SMO-F551 / RMO-S551
Magneto-Optical
Disk Drive
Installation Guide
1.3
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on DOS and Windows3.1
Requirements:
1. SCSI host adapter
SCSI host adapter controls the command and data transfer between MO drive and host
computer. (Ex. AHA-2940, AHA-3940 of Adaptec)
2. Device driver
Device driver controls MO drive. Device driver is almost supplied with SCSI host
TM
adapter. If you use RMO-S551, we recommend to use the “Formatter One Pro
bundled with RMO-S551.
”
3. SCSI cable
SCSI cable is used for connecting host adapter and MO drive. Please select proper
SCSI cable.
4. Format utility software
Format utility software is used to format the media and make partitions. Format utility
software is often supplied with SCSI host adapter. (e.g. ASPI manager and ASPI driver
for AHA-29xx are provided from Adaptec) But if you use RMO-S551, we recommend to
use the “Formatter One Pro TM” bundled with RMO-S551.
Installation:
1) Connection
- Set the SCSI host adapter into the host computer.
- Attach the MO drive to the SCSI host adapter using proper SCSI cable.
- Set proper SCSI ID and termination on the MO drive.
2) Install the device driver
- Turn on the MO drive and host computer.
- Install the device driver on DOS level or on Windows3.1 and reboot host computer.
3) Format the media and partition
- Format and Label the media using a format utility tool, such as “Formatter One Pro TM”.
3
SMO-F551 / RMO-S551 Installation Guide
Note:
- DOS and Window3.1 limit one partition size to 2.1GB. Please make a partition under
2.1GB per partition.
- “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some
device driver does not support 4.8GB or 5.2GB media. Please confirm the proper media
before using the device driver. If you have any questions, please contact your dealer of
the device driver.
- DOS and Windows3.1 do not support WORM media.
- Before rebooting a host PC, please don’t replace other media of a different sector size.
4
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on Windows95/98
Requirement:
1. SCSI host adapter
SCSI host adapter controls the command and data transfer between MO drive and host
computer. (Ex. AHA-2940, AHA-3940 of Adaptec) Most of SCSI host adapters are
supported by Windows95/98.
2. Device driver
Device driver controls MO drive. Windows95/98 encloses the device driver on
installation CD-ROM or floppy disk. If you use RMO-S551, we recommend to use the
“Formatter One Pro TM” bundled with RMO-S551.
3. SCSI cable
SCSI cable is used for connecting host adapter and MO drive. Please select proper
SCSI cable.
4. Format utility software
Format utility software is used to format the media and make partitions. Format utility
software is often supplied with SCSI host adapter. If you use RMO-S551, we
recommend to use the “Formatter One Pro TM” bundled with RMO-S551.
Installation:
1) Connection
- Set the SCSI host adapter into the host computer.
- Attach the MO drive using proper SCSI cable.
- Set proper SCSI ID and termination on the MO drive.
2) No device driver
2)-1 Preparation
- Turn on the drive and insert the media.
- Turn on the power of the host system and boot Windows95/98.
2)-2 To detect the connected hardware
- Click the Start button, point to Setting, a system and boot Windows95/98.
- Click Add New Hardware icon.
- Follow the instructions on display
2)-3 Format and Label the media
- Double-click My Computer icon to view various drive icons.
- Highlight the Removable drive icon
- Point on File, and click Format option to initialize and label media.
5
SMO-F551 / RMO-S551 Installation Guide
3) Install the device driver
3)-1 Preparation
- Turn on the MO drive and host computer.
- Install the device driver on Windows95/98 and reboot the host computer. (Please refer
to the user’s guide of the Device Driver)
3)-2 Format the media and partition
- Format and Label the media using format utility software, such as “Formatter One Pro
TM”.
Note:
- Windows95/98 limits one partition size to 2.1GB, please make a partition under 2.1GB
per partition.
- Don’t use floppy format for 4.8GB and 5.2GB Media, because the partition size is over
2.1GB.
- “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some
device driver or native Windows95/98 system do not support 4.8GB or 5.2GB media.
Please confirm the proper media before using the device driver. If you have any
question, please contact your dealer of the device driver.
- Windows95/98 does not support WORM media.
- Before rebooting a host PC, please don’t replace other media of a different sector size.
