NWZ-A810 series: NWZ-A815/A816/A818
NWZ-A820 series: NWZ-A826/A828/A829/
A826K/A828K/A829K
The “WALKMAN” / Sony Ericsson Phone
cannot be operated with this unit.
Notes on radio reception
To change the sleep timer setting
You can press SLEEP repeatedly to select the
desired sleep timer setting even after the sleep
timer has been activated.
4-155-637-12(1)
To activate Automatic DST/Summer Time
adjustment again, press and hold CLOCK and
SNOOZE/DATE/SLEEP OFF at the same time
at least 2 seconds.
6 If “A” or “B” does not appear in the
To Play a Sony Ericsson
Phone
Keep digital music players or mobile phones
display, press ALARM TIME SET A or B
Make sure the “WALKMAN” or Sony Ericsson
away from the AM loop antenna or the FM
antenna, as this may lead to reception
interference.
again.
Phone is securely connected.
1 Set your Sony Ericsson Phone on the
The “WALKMAN” / Sony Ericsson Phone will
sound at the set time. With the alarm mode
set to “WALKMAN” / Sony Ericsson Phone,
when the alarm time met, if “WALKMAN” or
Sony Ericsson Phone is not attached to the
unit, the alarm sound will be the buzzer.
Make sure the Sony Ericsson Phone is listed in
“Compatible Sony Ericsson Phone models” .
“
” and “On” appear in the display to show
unit.
To deactivate the sleep timer
Press SLEEP repeatedly to set the sleep timer to
“OFF” in step 2.
When you are listening to the radio with a Sony
that Automatic DST/Summer Time adjustment
has been activated. The display returns to the
clock.
The connector indicator blinks in a few
seconds and then stays lit (green).
When your Sony Ericsson Phone is off, or if it
is listed in “Compatible Sony Ericsson Phone
models” , the indicator will turn red. In
this case, only battery charge function will be
available (see “To use the unit as a battery
charger”).
Ericsson Phone connected to the unit,
interference with radio reception may occur.
The “WALKMAN” / Sony Ericsson Phone
cannot be charged.
Models using the Type B attachment
(supplied with this unit)
NWZ-S510 series: NWZ-S515/S516
NWZ-S610 series: NWZ-S615F/S616F/S618F
NWZ-S710 series: NWZ-S715F/S716F/S718F
NWZ-X1000 series: NWZ-X1050/X1060
CR2025
When you are listening to the radio while
charging a “WALKMAN” / Sony Ericsson
Phone, interference with radio reception may
occur.
Make sure the “WALKMAN” or Sony Ericsson
Phone is securely connected.
Connecting external
equipment
Notes
Setting the clock manually
1 Plug in the unit.
2 Press and hold CLOCK for at least 2
The indicator turns red when a compatible
Sony Ericsson Phone (listed in “Compatible
Sony Ericsson Phone models” or ) is set
in the unit.
Select music library on your “WALKMAN” /
Sony Ericsson Phone with it connected to this
unit when you set the alarm mode to
Notes
To listen to sound
Playing a “WALKMAN”
/ Sony Ericsson Phone
“WALKMAN” / Sony Ericsson Phone.
Power on the “WALKMAN” / Sony Ericsson
Phone before connecting to this unit.
The unit cannot operate while the connector
seconds.
Make sure the Sony Ericsson Phone is on.
FM wire antenna
Notes
1 Connect the AUDIO IN jack of the unit
to the line out jack or headphone jack of
the external equipment using the audio
connecting cable (supplied).
indicator is blinking.
The year starts to flash in the display.
Do not attempt to charge the battery.
If you are not going to use the remote
commander for a long time, remove the battery
to avoid any damage that may be caused by
leakage and corrosion.
The indicator turns on (green), but the Sony
Ericsson Phone does not operate.
If the indicator does not stay lit, remove the
Sony Ericsson Phone and set again.
