  
receivable broadcast station.  
Notes:  
When radio interference occurs, auto scan tuning may  
stop automatically at that point.  
Auto scan tuning will skip weak signal stations.  
To stop the auto tuning, press the TUNING ( or  
button again.  
)
When an RDS (Radio Data System) station is tuned in,  
the frequency will be displayed first, and then the RDS  
indicator will light up. Finally, the station name will  
appear.  
Full auto tuning can be achieved for RDS stations  
“ASPM”, see page 16.  
To receive an FM stereo transmission:  
Press the TUNER button to select stereo mode and  
“ST” indicator will be displayed. “  
” and “ ” will  
appear when an FM broadcast is in stereo.  
If the FM reception is weak, press the TUNER button to  
extinguish the “ST” indicator. The reception changes to  
monaural, and the sound becomes clearer.  
E-14  
 
Listening to the radio (continued)  
Using the Radio Data System (RDS)  
RDS is  
a
broadcasting service which  
a
growing  
Memorising a station  
number of FM stations provide. These FM stations  
send additional signals along with their regular  
programme signals. They send their station names,  
and information about the type of programme such as  
sport, music, etc.  
You can store 40 FM stations in memory and recall them  
at the push of a button. (Preset tuning)  
1 Perform steps 1 - 3 in “Tuning”.  
When tuned to an RDS station, “RDS” and the station  
name will be displayed.  
2 Press the MEMORY button.  
“TP” (Traffic Programme) will appear on the display when  
the received broadcast carries traffic information, and “TA”  
(Traffic Announcement) will appear whilst  
information is on air.  
a
traffic  
“PTYI” (Dynamic PTY Indicator) will appear whilst the  
Dynamic PTY station is received.  
3 Within 30 seconds, press the PRESET ( or ) button  
to select the preset channel number. Store the stations  
in memory, in order, starting with preset channel 1.  
4 Within 30 seconds, press the MEMORY button to store  
that station in memory. If the “MEMORY” and preset  
number indicators disappear before the station is  
memorised, repeat the operation from step 2.  
5 Repeat steps 1 - 4 to set other stations, or to change a  
preset station. When a new station is stored in the  
memory, the station previously memorised for that  
preset channel number will be erased.  
You can control the RDS by using the buttons on the  
remote control only.  
Note:  
Information provided by RDS  
The backup function protects the memorised stations for a  
few hours should there be a power failure or the AC power  
lead become disconnected.  
Each time the RDS DISPLAY button is pressed, the  
display will switch as follows:  
To recall a memorised station  
1 Press the PRESET ( or ) button for less than 0.5  
seconds to select the desired station.  
To scan the preset stations  
The stations saved in the memory can be scanned  
automatically. (Preset memory scan)  
CD/USB  
RDS  
1 Press the PRESET ( or ) button for more than 0.5  
seconds. The preset number will flash and the  
programmed stations will be tuned in sequentially, for 5  
seconds each.  
2 Press the PRESET (  
or  
) button again when the  
desired station is located.  
Station name (PS)  
Frequency  
Programme type (PTY)  
Radio text (RT)  
To erase entire preset memory  
1 Press the ON/STAND-BY button to enter the stand-by  
mode.  
When tuning in to a station other than an RDS station or  
to an RDS station which sends weak signal, the display  
will change in the following order:  
2 Whilst pressing down the  
button, press the ON/  
STAND-BY button until “Tuner Clear” appears.  
ON/STAND-BY  
No PS  
No PTY  
No RT  
FM 98.80 MHz  
E-15  
 
Using the Radio Data System (RDS) (continued)  
Notes for radio text:  
Using the Auto Station Programme  
Memory (ASPM)  
The first 14 characters of the radio text will appear for  
4 seconds and then they will scroll across the display.  
If you tune in to an RDS station which is not  
broadcasting any radio text, “No RT” will be displayed  
when you switch to the radio text position.  
Whilst radio text data is received or when the text  
contents change, “RT” will be displayed.  
Whilst in the ASPM operation mode, the tuner will  
automatically search for new RDS stations. Up to 40  
stations can be stored.  
If you have already stored some stations in memory, the  
number of new stations you can store will be less.  