6
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on WindowsNT
Requirement:
1. SCSI host adapter
SCSI host adapter controls the command and data transfer between MO drive and host
computer. (Ex. AHA-2940, AHA-3940)
2. Device driver
Device driver controls MO drive. WindowsNT include the Device Driver. If you use
RMO-S551, we recommend to use the “Formatter One Pro TM” is supplied with RMO-
S551.
3. SCSI cable
SCSI cable is used for connecting host adapter and MO drive. Please select proper
SCSI cable.
4. Format Utility software
Format utility software is used to format media and make partitions. Format utility is
often supplied with SCSI host adapter. If you use RMO-S551, we recommend to use the
“Formatter One Pro TM” bundled with RMO-S551.
Installation:
1) Connection
- Set the SCSI host adapter into the host computer.
- Attach the MO drive using proper SCSI cable.
- Set proper SCSI ID and termination on the MO drive.
2) No device driver
2)-1 Preparation
- Turn on the drive and insert the media.
- Turn on the power of the host system and boot WindowsNT.
- Let it Autoconfigure the hardware.
2)-2 Format the media and partition
a) Click the Start button and point to Program “Administrative Tools”.
Click on Disk Administrator
- Verify to write signature to the media.
- Highlight the drive icon to be partitioned.
- Click on File, then Create Partition
- Choose partition parameters and click OK.
- Close Disk Administrator....save changes when asked.
7
SMO-F551 / RMO-S551 Installation Guide
b) Click on Disk Administrator again
- Highlight the partitioned drive icon.
- Click on Tools, then Format.
Choose format type (see Notes) and volume label name.
- Format the media.
- Close Disk Administrator.
3) Install the device driver
3)-1 Preparation
- Login WindowsNT
- Install the device driver on WindowsNT and reboot the host computer. (Please refer to
the user’s guide of the Device Driver)
3)-2 Format the media and partition
- Format and Label the media using format utility software, such as “Formatter One Pro
TM”.
Note:
- There are two format types that Disk Administrator supports.
1) FAT: allows media to be removed easily.
2) NTFS: ‘locks’ the media into the drive.
- “Formatter One Pro TM” support only FAT16 file system. If you would like to use NTFS
file system, please use disk administrator after logining as administrator.
- “Formatter One Pro TM” supports all kind of MO media (4.1GB, 4.8GB, 5.2GB), but some
device driver or native WindowsNT system do not support 4.8GB or 5.2GB media.
Please confirm the proper media before using the device driver. If you have any
question, please contact your dealer of the device driver.
- When you format 4.8GB or 5.2GB media using disk administrator, please select NTFS
file system.
- WindowsNT does not support WORM media.
- Before rebooting a host PC, please don’t replace other media of a different sector size.
8
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on SUN System
Test equipment:
The following procedure was confirmed with the following system and drive combination:
Host:
OS:
Target:
SUN Ultra Enterprise 450
Solaris 2.3, Solaris 2.4, Solaris 2.5.1, Solaris 2.6
RMO-S551
- device type is set to 0
- 512 byte/sector media is used.
Since the SCSI driver “sd” which comes with the SUN’s UNIX system is for device type 0
(hard disk drive, in general), the cases with device type 7 or 1024 bytes/sector media are
not supported.
Installation:
1) Connection
- Set the SCSI host adapter into the host computer using proper SCSI cable.
- Set proper SCSI ID on the MO drive.
- Set proper termination.
- Set the Device Type 0.
2) Login
- Turn on the MO drive and the host computer.
- Login as root or be a super user with “su” command.
3) Format and partition
To make a disk accessible, perform the following three command:
- ‘format’: using to format media.
- ‘newfs’: using to make file system.
- ‘mount’: using to mount media.
Create a ‘format.dat’ file prior to issuing the ‘format’ command
4) Edit “format.dat” file
- add following configuration to the “format.dat”.