Set Bluetooth function to off on the Sony
Ericsson Phone.
3 Press ALARM TIME SET + or –
You can enjoy “WALKMAN” / Sony Ericsson
Phone music by connecting to this unit. To use a
“WALKMAN” / Sony Ericsson Phone, refer to the
user’s guide of your “WALKMAN” / Sony
Ericsson Phone.
FM/AM
Setting the radio alarm
Tip
repeatedly to set the year.
Make sure the Sony Ericsson Phone is a
The type of attachment is located on the bottom.
compatible model (listed in “Compatible Sony
1 Perform steps 1 to 8 in “To set the
alarm.”
4 Press CLOCK.
AC power
cord
On copyrights
Ericsson Phone models” or ).
2 Press (play).
5 Repeat steps 3 and 4 to set the month,
Clock Radio
“WALKMAN” and
are
“
” appears in the display.
2 Press ALARM TIME SET A or B to select
When Daylight Saving Time (summer time)
begins, the clock does not employ the
Daylight Saving Time automatically.
day, hour and minute, and then press
registered trademarks of Sony Corporation.
All other trademarks and registered trademarks
are trademarks or registered trademarks of
their respective holders. In this manual,
and marks are not specified.
The Sony Ericsson Phone begins to play
automatically. You can operate the connected
Sony Ericsson Phone by this unit or the Sony
Ericsson Phone buttons.
To select the connector of the
“WALKMAN” / Sony Ericsson
Phone
“RADIO” alarm mode.
CLOCK.
About the backup
battery
“VOL” appears in the display.
The seconds start incrementing from zero.
Make sure the clock is set correctly.
Press and hold CLOCK and SNOOZE/DATE/
SLEEP OFF simultaneously for at least
2 seconds to activate the Automatic DST
function.
3 Press ALARM TIME SET + or – to adjust
Notes
™
®
If you do not press any button for about
1 minute while setting the clock, the clock
setting will be canceled.
A calendar is installed in this unit. When the
date is set, the day of the week is automatically
displayed.
SUN = Sunday, MON = Monday,
TUE = Tuesday, WED = Wednesday,
THU = Thursday, FRI = Friday, SAT = Saturday
the volume.
Note
To keep accurate time, this unit contains a
CR2032 battery as a backup power source.
The battery keeps the clock and the alarm
operating in the event of a power interruption.
This unit has two connectors for a “WALKMAN”
and a Sony Ericsson Phone.
Audio connecting cable
(supplied)
Operating Instructions
Mode d’emploi (au dos)
If the Sony Ericsson Phone is listed in
4 Press ALARM TIME SET A or B.
Band (“FM” or “AM”) or “– –” flashes.
“– –” is the last station received.
“Compatible Sony Ericsson Phone models” ,
certain operations may not be performed by the
buttons on this unit. In this case, operate with the
buttons on the Sony Ericsson Phone.
Select the connector before using “WALKMAN” /
Sony Ericsson Phone according to the following
procedures.
Compatible Sony
To external
equipment
5 Press ALARM TIME SET + or – to select
Ericsson Phone models
Note for customers in
Canada
the desired band or “– –.”
Specifications
Time display
12-hour system
Compatible Sony Ericsson Phone models are as
follows.
2 Press AUDIO IN to display “AUDIO IN.”
3 Play the equipment connected to the
AUDIO IN jack.
Note
ICF-C8WM
If you select “– –,” jump to step 8.
3 Adjust the volume using VOLUME + or
A “WALKMAN” and Sony Ericsson Phone
cannot be used at the same time.
The clock is preset at the factory, and its memory
is powered by the preinstalled Sony CR2032
battery. If the “AM 12:00” appears on the display
when the unit is connected to AC outlet for the
first time, the battery may be weak. In this case,
consult a Sony dealer. The preinstalled CR2032
battery is considered part of the product, and is
covered by the warranty. You are required to show
“Note for customers in Canada” (in this
6 Press ALARM TIME SET A or B.
– (VOL + or – on the remote).
