Sony Camera Lens SAL 135F28 User Manual

– Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
Condensation  
If your lens is brought directly from a cold place to a warm place,  
condensation may appear on the lens. To avoid this, place the lens in a plastic  
bag or something similar. When the air temperature inside the bag reaches  
the surrounding temperature, take the lens out.  
2-685-150-11(1)  
– Consult the dealer or an experienced radio/TV technician for help.  
For the customers in Canada  
This Class B digital apparatus complies with Canadian ICES-003.  
Cleaning the lens  
Lens for Digital Single Lens  
• Do not touch the surface of the lens directly.  
Reflex Camera  
Notes on use  
• Do not leave the lens in direct sunlight. If sunlight is focused onto a nearby  
object, it may cause a fire. If circumstances necessitate leaving the lens in direct  
sunlight, be sure to attach the lens cap.  
• If the lens gets dirty, brush off dust with a lens blower and wipe with a soft,  
clean cloth (Cleaning Cloth KK-CA (optional) is recommended).  
• Do not use any organic solvent, such as thinner or benzine, to clean the lens or  
the camera cone.  
Operating Instructions  
• Be careful not to subject the lens to mechanical shock while attaching it.  
• Always place the lens caps on the lens when storing.  
• Do not keep the lens in a very humid place for a long period of time to prevent  
mold.  
135mm F2.8 [T4.5] STF  
• Do not hold the camera by the lens part extended for focusing, etc.  
• Do not touch the lens contacts. If dirt, etc., gets on the lens contacts, it may  
interfere or prevent the sending and receiving of signals between the lens and the  
camera, resulting in operational malfunction.  
SAL135F28  
©2006 Sony Corporation Printed in Japan  
Names of parts  
1
2
3
4
1···Focusing ring 2···Distance scale 3···Stepless  
aperture range 4···Lens contacts 5···Mounting index  
6···A position 7···Aperture ring 8···Distance index  
9···Depth-of-field scale  
5
This lens is a manual focus lens with a highly developed defocusing  
design. A special apodization element gives defocused areas a smooth and  
attractive appearance. This lens is equipped with the aperture ring that  
enables a stepless aperture setting between F No.2.8-5.7 (T No.4.5-6.7*), and  
makes the most of the defocusing effect in the foreground and background  
areas. Enjoy this unique image-expression, which cannot be duplicated on  
traditional lenses.  
6
9 8  
7
Attaching/detaching the lens  
To attach the lens  
* T No. (T-Numbers) : the T No. is a practical value that indicates how much  
light is in the lens, allowing for the lens’s transmission rate. Although this  
lens’s wide-open aperture is f/2.8, the special apodization system provides the  
light amount of T/4.5, which is the same as that of f/4.5 on a normal lens. The  
aperture value on the lens, the value indicated on a camera, and the value used  
when determining the exposure are all indicated by T No. Use the T No. as a  
normal aperture value.  
1
Remove the rear and front lens caps and the camera body cap.  
You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the  
lens cap with the lens hood attached, use method (2).  
This lens is designed for Sony  
cameras.  
(1)  
(2)  
WARNING  
To reduce fire or shock hazard, do not expose the unit to rain or moisture.  
Do not directly look at the sun through this lens.  
Doing so might harm your eyes or cause loss of eyesight.  
Keep the lens out of reach of small children.  
2
Align the orange index on the lens barrel with the orange index on the  
camera (mounting index), then insert the lens into the camera mount and  
rotate it clockwise until it locks.  
There is danger of accident or injury.  
Disposal of Old Electrical & Electronic Equipment  
(Applicable in the European Union and other  
European countries with separate collection  
systems)  
• Do not press the lens release button on the camera when mounting the lens.  
• Do not mount the lens at an angle.  
This symbol on the product or on its packaging indicates that  
this product shall not be treated as household waste. Instead it  
shall be handed over to the applicable collection point for the  
recycling of electrical and electronic equipment. By ensuring this product is  
disposed of correctly, you will help prevent potential negative consequences  
for the environment and human health, which could otherwise be caused  
by inappropriate waste handling of this product. The recycling of materials  
will help to conserve natural resources. For more detailed information  
about recycling of this product, please contact your local Civic Office, your  
household waste disposal service or the shop where you purchased the  
product.  
To remove the lens  
While pressing and holding the lens release button on the camera, rotate the  
lens counterclockwise until it stops, then detach the lens.  
Attaching the lens hood  
It is recommended that you use a lens hood to reduce flare and ensure maximum image  
quality.  
For the customers in the U.S.A.  
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.  
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:  
Align the lens hood with the tip of the lens and rotate it clockwise.  
• When using a built-in camera flash, make sure to remove the lens hood to avoid blockage of the  
flash light.  
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,  
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE  
RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE  
UNDESIRED OPERATION.  
• When storing, turn over the lens hood and place it onto the lens backwards.  
CAUTION  
Focusing  
This lens is a manual-focus lens.  
You are cautioned that any changes or modifications not expressly approved  
in this manual could void your authority to operate this equipment.  
1
Select manual-focus mode on your camera.  
• Refer to the camera manual for details.  
NOTE:  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses, and can radiate  
radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications.  
• This lens can be used in manual-focus mode, even if your camera is set to autofocus mode.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
2
Turn the focusing ring until the image appears sharp.  
• The focus signal found in the viewfinder does not work.  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and receiver.  
 

Sharp Car Stereo System CD C482 User Manual
Sharp Fax Machine Version 25 User Manual
Sharp Flat Panel Television LC 15SH1M User Manual
Sonic Alert Medical Alarms TR75VR User Manual
Sony CD Player 480p User Manual
Sony Clock Radio ICFC11IPBLK User Manual
Sony Stereo Receiver STR DE685 User Manual
Sony VCR SLV 469 User Manual
Spectrum Brands Computer Hardware MC31XX User Manual
Swisher Lawn Mower 12268 User Manual