Premier Series
K7
Snell Signature Series loudspeakers - K7
Is BiggerAlways Better?...Can Speakers Be Beautiful
The Snell Series 7 loudspeakers reveal the
depth, impact and nuance in every music and
movie soundtrack without the obtrusive look
and placement conflicts of typical speakers.
Handcrafted in Massachusetts from real wood
and solid aluminum, the elegant Series 7 with its
soft lines and superb finish plays perfect host to
the technology inside.
K7 Style and room architecture play a bigger role
in home entertainment decisions than ever
before.The smallest of the Series 7,the K7 is
designed to perform,regardless of placement,and
integrate with most decor. Based on newly
developed, high performance drivers from
SEAS,and (quite) a bit of magic from Snell ’s chief
engineer, Joe D ’Appolito Ph.D., the K7 betters its
award winning predecessor, the K.5mk2,in half
the physical size. Fine tuned with an individually calibrated crossover, the shoe-box sized K7
plays music and movies at concert hall levels, with startling dimension and clarity.
Dimensions:
12” High
7” Wide
10.5” Deep
Application Alternatives:
System Suggestions:
IW-K7 In Wall
CR7 Center
Basis150 Subwoofer
SR30 Surround
Like all Snell loudspeakers, each K7 is hand tuned for natural imaging and sonic depth.
Design:
Bass Reflex Monitor
with Rear Port
Tweeter
1-inch SEAS silk dome
Boundary compensation
"Normal" – When placed on
stands away from wall.
"Boundary"– When placed on
shelf or near wall.
End Caps
1/4" inch aluminum,
anodized black
(port requires 1.5" to back-wall)
Woofer
5.25-inch SEAS Treated Paper,
5 mm Excursion
Grille
Frequency Response
54Hz-20kHz ± 3dB
Perforated Steel with black
powder-coat paint.
Wiring
77Hz-20kHz ± 3dB
Video Shielding
Bi-amp, bi-wire ready
@ 12dBOctave w/ Port Plug
Yes
Finishes
Connections
Hand-sanded natural Cherry.
Black-painted Walnut. Can
be ordered in most wood
and paint finishes.
Sensitivity
Crossover Frequency
5-way, satin nickel-plated, brass
terminals. Accepts 5/16's
spades, pins, banana plugs and
bare wire to 12 gauge.
[1 Watt (2.83v) @ 1m]
87 dB
2.5 kHz
Crossover
Impedance
Nominal 8 Ohms
Discrete Tweeter and Woofer
circuit boards. Time alignment and
coherency are achieved through
the transition region from driver to
driver. Each crossover is
individually tuned by our
technicians to ± 0.5db of the
Master Reference.
Weight
17 lbs.
Cabinet Construction
Hardwood veneer over 5/8-inch
MDF Panels. Full length brace
with integrated port flare.
Radiused 1.25-inch satin-black
MDF baffle.
Maximum Output
105 dB
Recommended Power
50 Watts minimum
150 Watts maximum
Manufactured in the USA by Snell Acoustics, Peabody MA 01960 • www.snellacoustics.com • 978-538-6262 • © Snell Acoustics, Inc • All specifications subject to change without notice.
|