To recall stations in memory  
1 Press the TUNER button on the remote control or  
FUNCTION button repeatedly on the main unit to  
select TUNER function.  
To specify programmed types and select stations  
(PTY search):  
You can search a station by specifying the programme type  
(news, sports, traffic programme, etc. ... see page 17) from  
the stations in memory.  
2 Press and hold down the RDS ASPM button on the  
remote control.  
1
After “ASPM” has flashed for about 4 seconds,  
scanning will start (87.50 - 108.00 MHz).  
1 Press the TUNER button on the remote control or  
FUNCTION button repeatedly on the main unit to  
select TUNER function.  
2 Press the RDS PTY button on the remote control.  
2
When an RDS station is found, “RDS” will appear  
for a short time and the station will be stored in  
memory.  
“SELECT” and “PTY TI” will appear alternately for  
about 6 seconds.  
3
After scanning, the number of stations stored in  
memory will be displayed for 4 seconds, and then  
“END” will appear for 4 seconds.  
3 Within 6 seconds, press the PRESET ( or ) button  
to select the programme type.  
Each time the button is pressed, the programme type  
will appear. If the button is held down for more than  
0.5 seconds, the programme type will appear  
continuously.  
To stop the ASPM operation before it is complete:  
Press the RDS ASPM button whilst it is scanning for stations.  
The stations which are already stored in memory will be kept  
there.  
4 Whilst the selected programme type is flashing (within  
6 seconds), press the RDS PTY button again.  
Notes:  
If the same station is broadcasting on different  
frequencies, the strongest frequency will be stored in  
memory.  
Any station which has the same frequency as the one  
stored in memory will not be stored.  
If 40 stations have already been stored in memory, the  
scan will be aborted. If you want to redo the ASPM  
operation, erase the preset memory.  
If no station have been stored in memory, “END” will  
appear for about 4 seconds.  
If the RDS signals are very weak, station names may  
not be stored in memory.  
The same station name can be stored in different  
channels.  
After the selected programme type has been lit for 2  
seconds, “SEARCH” will appear, and the search  
operation will start.  
Notes:  
If the display has stopped flashing, start again from  
step 2. If the unit finds a desired programme type, the  
corresponding channel number will lit for about  
8 seconds, and then the station name will remain it.  
If you want to listen to the same programme type of  
another station, press the RDS PTY button whilst the  
channel number or station name is flashing. The unit  
will look for the next station.  
In a certain area or during certain time periods, the  
station names may temporarily be different.  
Notes for RDS operation  
If any of the following events occur, it does not mean  
that the unit is faulty:  
“PS”, “No PS” and a station name appear alternately,  
and the unit does not operate properly.  
If a particular station is not broadcasting properly or a  
station is conducting tests, the RDS reception function  
may not work properly.  
When you receive an RDS station whose signal is too  
weak, information like the station name may not be  
displayed.  
If no station can be found, “NOT FOUND” will appear  
for 4 seconds.  
If you select the traffic programme:  
If you select the traffic programme (TP) in step 3, “TP” will  
appear.  
(This does not mean that you can listen to the traffic  
information at that time.)  
When the traffic information is broadcast, “TA” will appear.  
“No PS”, “No PTY” or “No RT” will flash for about 5  
seconds, and then the frequency will be displayed.  
E-16  
 
Using the Radio Data System (RDS) (continued)  
Descriptions of the PTY (Programme Type) codes, TP  
(Traffic Programme) and TA (Traffic Announcement)  
You can search for and receive the following PTY, TP and  
TA signals.  
RELIGION  
PHONE IN  
TRAVEL  
Any aspect of beliefs and faiths, involving  
a God or Gods, the nature of existence  
and ethics.  
Involving members of the public  
expressing their views either by phone or  
at a public forum.  
Features and programmes concerned  
with travel to near and far destinations,  
package tours and travel ideas and  
opportunities. Not for use for  
announcements about problems, delays,  
or roadworks affecting immediate travel  
where TP/TA should be used.  
NEWS  
Short accounts of facts, events and  
publicly expressed views, reportage and  
actuality.  