#
# This is a list of sample Sony 5.25 inch MO disk configurations.
#
disk_type = "ISO 4X MO disk, 1150MB" ¥
: ctlr = SCSI : fmt_time = 2 ¥
: ncyl = 2261 : acyl = 2 : pcyl = 2263 : nhead = 32 : nsect = 31¥
: rpm = 3600 : bpt = 15872
disk_type = "ISO 8X MO disk, 2035MB" ¥
9
SMO-F551 / RMO-S551 Installation Guide
: ctlr = SCSI : fmt_time = 2 ¥
: ncyl = 4003 : acyl = 2 : pcyl = 4005 : nhead = 32 : nsect = 31 ¥
: rpm = 3300 : bpt = 15872
#
# This is a list of sample partition tables for Sony 5.25 inch MO disk.
#
partition = "ISO 4X MO disk, 1150MB" ¥
: disk = "ISO 4X MO disk, 1150MB" : ctlr = SCSI ¥
: 0 = 0 , 0 : 1 = 0, 0 : 2 = 0, 2242912 :
partition = "ISO 8X MO disk, 2035MB" ¥
: disk = "ISO 8X MO disk, 2035MB" : ctlr = SCSI ¥
: 0 = 0 , 0 : 1 = 0, 0 : 2 = 0, 3970976 :
Note:
- SUN System supports only 512 byte/sector MO media, you can use 2.3GB and 4.1GB
media. If you would like to use 1024 byte/sector or 2048 byte/sector media, please use
a proper device driver software for SUN system.
10
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on Silicon Graphics Systems
Test equipment:
The following procedure was confirmed with the following system and drive combination:
Host:
OS:
SGI O2 R5000, R10000
IRIX6.3
Target:
RMO-S551
Installation:
1) Connection
- Attach the drive to the host using a proper SCSI cable.
- Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4)
- Set proper termination.
Note: The SCSI ID number should be unique for each SCSI devices. The “hinv” command in the
maintenance mode of the SGI workstation is useful to determine SCSI ID numbers.
2) Login
- Turn on the MO drive and host computer.
- Log in as root.
- Confirm the connection of MO drive and UNIX Workstation using following command.
Port2# #hinv –c scsi
Optical disk : unit 4 on SCSI controller 1
3) Media Initialization
- Launch the Unix Shell and insert a cartridge into the drive
- Enter “fx-x” at the Unix Shell prompt
Format the media using following commands.
port0 3# fx -x [enter]
fx version 6.3, July xx, 1998
fx: “device name“ = (dksc) [enter]
fx: ctlr# = (0) 1 [enter]
fx: drive# = (1) 4 [enter]
. . . opening dksc(1,4)
. . . controller test. . . OK
.
.
11
SMO-F551 / RMO-S551 Installation Guide
.
.
----- please choose one (? for help, .. to quit this menu)-----
[exi]t
[d]ebug/
[l]abel/
[a]uto
[b]adblock/
fx> f
[exe]rcise/
[r]epartition/
[f]ormat
fx/format: drive parameter to usr in formatting = (current) [enter]
*********WARNING*********
about to destroy data on disk dksc(1,4)! Ok? Yes [enter]
.
.
4) Repartition the media
Repartition the media from “root drive” to “option drive” using following commands.
----- please choose one (? for help, .. to quit this menu)-----
[exi]t
[d]ebug/
[l]abel/
[a]uto
[b]adblock/
fx> r [enter]
[exe]rcise/
[r]epartition/
[f]ormat
----- partitions-----
part type
0: xfs
cyls
blocks
3072 + 3708416
3711488 + 262144
0 + 3072
Megabytes (base+size)
1 + 1811
1812 + 128
0 + 1
6 + 7243
7249 + 512
0 + 6
1: raw
8: volhdr
10: volume
0 + 7761
0 + 3973632
0 + 1940
capacity is 3973952 blocks
----- please choose one (? for help, .. to quit this menu)-----
[ro]otdrive
[u]srrootdrive
[o]ptiondrive
[re]size
[e]xpert
fx/repartition> o [enter]
fx/repartition/optiondrive: type of data partition = (xfs) [enter]
fx/repartition/optiondrive: create usr log partition? = (yes) [enter]
Warning: You will need to re-install all software and restore user data from backups after
changing the partition layout.
Changing partitions will cause all data on the drive to be lost.
Be sure you have the drive backed up if it contains any user data.
Continue? Yes [enter]
Can't get drive geometry, assuming 64 sectors/track
Can't get drive geometry, assuming 8 heads
Unable to get device geometry, assuming default
12
SMO-F551 / RMO-S551 Installation Guide
----- partitions-----
part type
7: xfs
cyls
6 + 7738
0 + 6
blocks
3072 + 3961856
0 + 3072
Megabytes (base+size)
1 + 1934
0 + 1
8: volhd
10: volume
15:xfslog
0 + 7761
7744+17
0 + 3973632
3964928 + 8704
0 + 1940
1936 + 4
capacity is 3973952 blocks
----- please choose one (? for help, .. to quit this menu)-----
[ro]otdrive
[u]srrootdrive
fx/repartition> ..