The preset number flashes.
Model(s)
Available
To display the year and date
“WALKMAN” / Sony Ericsson Phone
4
Adjust the volume using VOLUME + or –
(VOL + or – on the remote)
1 Pull the Docking Tray all the way out.
To
Press
7 Press ALARM TIME SET + or – to select
function(s)
Press SNOOZE/DATE/SLEEP OFF once for the
date, and press it again for the year.
section
“WALKMAN”:
DC out: 5V
MAX: 500mA
Sony Ericsson Phone:
DC out: 5V
MAX: 600mA
Radio section
.
Stop playback
Go to the next track
OFF
the desired preset number.
C510/C510a/C702/C702a/ Alarm/
“WALKMAN”connector
The setting is entered.
Dream Machine is a trademark of Sony Corporation.
Dream Machine est une marque de fabrique de Sony Corporation.
C902/C903
Music
(forward)
After a while, the display will change back to the
current time automatically.
To return to the radio
Sony Ericsson Phone
connector
8 If “A” or “B” does not appear in the
G700/G700Busir/G900
K530i/K550i/K550im/
K610i/K610im/K618i/
K770i/K790a/K800i/
K810i
playback/
Battery
charge
Go back to the previous
track
Press RADIO BAND.
(backward)
display, press ALARM TIME SET A or B
The frequency is shown in the display.
again.
Locate a point while
listening to the sound*
(forward) or
(backward)
while playing and
hold it until you
find the point.
To return to the “WALKMAN” / Sony
Ericsson Phone
Press (play).
instruction) to a Sony dealer in order to validate
the warranty for this product.
The radio will turn on at the set time.
Setting the brightness
of the display
Setting the buzzer alarm
The (play) and VOLUME + buttons have a tactile dot.
The “ ” mark in the display indicates that the “WALKMAN” or Sony Ericsson Phone function
is activated.
S500i
Note for customers in the
USA
Frequency range
1 Perform steps 1 to 8 in “To set the
alarm.”
No Power No Problem is a trademark of Sony Corporation.
No Power No Problem est une marque de fabrique de Sony Corporation.
T650i/T700/T707/TM506
V630i
Three levels of brightness are available by pressing
To stop listening
Press OFF/ALARM RESET (OFF on the remote),
and stop playback on the connected unit.
2 Press SELECT to select the
Band
FM
Frequency
Channel step
BRIGHTNESS/TIME ZONE.
“WALKMAN” or Sony Ericsson Phone
* This function may not be available on some
models. If the function does not work, press
(play) to cancel.
If “AM 12:00” flashes in the display when the unit
is connected to AC outlet for the first time, the
battery may be weak. In this case, consult your
Sony dealer.
2 Press ALARM TIME SET A or B to select
©2009 Sony Corporation
Printed in China
87.5 – 108 MHz 0.1 MHz
530 – 1 710 kHz 10 kHz
W508/W580i/W595/
W610i/W660i/W710i/
W760a/W760i/W850i/
W880i/W980/W995/
W995a
connector.
“BUZZER” alarm mode.
The indicator turns on to indicate the
“WALKMAN” or Sony Ericsson Phone
connector is activated.
Notes
AM
The setting is entered.
Refer also to the connected equipment’s manual.
The supplied audio connecting cable may not
be used with some external equipment. In this
case, use a cord suitable for the external
equipment you are using.
When you listen to the radio with external
equipment connected, turn off the connected
equipment to prevent noise. If noise occurs,
even when the equipment is turned off,
disconnect and place the external equipment
away from the unit.
Notes
General
Speaker
3 If “A” or “B” does not appear in the
The volume may be low when the volume of
Sony Ericsson Phone is set to low. In this case,
adjust the volume of Sony Ericsson Phone.