AFFAIRS  
Topical programme expanding or  
enlarging upon the news, generally in  
different presentation style or concept,  
including debate, or analysis.  
INFO  
Programmes whose purpose is to impart  
advice in the widest sense.  
LEISURE  
Programmes concerned with  
SPORT  
EDUCATE  
Programme concerned with any aspect  
of sport.  
Programme intended primarily to  
educate, of which the formal element is  
fundamental.  
recreational activities in which the  
listener might participate. Examples  
include, Gardening, Fishing, Antique  
collecting, Cooking, Food & Wine, etc.  
JAZZ  
Polyphonic, syncopated music  
characterised by improvisation.  
DRAMA  
All radio plays and serials.  
COUNTRY  
Songs which originate from, or continue  
the musical tradition of the American  
Southern States. Characterised by a  
straightforward melody and narrative  
story line.  
Current Popular Music of the Nation or  
Region in that country's language, as  
opposed to International “Pop” which is  
usually US or UK inspired and in English.  
Music from the so-called “golden age” of  
popular music.  
Music which has its roots in the musical  
culture of a particular nation, usually  
played on acoustic instruments. The  
narrative or story may be based on  
historical events or people.  
CULTURE  
Programmes concerned with any aspect  
of national or regional culture, including  
language, theatre, etc.  
Programmes about the natural sciences  
and technology.  
Used for mainly speech-based  
programmes usually of light-  
entertainment nature, not covered by  
other categories. Examples include:  
quizzes, panel games, personality  
interviews.  
SCIENCE  
VARIED  
NATION M  
OLDIES  
FOLK M  
POP M  
Commercial music, which would  
generally be considered to be of current  
popular appeal, often featuring in current  
or recent record sales charts.  
ROCK M  
EASY M  
Contemporary modern music, usually  
written and performed by young  
musicians.  
Current contemporary music considered  
to be “easy-listening”, as opposed to  
Pop, Rock or Classical, or one of the  
specialised music styles, Jazz, Folk or  
Country. Music in this category is often  
but not always, vocal, and usually of  
short duration.  
Classical music for general, rather than  
specialist appreciation. Examples of  
music in this category are instrumental  
music, and vocal or choral works.  
Performances of major orchestral works,  
symphonies, chamber music, etc., and  
including Grand Opera.  
DOCUMENT Programme concerned with factual  
matters, presented in an investigative  
style.  
TEST  
Broadcast when testing emergency  
broadcast equipment or receivers.  
Emergency announcement made under  
exceptional circumstances to give  
warning of events causing danger of a  
general nature.  
No programme type (receive only).  
Broadcasts which carry traffic  
announcements.  
ALARM!  
LIGHT M  
NONE  
TP  
CLASSICS  
OTHER M  
TA  
Traffic announcements are being  
broadcast.  
Musical styles not fitting into any of the  
other categories. Particularly used for  
specialist music of which Rhythm &  
Blues and Reggae are examples.  
WEATHER  
FINANCE  
Weather reports and forecasts and  
meteorological information.  
Stock Market reports, commerce,  
trading, etc.  
CHILDREN  
For programmes targeted at a young  
audience, primarily for entertainment  
and interest, rather than where the  
objective is to educate.  
SOCIAL  
Programmes about people and things  
that influence them individually or in  
groups. Includes: sociology, history,  
geography, psychology and society.  
E-17  
 
Timer and sleep operation (Remote control only)  
Timer playback  
Before setting timer:  
Check that the clock is set to the correct time (refer to  
page 6). If it is not set, you cannot use the timer  
function.  
For timer playback: Plug in USB or load discs or dock  
iPod to be played.  
CD/USB  
RDS  
1
Press the ON/STAND-BY button to turn the power on.  
Press and hold the CLOCK/TIMER button.  
2
3
Timer playback:  
Within 10 seconds, press the  
or  
button to  
The unit turns on and plays the desired source (CD,  
TUNER, USB, iPod, AUDIO IN, LINE IN) at a preset time.  
select “Once” or “Daily”, and press the ENTER button.  
4
5
Within 10 seconds, press the or button to  
select “Timer Set”, and press the ENTER button.  