[o]ptiondrive
[re]size
[e]xpert
5) Confirm the partition
Confirm the partition using following commands.
----- please choose one (? for help, .. to quit this menu)-----
[exi]t
[d]ebug/
[l]abel/
[a]uto
[b]adblock/
fx> l [enter]
[exe]rcise/
[r]epartition/
[f]ormat
----- please choose one (? for help, .. to quit this menu)-----
[sh]ow/ [sy]nc [se]t/ [c]reate/
fx/label> sh [enter]
----- please choose one (? for help, .. to quit this menu)-----
[para]meters
[g]eometry
[part]itions
[s]giinfo
[b]ootinfo
[d]irectory
[a]ll
fx/label/show> para [enter]
----- please choose one (? for help, .. to quit this menu)-----
[para]meters
[g]eometry
[part]itions
[s]giinfo
[b]ootinfo
[d]irectory
[a]ll
fx/label/show> part [enter]
----- partitions-----
part type
7: xfs
cyls
6 + 7738
0 + 6
blocks
3072 + 3961856
0 + 3072
Megabytes (base+size)
1 + 1934
0 + 1
8: volhd
10: volume
15:xfslog
0 + 7761
7744+17
0 + 3973632
3964928 + 8704
0 + 1940
1936 + 4
13
SMO-F551 / RMO-S551 Installation Guide
---- please choose one (? for help, .. to quit this menu)-----
[para]meters
[g]eometry
[part]itions
[s]giinfo
[b]ootinfo
[d]irectory
[a]ll
fx/label/show> .. [enter]
----- please choose one (? for help, .. to quit this menu)-----
[sh]ow/
[sy]nc
[se]t/
[c]reate/
fx/label> .. [enter]
----- please choose one (? for help, .. to quit this menu)-----
[exi]t
[d]ebug/
[l]abel/
[a]uto
[b]adblock/
fx> exit [enter]
[exe]rcise/
[r]epartition/
[f]ormat
6) Make a file system
Make a file system using following command.
port0 7# mkfs /dev/rdsk/dks1d4s7 [enter]
meta-data=/dev/rdsk/dks1d4s7
isize=256
agcount=8, agsize=61904 blks
blocks=495232, imaxpct=25
blocks=1000
data
log
=
bsize=4096
bsize=4096
extsz=65536
=internal log
realtime =none
blocks=0, rtextents=0
7) Mount the media
Mount the media and confirm the result.
( # mkdir /mo [enter] ! creat mount point)
port0 8# mount /dev/dsk/dks1d4s7 /mo [enter]
port0 9# df /mo [enter]
File system
/dev/dsk/dks1d4s0
Type
xfs
blocks
use avail
%use
1
Mounted on
/mo
3700416 288 3700128
Note:
As O2 supports only 512 Byte/sector MO media, you can use 2.3GB and 4.1GB MO
media.
14
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on HP Systems
Test equipment:
The following procedure was confirmed with the following system and drive combination:
UNIX Workstation:
OS:
Target:
HP9000/712
HP-UX A.09.07
RMO-S551
Installation:
1) Connection
- Connect MO drive and UNIX Workstation using proper SCSI cable.
- Set proper SCSI ID on the MO drive. (In this case, SCSI ID = 4)
- Set proper termination.
Note: The ‘ioscan’ command is useful to scan SCSI bus.
# ioscan -fc disk [enter]
2) Login
- Turn on the MO drive and the host computer, and insert a cartridge into the drive.
- Login as root.
- Confirm the connection of MO drive and UNIX Workstation using following command.
# diskinfo –v /dev /rdisk/c201d4s0 [Enter]
SCSI describe of /dev/rdsk/c201d4s0 *[4.1GB(4.8GB, 5.2GB)]
Vendor
product id
type
: SONY
: SMO-F551
: optical memory
size
: 1986976 Kbytes (2319786, 2526944)
bytes per sector : 512(1024, 2048)
rev level : 1.08
blocks per disk : 3973952 (2319786, 1263472)
ISO version
ECMA version
ANSI version
: 0
: 0
: 2
removable media : yes
response format : 2
If the workstation return an error “diskinfo : can’t open /dev/rdsk/c201d1s0”, MO
drive is not connected with UNIX workstation correctly. You should shut down the
system and check the SCSI cable and SCSI terminator.