When removing the Sony Ericsson Phone, hold
the Docking Tray securely with one hand and
tilt the phone forward.
Knowing when to replace the
battery
display, press ALARM TIME SET A or B
Playing the radio
–Manual tuning
1 Press RADIO BAND to turn on the radio
and select the AM or FM band.
2 Press TUNING + or – (TUNE + or – on
the remote) to tune in to a desired
frequency.
Approx. 3.8 cm (1 1/2 inches) dia. 8 Ω
— Consult the dealer or an experienced radio/TV
technician for help.
again.
Input
Z610i/Z710i
The buzzer will sound at the set time.
When the battery becomes weak, “” appears in
the display.
AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output
0.8 W (at 10% harmonic distortion)
Power requirements
120 V AC, 60 Hz
For clock back up: 3V DC, CR2032 battery (1)
Note
WARNING
C901/C905
Music
The volume cannot be set for the buzzer alarm.
Replace the battery for the clock backup with a
If a power interruption occurs while the battery is
weak, the current time and alarm will be
initialized.
G502/G705/G705u
playback/
Sony CR2032 lithium battery, and the battery
for the remote commander with a Sony CR2025
lithium battery. Use of another battery may
present a risk of fire or explosion.
K310i/K320i/K510i/K630i/ Battery
K660i/K750i/K850i
M600i
P1i/P990i
V640i
To confirm an alarm time setting
Press ALARM TIME SET + or –. The setting will
be displayed for about 4 seconds.
charge
Replace the battery with a Sony CR2032 lithium
battery. Use of another battery may cause a fire or
explosion.
English
Battery may explode if mistreated. Do not
Dimensions
To change an alarm setting
3 Adjust the volume using VOLUME + or
recharge, disassemble or dispose of in fire.
Approx. 167 × 124.7 × 97.1 mm (w/h/d)
Press and hold ALARM TIME SET + for at least
2 seconds to move the alarm time forwards. Press
and hold ALARM TIME SET – for at least
2 seconds to move the alarm time back.
W200i/W300i/W700i/
W705/W810i/W890i/
W902/W910i/W950i/
W960i
Z530i/Z550a/Z550i/Z558i
Z750i/Z770i
Replacing the battery
Troubleshooting
Owner’s Record
(U.S. only)
Dispose of used battery promptly. Keep away
– (VOL + or – on the remote).
(6 5/8 × 4 15 16 × 3 7/8 inches) including projecting
/
from children.
parts and controls
Mass
1 Keep the AC plug connected to the AC
outlet, remove the screw that secures the
battery holder at the bottom of the unit
using a screwdriver, and remove the
battery holder (see Fig.).
Replace a new battery in the battery holder
with the side facing up (see Fig.)
3 Insert the battery holder back into the
unit and secure it with the screw
(see Fig.).
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
Tuning in to a station
The unit automatically scans AM or FM stations.
Note
e model number and the serial number are located on the
bottom.
Important Safety
Instructions
The Sony Ericsson Phone connector is selected by
the default setting.
Approx. 988 g (2 lb 2.9 oz) including power
supply unit
Supplied accessories
Remote commander (1)
AM loop antenna (1)
Audio connecting cable (1)
Attachment for “WALKMAN” (2)
To use the unit as a battery
charger
When you release the button, the changed time
will be displayed for about 2 seconds. To change
the alarm time again, press ALARM TIME SET +
or – within these 2 seconds, otherwise the setting
change will be fixed as displayed.
Record the serial number in the space provided below. Refer
to them whenever you call upon your Sony dealer regarding
this product.
1 Press RADIO BAND to turn on the radio
to select the AM or FM band.
The clock flashes “AM 12:00” due to a power
interruption.
1) Read these instructions.
You can use the unit as a battery charger.
Charging begins when the “WALKMAN” or Sony
Ericsson Phone is connected to the unit.