This unit has 2 types of timer: ONCE TIMER and DAILY  
TIMER.  
Once timer:  
Once timer play works for one time only at a preset time.  
(“ ” indicator).  
To select the timer playback source (CD, TUNER, USB,  
iPod, AUDIO IN, LINE IN), press the  
or  
button.  
Press the ENTER button.  
When you select the tuner, select a station by pressing  
the or button, and then press the ENTER  
Daily timer:  
Daily timer play works at the same preset time every day  
that we set. For example, set the timer as a wake-up call  
every morning.  
button. If a station has not been programmed, “No  
Preset” will be displayed and timer setting will be  
cancelled.  
(“DAILY” indicator).  
6
7
8
9
To adjust the day, press the  
press the ENTER button.  
or  
button and then  
Using the once timer and daily timer in combination:  
For example, use the once timer to listen a radio  
programme, and use the daily timer to wake up.  
Press the ENTER button to adjust the hour. Press the  
or button and then press the ENTER button.  
1 Set the daily timer (pages 18 - 19).  
To adjust the minutes, press the  
then press the ENTER button.  
or  
button and  
2 Set the once timer (pages 18 - 19).  
Set the time to finish as in steps 7 and 8 above.  
1 minute or more  
10 Adjust the volume using the VOLUME control, and then  
press the ENTER button. Do not turn the volume up too  
high.  
Once timer  
Stop  
Start  
Daily timer  
Stop  
Start  
11 Press the ON/STAND-BY button to enter the power  
stand-by mode. The “TIMER” indicator lights up and  
the unit is ready for timer playback.  
12 When the preset time is reached, playback will start.  
The volume will increase gradually until it reaches the  
preset volume. The timer indicator will blink during  
timer playback.  
E-18  
 
Timer and sleep operation (Remote control only) (continued)  
Sleep operation  
13 When the timer end time is reached, the system will  
enter the power stand-by mode automatically.  
The radio, compact disc, iPod, USB, Audio In and Line In  
can all be turned off automatically.  
Once timer:  
The timer will be cancelled.  
1 Play back the desired sound source.  
Daily timer:  
The timer operates at the same time every selected day.  
It will continue until the daily timer setting is cancelled.  
Cancel the daily timer when it is not in use.  
2 Press the SLEEP button.  
3 Within 5 seconds, press the Numeric button to set the  
time. (1 minute ~ 99 minutes)  
Notes:  
4 “SLEEP” will appear.  
When performing timer playback using another unit  
connected to the USB terminal or AUDIO IN jack, select  
“USB” or “AUDIO IN” or “LINE IN” in step 5.  
This unit will turn on or enter the power stand-by mode  
automatically. However, the connected unit will not turn  
on or off. To stop the timer playback, follow step  
“Cancelling the timer setting” of this page.  
5 The unit will enter the power stand-by mode  
automatically after the preset time has elapsed. The  
volume will be turned down 1 minute before the sleep  
operation finishes.  
To confirm the remaining sleep time:  
Checking the timer setting:  
1 Whilst “SLEEP” is indicated, press the SLEEP button.  
1 Turn the power on and press and hold down the  
CLOCK/TIMER button.  
To cancel the sleep operation:  
Press the ON/STAND-BY button whilst “SLEEP” is  
indicated. To cancel the sleep operation without setting  
the unit to the stand-by mode, proceed as follows.  
2 Within 10 seconds, press the  
or  
button to select  
“Once” or “Daily”, and press the ENTER button.  
3 Within 10 seconds, press the  
“Timer Call”, and press the ENTER button.  
or button to select  
1 Whilst “SLEEP” is indicated, press the SLEEP button.  
2 Within 5 seconds, press the “0” button twice until  
“SLEEP 00” appears.  
Cancelling the timer setting:  
1 Turn the power on and press and hold down the  
CLOCK/TIMER button.  
To use timer and sleep operation together  
2 Within 10 seconds, press the  
“Once” or “Daily”, and press the ENTER button.  
or  
button to select  
Sleep and timer playback:  
For example, you can fall asleep listening to the radio and  
wake up to CD in the next morning.  
