Model A56D
Microphone Drum Mount
User Guide
GENERAL
The Shure A56D mounts microphones on a drum or cymbal. It
fits stand adapters with a 5/8-in, 27-thread. An L-adapter extension
curves at a 90L angle for optimum microphone placement.
The clamp fits drum rims measuring from 1/2-in. (12.7 mm) to 2
1/4 -in. (57.2 mm) in height, or on cymbal stands measuring from
3/8-in. (9.5 mm) to 1 1/8-in. (28.6 mm) in diameter.
DRUM RIM MOUNTING
CYMBAL STAND MOUNTING
ᕣ
ᕡ
ᕢ
ᕣ
ᕤ
ᕢ
ᕡ
REPLACEMENT PARTS
NOTE: To minimize potential noise or damage, position the
microphone outside the drummer's range of stick movement
and cymbal movement.
Clamp Assembly . . . . . . . . . . . . RPM618
Jaw . . . . . . . . . . . . . . . . . . . . . . . . 32A866
L-Adapter Extension . . . . . . . . . 90A4646
5/8”–27 Lock Nut (Large) . . . . . 31A1857
5/8”–27 Lock Nut (Small) . . . . . 31B1770
5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.
In U.S.A., Phone: 1-847-600-2000 Fax: 1-847-600-1212
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
In Asia, Phone: 1-852-2893-4290 Fax: 1-852-2893-4055
International Fax: 1-847-600-6446
©2003 Shure Incorporated
27B3086 (Rev. 3)
Printed in U.S.A.
|