Charging status appears in the “WALKMAN” or
Sony Ericsson Phone display. For details, see the
user’s guide of your “WALKMAN” or Sony
Ericsson Phone.
F305
Battery
charge
To Play a “WALKMAN”
2) Keep these instructions.
The battery is low. Replace the battery. Remove
the old battery and install a new one.
Model No. ICF-C8WM
J110i/J120i
2 Press and hold TUNING + or – (TUNE +
3) Heed all warnings.
2
1 Choose the “WALKMAN” attachment
K200i/K330
4) Follow all instructions.
Serial No.________________________________
or – on the remote).
.
that fits your “WALKMAN” (see
To doze for a few more minutes
Press SNOOZE/DATE/SLEEP OFF.
The sound turns off but will automatically come
on again after about 10 minutes.
You can change the snooze time by pressing
SNOOZE/DATE/SLEEP OFF repeatedly within
4 seconds.
The maximum length of the snooze time is
60 minutes.
To stop the snooze timer, press OFF/ALARM
RESET (OFF on the remote).
R300
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
The radio, “WALKMAN” / Sony Ericsson
Phone or buzzer alarm does not sound at the
preset alarm time.
+: scans upward through the frequency bands.
–: scans downwards through the frequency
bands.
“Compatible “WALKMAN” models”).
2 Insert the tab on the left side of the
attachment () into the left slot in the
“WALKMAN” connector, and then press
down into the unit ().
S302/S312
Design and specifications are subject to change
without notice.
For customers who purchased this product in the
USA
T250i/T280i/T303
W302/W350i/W380i/W395
Z310a/Z310i/Z555i
Check that alarm “A” or alarm “B” is properly
displayed.
Please register this product on line at
Proper registration will enable us to send you
periodic mailings about new products, services,
and other important announcements. Registering
your product will also allow us to contact you
in the unlikely event that the product needs
adjustment or modification. ank you.
Scanning starts from the currently-tuned
frequency. When a station is received,
scanning stops.
Note
4 Press (play), RADIO BAND, AUDIO IN
or SNOOZE/DATE/SLEEP OFF to turn
“” off in the display.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments/accessories specified by
the manufacturer.
A “WALKMAN” and Sony Ericsson Phone
cannot be charged at the same time. Only the
selected device (connector indicator on) can be
charged.
The radio or “WALKMAN” / Sony Ericsson
Phone alarm is activated but no sound comes
on at the preset alarm time.
3 Adjust the volume using VOLUME +
or – (VOL + or – on the remote).
Setting the clock for
the first time
Note
Check the alarm volume setting.
When you replace the battery, do not disconnect
the plug from the AC outlet. Otherwise, the
calendar, current time, alarm and station presets
will be initialized.
–Preset tuning
There is no sound from the “WALKMAN” /
Sony Ericsson Phone.
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or
moisture.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with newspapers,
tablecloths, curtains, etc. And do not place lighted
candles on the apparatus.
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
This unit is preset to the current EST (Eastern
Standard Time) at the factory, and is powered by a
backup battery. All you need to do the first time is
just plug it in and select your time zone.
You can preset 20 stations for FM and 10 stations
for AM.
To stop the alarm
Setting the alarm
Make sure the “WALKMAN” or Sony Ericsson
Press OFF/ALARM RESET (OFF on the remote)
to turn off the alarm.
This clock radio is equipped with 3 alarm
modes—“WALKMAN” / Sony Ericsson Phone,
radio and buzzer. Before setting the alarm, make
sure to set the clock (see “Setting the clock for the
first time”).
Phone is securely connected.
Presetting a station
Select music library on your “WALKMAN” /
Sony Ericsson Phone.
The alarm will sound again at the same time the
next day.
3 Set your “WALKMAN” on the unit.
1 Follow steps 1 and 2 in “Manual tuning”
to tune the frequency you wish to preset.
2 Press and hold DISPLAY/MEMORY for
at least 2 seconds.