3 Within 10 seconds, press the  
or button to select  
“Timer Off”, and press the ENTER button. Timer will be  
cancelled (the setting will not be cancelled).  
1 Set the sleep time (see above, steps 1 - 5).  
2 Whilst the sleep timer is set, set the timer playback  
(steps 2 - 9, page 18).  
Reusing the memorised timer setting:  
The timer setting will be memorised once it is entered. To  
reuse the same setting, perform the following operations.  
Timer playback  
setting  
End  
time  
Sleep timer  
setting  
1 Turn the power on and press and hold down the  
CLOCK/TIMER button.  
1-99 minutes  
Desired time  
2 Within 10 seconds, press the  
or  
button to select  
“Once” or “Daily”, and press the ENTER button.  
Sleep operation will  
automatically stop  
Timer playback  
start time  
3 Within 10 seconds, press the  
“Timer On” , and press the ENTER button.  
or button to select  
4 Press the ON/STAND-BY button to enter the power  
stand-by mode.  
E-19  
 
Enhancing your system  
Troubleshooting chart  
The connection lead is not included. Purchase  
commercially available lead as shown below.  
a
Many potential problems can be resolved by the owner  
without calling a service technician.  
If something is wrong with this product, check the following  
before calling your authorised SHARP dealer or service  
centre.  
General  
Symptom  
Possible cause  
The clock is not set Did a power failure occur?  
to the correct time.  
Reset the clock. (Refer  
page 6)  
When a button is  
pressed, the unit  
does not respond.  
Set the unit to the power  
stand-by mode and then  
turn it back on.  
If the unit still malfunctions,  
reset it. (Refer page 21)  
Portableaudio  
player, etc.  
No sound is heard.  
Is the volume level set to  
“Min”?  
Audio cable (not supplied)  
Are the headphones  
connected?  
Are the speaker wires  
disconnected?  
Listening to the playback sounds of  
portable audio player, etc.  
CD player  
Symptom  
1 Use a connection lead to connect the portable audio  
player etc. to the AUDIO IN socket. When using video  
equipment, connect the audio output to this unit and the  
video output to a television.  
Possible cause  
Playback does not  
start.  
Playback stops in  
the middle or is not  
Is the disc loaded upside  
down?  
Does the disc satisfy the  
standards?  
2 Press the ON/STAND-BY button to turn the power on.  
3 Press the AUDIO/LINE (INPUT) button on the remote  
control or FUNCTION button repeatedly on main unit to  
select AUDIO IN function.  
performed properly. Is the disc distorted or  
scratched?  
4 Play the connected equipment. If volume level of the  
connected device is too high, sound distortion may  
occur. Should this happen, lower the volume of the  
connected device. If volume level is too low, increase the  
volume of the connected device.  
Playback sounds are Is the unit located near  
skipped, or stopped  
in the middle of a  
track.  
excessive vibrations?  
Is the disc very dirty?  
Has condensation formed  
inside the unit?  
Note:  
To prevent noise interference, place the unit away from the  
television.  
Remote control  
Symptom  
Headphones  
Possible cause  
Do not turn the volume on to full at switch on and listen  
to music at moderate levels. Excessive sound pressure  
from earphones and headphones can cause hearing  
loss.  
Before plugging in or unplugging the headphone,  
reduce the volume.  
Be sure your headphone has a 3.5 mm (1/8") diameter  
plug and impedance between 16 and 50 ohms. The  
recommended impedance is 32 ohms.  
Plugging in the headphone disconnects the speakers  
automatically. Adjust the volume using the VOLUME  
control.  
The remote control  
Is the AC power lead of the  
unit plugged in?  
does not operate.  
Is the battery polarity  
correct?  
Are the batteries dead?  
Is the distance or angle  
incorrect?  
Does the remote control  
sensor receive strong  
light?  
Tuner  
Symptom  
Possible cause  
The radio makes  
unusual noises  
continuously.  
Is the unit placed near the  
TV or computer?  
Is the FM aerial placed  
properly? Move the aerial  
away from the AC power  
lead if it is located nearby.  
E-20  
 
Troubleshooting chart (continued)  
If such a problem occurs, do the following:  
1 Set the unit to the stand-by mode and turn the power on  
again.  
2 If the unit is not restored in the previous operation,  
unplug and plug in the unit again, and then turn the  
power on.  
USB  
Symptom  
Possible cause  
Is there any MP3/WMA file  
available?  
Is the device properly  
connected?  
Is it an MTP device?  
Does the device contain  
AAC file only?  
Device cannot be  
detected.  
Note:  
If neither operation above restores the unit, clear all the  
memory by resetting it.  
Playback does not Is it a copyright protected  
Factory reset, clearing all memory  
start.  
WMA file?  
Is it a false MP3 file?  
1 Press the ON/STAND-BY button to enter the power  
stand-by mode.  
Wrong time display. Is Variable Bitrate file being  
played back?  
Wrong file name  
display.  
2 Whilst pressing down the OPEN/CLOSE button, press  
Is the File Name written in  
Chinese or Japanese  
characters?  
the ON/STAND-BY button until “Clear All” appears.  
iPod, iPhone or iPad  
Caution:  
This operation will erase all data stored in memory  
including clock, timer settings and tuner preset.  
Symptom  
Possible cause  
The iPod, iPhone or iPad is  
not playing.  
The iPod, iPhone or iPad is  
not properly connected to  
the unit.  
Is the AC power lead of the  
unit plugged in?  
No sound is  
produced.  
No image appears  
on the TV/monitor.  
Before transporting the unit  
Remove the iPod, iPhone, iPad, USB memory device and  
disc from the unit. Then, set the unit to the power stand-by  
mode. Carrying the unit with iPod, iPhone, iPad or USB  
memory device left connected or discs left inside might  
damage the unit.  
The video cable is not  
properly connected.  
The TV/monitor’s input  
selection is not properly set.  
The iPod TV out feature has  
not been set to output video.  
USB terminal do not support  
video.  
Care of compact discs  
Compact discs are fairly resistant to damage, however  
mistracking can occur due to an accumulation of dirt on the  
disc surface. Follow the guidelines below for maximum  
enjoyment from your CD collection and player.  
Do not write on either side of the disc, particularly the  
non-label side from which signals are read. Do not  
mark this surface.  
Keep your discs away from direct sunlight, heat, and  
excessive moisture.  
Always hold the CDs by the edges. Fingerprints, dirt, or  
water on the CDs can cause noise or mistracking. If a  
CD is dirty or does not play properly, clean it with a soft,  
dry cloth, wiping straight out from the centre, along the  
radius.  
iPod, iPhone or  
iPad will not  
charge.  
The iPod, iPhone or iPad is  
not making full contact with  
the connector.  
rd  
Using iPod (3 generation).  
The iPod or iPhone is not  
supported. Refer to page 7  
for compatible models.  
This accessory is  
not made to work  
with iPhone or  
The iPhone battery is low.  
Please charge the iPhone.  
iPhone is not properly  
docked.  
“This accessory is  
not supported by  
iPhone” appears on  
iPhone screen.  
NO  
YES  
Correct  
Condensation  
Sudden temperature changes, storage or operation in an  
extremely humid environment may cause condensation  
inside the cabinet (CD pickup, etc.) or on the transmitter on  
the remote control. Condensation can cause the unit to  
malfunction. If this happens, leave the power on with no  
disc in the unit until normal playback is possible (about 1  
hour). Wipe off any condensation on the transmitter with a  
soft cloth before operating the unit.  
Maintenance  
Cleaning the cabinet  
Periodically wipe the cabinet with a soft cloth and a diluted  
soap solution, then with a dry cloth.  
Caution:  
If problem occurs  
Do not use chemicals for cleaning (petrol, paint thinner,  
etc.). It may damage the cabinet.  
Do not apply oil to the inside of the unit. It may cause  
malfunctions.  
When this product is subjected to strong external  
interference (mechanical shock, excessive static  
electricity, abnormal supply voltage due to lightning, etc.)  
or if it is operated incorrectly, it may malfunction.  
E-21  
 
Specifications  
As part of our policy of continuous improvement, SHARP  
reserves the right to make design and specification  
changes for product improvement without prior notice. The  
performance specification figures indicated are nominal  
values of production units. There may be some deviations  
from these values in individual units.  