1 Plug in the unit.
The current EST (Eastern Standard Time)
appears in the display.
There is no sound from the Sony Ericsson
Phone.
To deactivate the alarm
Press ALARM TIME SET A or B to turn off the
alarm A or B indicator from the display.
Note
2 Press and hold BRIGHTNESS/TIME
Make sure the Sony Ericsson Phone is listed in
“Compatible Sony Ericsson Phone models”
or .
Power on the Sony Ericsson Phone.
Adjust the volume of the Sony Ericsson Phone.
Set Bluetooth function to off on the Sony
Ericsson Phone.
Alarm function is available only for the models
listed in “Compatible Sony Ericsson Phone
models” .
ZONE for at least 2 seconds.
3 Press PRESET + or – to select the preset
To activate the alarm
Press ALARM TIME SET A or B to turn on the
alarm A or B indicator in the display.
Area number “2” flashes in the display.
number, then press DISPLAY/MEMORY.
The frequency is stored with the selected
preset number.
The and VOL + buttons have a tactile dot.
3 Press ALARM TIME SET + or –
repeatedly to select the number as
follows:
To set the alarm
12)Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
Notes
1 Press and hold ALARM TIME SET A or
If the same alarm time is set for both alarm A
and B, alarm A takes priority.
Example: The following display appears
when you preset FM 105.8 MHz to preset
number 1 for FM.
B for at least 2 seconds.
“WAKE UP” appears and the hour flashes in
the display.
Reset button
CR2032
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
Area number Time zone
NOTES ON LITHIUM BATTERY
3 Connect the cords to the AM antenna
If there is no operation while the alarm is
occurring, the alarm will stop after about
60 minutes.
The connector indicator blinks for a few
seconds and then stays lit.
Wipe the battery with a dry cloth to assure a
good contact.
1
Atlantic standard Time
Eastern standard Time
terminals.
Cord (A) or cord (B) can be connected to
either terminal.
Insert the cord while
pushing down the
terminal clamp.
2 Press ALARM TIME SET + or –
2
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
Notes
repeatedly until the desired hour
Note on the alarm in the event of a power
interruption
In the event of a power interruption, the alarm
will work until the battery is totally discharged.
However, certain functions will be affected as
follows:
(default setting)
The unit cannot operate while the connector
appears.
indicator is blinking.
3
4
5
6
7
Central standard Time
Mountain standard Time
Pacific standard Time
Yukon standard Time
Hawaiian standard Time
This warranty is valid only in the United States.
Cette garantie n’est valide qu’aux États-Unis.
To cycle the hour rapidly, press and hold
ALARM TIME SET + or –.
If the indicator does not stay lit, remove the
“WALKMAN” and set again.
When removing the “WALKMAN,” hold the
Docking Tray securely with one hand.
13)Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
For the state of california, USA only
Perchlorate Material –special handling may apply, See
Perchlorate Material: Lithium battery contains
perchlorate
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
3 Press ALARM TIME SET A or B.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
The minute flashes.
Only insert up
The backlight will not light up.
to here.
4 Repeat step 2 to set the minute.
B
If the alarm mode is set to “WALKMAN” /
Sony Ericsson Phone or radio, it will change to
buzzer automatically.
4 Press (play).
A
Features
5 Press ALARM TIME SET A or B.
“
” appears in the display.
4 Press BRIGHTNESS/TIME ZONE to set.
The days of the week flash.
The “WALKMAN” begins to play
automatically. You can operate the connected
“WALKMAN” by this unit or the
“WALKMAN” buttons.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Clock Radio with “WALKMAN” / Sony
Ericsson Phone compatible
Wake or Sleep to “WALKMAN” / Sony Ericsson
Phone / Radio
If a power interruption occurs while the alarm
is sounding, the alarm will stop.
If OFF/ALARM RESET is not pressed, the alarm
will sound for about 5 minutes.
If “” appears in the display, the alarm will not
sound in the event of a power interruption.