USB (MP3 / WMA)  
USB host interface Complies with USB 1.1 (Full  
Speed)/2.0 Mass Storage  
Class.  
Support Bulk only and CBI  
protocol.  
General  
Support file  
Bitrate support  
Other  
MPEG 1 Layer 3  
WMA (Non DRM)  
Power source  
AC 220 - 240 V ~ 50/60 Hz  
MP3 (32 ~ 320 kbps)  
WMA (64 ~ 160 kbps)  
Power  
consumption  
Power on: 40 W  
Power stand-by: 0.4 W (*)  
Maximum total number of  
MP3/WMA files is 65025.  
Maximum total number of  
folders is 999 INCLUSIVE of  
root directory.  
The ID3TAG information  
supported are TITLE, ARTIST  
and ALBUM only.  
Supports ID3TAG version 1  
and version 2.  
Dimensions  
Width: 215 mm (8 - 1/2")  
Height: 96 mm (3 - 4/5")  
Depth: 335 mm (13 - 1/5")  
Weight  
2.6 kg (5.7 lbs.)  
( * ) This power consumption value is obtained when the  
demonstration mode is cancelled in the power stand-by  
mode. Refer to page 4 to cancel the demonstration mode.  
File system  
support  
Support USB devices with  
Microsoft Windows/DOS/FAT  
12/FAT 16/ FAT 32.  
Amplifier  
2 kbyte block length for sector.  
Output power  
PMPO: 200 W  
MPO: 100 W (50 W + 50 W)  
(10% T.H.D.)  
Tuner  
RMS: 100 W (50 W + 50 W)  
(10% T.H.D.)  
RMS: 66 W (33 W + 33 W)  
(1% T.H.D.)  
Frequency range  
Preset  
FM: 87.5 - 108 MHz  
40 (FM station)  
Output terminals Speakers: 4 ohms  
20Hz - 20kHz  
Subwoofer Pre-out (audio signal):  
Speaker (XL-HF201PH)  
200 mV/10 k ohms at 70 Hz  
Video output: 1 Vp-p  
Type  
2-way type speaker system  
2.5 cm (1") Dome-Tweeter  
12 cm (4-3/4") woofer  
Headphones: 16 - 50 ohms  
(recommended: 32 ohms)  
Input terminals  
Audio In (audio signal):  
500 mV/47 k ohms  
Line in (Analogue input):  
500 mV/47 k ohms  
Maximum input  
power  
100 W  
Rated input power 50 W  
Impedance  
Dimensions  
4 ohms  
CD player  
Width: 148 mm (5-13/16")  
Height: 262 mm (10-5/16")  
Depth: 203.5 mm (8")  
Type  
Single disc multi-play compact disc  
player  
Weight  
2.5 kg (5.4 lbs.)/each  
Signal readout  
D/A converter  
Non-contact, 3-beam  
semiconductor laser pickup  
Speaker (XL-HF301PH)  
Multi bit D/A converter  
20 - 20,000 Hz  
Frequency  
response  
Type  
2-way type speaker system  
2.5 cm (1") Dome-Tweeter  
13 cm (5-1/8") woofer  
Dynamic range  
90 dB (1 kHz)  
Maximum input  
power  
100 W  
Rated input power 50 W  
Impedance  
Dimensions  
4 ohms  
Width: 160 mm (6-5/16")  
Height: 280 mm (11-1/16")  
Depth: 289 mm (11-3/8")  
Weight  
4.2 kg (9.3 lbs.)/each  
E-22  
 

Sharp Flat Panel Television 9JDJ3BX0131A User Manual
Sharp Stereo System CD MPS660E User Manual
Singer Sewing Machine 132B26 User Manual
Sony Camcorder 4264385111 User Manual
Sony Car Stereo System MEX DV2000 User Manual
Sony DVD VCR Combo SLV D300P User Manual
Soundstream Technologies Stereo Equalizer BX 4EQ User Manual
SteelEye Work Light 450 User Manual
Stoelting Freezer U421 U444 User Manual
Stovax Indoor Fireplace Logic Hotbox Convector Fire User Manual