Replace the battery if “” appears.
The snooze function will not work.
During a power interruption, each alarm will
sound at the set time only once.
Note
6 Repeat step 2 to set the days of the week.
You can select the days from the following
three options:
Though the clock is correctly set at the factory,
discrepancies may arise during transport or
storage. If necessary, set the clock to the correct
time by referring to “Setting the clock manually.”
The display shows the frequency for about
10 seconds, and then returns to the current
time.
4 Make sure the AM loop antenna is
Every day: SUN MON TUE WED THU FRI
SAT
Week day: MON TUE WED THU FRI
Week end: SUN SAT
Easy to set A-B alarm
5 Adjust the volume using VOLUME + or
CAUTION
Danger of explosion if battery is incorrectly
replaced. Replace only with the same type.
2-5-7 day alarm
connected firmly by pulling softly.
– (VOL + or – on the remote).
LCD Brightness control
To preset another station, repeat these steps.
When Daylight Saving Time
(summer time) begins
Wireless Remote commander
To
Press
Adjusting the AM loop antenna
Find a place and an orientation that provide good
reception.
Do not place the AM loop antenna near the
unit or other AV equipment, as noise may
result.
Note
7 Press ALARM TIME SET A or B.
Stop playback
Go to the next track
OFF
If you try to store another station with the same
preset number, the previously stored station will
be replaced.
If the time in the display is
incorrect after the battery is
changed (Reset)
The alarm mode setting is entered.
This model automatically adjusts for Daylight
Saving Time (summer time).
(forward)
8 Press ALARM TIME SET + or –
repeatedly until the desired alarm mode
flashes.
Connecting the
antenna
Precautions
Go back to the previous
track
“
” is displayed from the beginning of Daylight
(backward)
Play the unit on the power source specified in
Saving Time (summer time) and disappears at the
end of Daylight Saving Time (summer time)
automatically.
is symbol is intended to alert the user
to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
Tuning in to a preset station
1 Press RADIO BAND to turn on the radio
and select the AM or FM band.
2 Press PRESET + or – to select the desired
preset number.
Press the reset button with a pointed instrument.
The reset button is in the small hole located near
the battery holder.
Setting the sleep timer
“Specifications.”
Locate a point while
listening to the sound
(forward) or
(backward)
while playing and
hold it until you
find the point.
Tip
You can choose one of 3 settings: “
,”
To disconnect the AC power cord (mains lead),
pull it out by the plug, not the cord.
To connect the AM loop
antenna
You can fall asleep to music, etc., using the built-
in sleep timer that turns off the unit automatically
after a preset duration.
Adjust the direction of the AM loop antenna for
best AM broadcast sound.
“RADIO” or “BUZZER.” Set the alarm mode
as follows:
Daylight Saving Time (summer time) begins at:
2:00 AM on the second Sunday of March.
Standard time begins at: 2:00 AM on the first
Sunday of November.
Since a strong magnet is used for the speaker,
keep personal credit cards using magnetic coding
or spring-wound watches away from the unit to
prevent possible damage from the magnet.
Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
– “
”: see “ Setting the “WALKMAN” /
is symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
The shape and the length of the antenna is
designed to receive AM signals. Do not dismantle
or roll up the antenna.
Sony Ericsson Phone alarm.”
1 Press SLEEP while the unit is turned on.
“SLEEP” appears and the sleep time flashes in
the display.
Compatible
– RADIO: see “ Setting the radio alarm.”
– BUZZER: see “ Setting the buzzer alarm.”
Tip
3 Adjust the volume using VOLUME + or
Preparing the remote
commander
To cancel Automatic DST/Summer Time
adjustment during the Daylight Saving
Time (summer time) period
The Automatic DST/Summer Time adjustment
can be canceled.
Press and hold CLOCK and SNOOZE/DATE/
SLEEP OFF at the same time at least 2 seconds
while the clock is displayed.
“WALKMAN” models
To remove the “WALKMAN” attachment, press
firmly down on the area marked (ooo) (), and
remove (), as shown in the illustration.
– (VOL + or – on the remote).
1 Remove only the loop part from the
plastic stand.
2 Set up the AM loop antenna.
2 Press SLEEP to set the sleep timer
Setting the “WALKMAN” / Sony
Use the Oval attachment (supplied with your
“WALKMAN”) when you connect it to this unit.
If the Oval attachment is not supplied with your
“WALKMAN,” use one of the attachments
supplied with this unit. “WALKMAN” models
compatible with this unit are as follows.
NOTE
Before using the card remote commander for the
first time, remove the insulation film.
–Auto preset tuning
Ericsson Phone alarm
duration.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
Each time you press SLEEP, the duration (in
minutes) changes as follows:
Allow adequate air circulation to prevent
internal heat build-up. Do not place the unit on
a surface (a rug, a blanket, etc.) or near
materials (a curtain) which might block the
ventilation holes.
Should any solid object or liquid fall into the unit,
unplug the unit and have it checked by qualified
personnel before operating it any further.
To clean the casing, use a soft cloth dampened
with a mild detergent solution.
Never touch the wire of the external FM
antenna during a thunderstorm. Furthermore,
immediately disconnect the AC power cord
from the radio.
1 Press RADIO BAND to turn on the radio
1 Perform steps 1 to 8 in “To set the
alarm.”
2 Press SELECT on the Docking Tray to
select the “WALKMAN” or Sony
Ericsson Phone connector.
and select the AM or FM band.
90
60
30
15
2 Press and hold RADIO BAND until “AP”
appears in the display.
3 Press DISPLAY/MEMORY.
The unit automatically presets the available
channels in order.
OFF
Models using the Oval attachment
“
” and “OFF” appear in the display to show that
The display returns to clock mode for about
4 seconds after you have finished the duration
setting and released SLEEP, and then the sleep
timer starts.
The unit will play for the duration you set, and
then shut off.
(supplied with your “WALKMAN”)
NWZ-E440 series: NWZ-E443/E444/E445/
E443K/E444K
NWZ-S540 series: NWZ-S544/S545
Models using the Type A attachment
Automatic DST/Summer Time adjustment has
been canceled. The display returns to the clock.
When to replace the battery
3 Press ALARM TIME SET A or B to select
With normal use, the battery (CR2025) should
last for about six months. When the remote
commander no longer operates the unit, replace
the battery with a new one.
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
Notes
“
” alarm mode.
Changes to Automatic DST/Summer Time
adjustment by the unit (see above) are subject
to circumstances and laws in each country/
region. Should this interfere with desired
adjustment, cancel the Automatic DST/Summer
Time adjustment and set the DST display
manually as necessary. Customers living in a
country/region that does not use Daylight
Saving Time (summer time) must cancel
Automatic DST/Summer Time adjustment
before using the unit.
“VOL” flashes in the display.
4 Press ALARM TIME SET + or – to adjust
the volume.
Improving the reception
(supplied with this unit)
To turn off the unit before the preset
NWZ-E430 series: NWZ-E435F/E436F/E438F
NWZ-S630 series: NWZ-S636F/S638F/S639F/
S636FK
FM:
5 Press ALARM TIME SET A or B.
time
Extend the FM wire antenna fully to increase
The setting is entered.
Press SNOOZE/DATE/SLEEP OFF or OFF/
ALARM RESET (OFF on the remote).
reception sensitivity.
NWZ-S730 series: NWZ-S736F/S738F/S739F
NWZ-A720 series: NWZ-A726/A726B/A728/
A728B/A729
AM:
of the following measures:
Connect the supplied AM loop antenna to the
unit. Rotate the antenna horizontally for
optimum reception.
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
NW-A800 series: NW-A808/A806/A805
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
|