15
SMO-F551 / RMO-S551 Installation Guide
3) Edit “disktab” file
- Edit or add /etc/disktab file as following.
###############################################
# Sony Magneto-Optical Media
###############################################
SONY_MO_8X_2048:¥
:No swap or boot:ns#39:nt#16:nc#3997:¥
:s0#2494170:b0#8192:f0#2048:¥
:se#2048:rm#3300:
SONY_MO_8X_1024:¥
:No swap or boot:ns#39:nt#16:nc#3671:¥
:s0#2290750:b0#8192:f0#1024:¥
:se#1024:rm#3300:
SONY_MO_8X_512:¥
:No swap or boot:ns#39:nt#16:nc#3131:¥
:s0#1954200:b0#8192:f0#1024:¥
:se#512:rm#3300:
4) Format Media
- Format the media using following command. You must execute this command only
one time when you use the media first time.
# mediainit –v /dev/rdsk/c201d0s0 [Enter]
It takes about 45 minutes.
5) Create a file system
- Create a file system using following command.
# newfs /dev/rdsk/c201d1s0
[Enter]
Media_type
Media type : Please input proper sentence (refer disktab, ex SONY_MO_8X_512)
6) Mount the media
- Mount the media using following commands.
# mkdir /mo [Enter]
# mount /dev/dsk/c201d1s0 /mo [Enter]
16
SMO-F551 / RMO-S551 Installation Guide
7) Confirm the result of mount command
- Confirm the result of mount command using following command.
# bdf /mo [Enter]
(ex.4.1GB)
Filesystem
/dev/dsk/c201d4s0
kbytes
1900868
used
9
avail
1710772
capacity
0%
Mounted on
/mo
(ex.4.8GB)
Filesystem
/dev/dsk/c201d4s0
kbytes
2228170
used
9
avail
2005344
capacity
0%
Mounted on
/mo
(ex.5.2GB)
Filesystem
/dev/dsk/c201d4s0
kbytes
2426150
used
10
avail
2183524
capacity
0%
Mounted on
/mo
Note:
- You can not use GUI tool to format and mount the media. Please use shell commands.
Appendix: Edit or add /etc/disktab file for 4XMO disk
###############################################
# Sony Magneto-Optical Media
###############################################
SONY_MO_4X_1024:¥
:No swap or boot:ns#39:nt#16:nc#1988:¥
:s0#1240240:b0#8192:f0#1024:¥
:se#1024:rm#3600:
SONY_MO_4X_512:¥
:No swap or boot:ns#39:nt#16:nc#1773:¥
:s0#1106088:b0#8192:f0#1024:¥
:se#512:rm#3600:
17
SMO-F551 / RMO-S551 Installation Guide
Installation Procedure on SantaCruzOperation Systems
Test equipment:
The following procedure was confirmed with the following system and drive combination:
Host:
OS:
Target:
PC-UNIX_SCO
UnixWare 2.1, UnixWare 7
RMO-S551
Installation:
1) Hardware Installation
- Attach the drive to the system using a SCSI cable.
- Set proper SCSI ID and termination.
- Set proper Functional Switch.
Note: Device type; Direct Memory Access Device Placing a jumper socket over
the desired pair of pins A10/B10 turn "Direct Memory Access Device" function ON.
(Please refer to Page 17-20 of Technical Guide for SMO-F551.)
- Turn on the drive and insert the media.
2) Turn on the power of the host system
3) To use "diskadd" command to mount the disk on the system
Note: The "diskadd" command is the type of conversation command. So it
asks you some questions of to need the information under operation. Please
refer to the online manual of UNIX_SCO on detail.
4) To unmount disk on the system
Note: It needs to operate the "unmount " before the eject of MO media.
18
SMO-F551 / RMO-S551 Installation Guide
Appendix
OS
DOS
O
O*1
O*1
Window3.1
Windows95/98
WindowsNT
4.1GB media
4.8GB media
5.2GB media
O
O*1
O*1
O
O*1
O*1
O
O*1
O*1
Table 1. Media support table-1
*1: with using Formatter One Pro
OS
SUN Systems
SGI Systems
HP Systems
SCO Systems
4.1GB media
4.8GB media
5.2GB media
O
X
X
O
X
X
O
O
O
O
X
X
Table 2. Media support table-2
Capacity
4.1GB
4.8GB
5.2GB
Name
Sector Size
EDM-4100
EDM-4800
EDM-5200
512 Byte/sector
1024 Byte/sector
2048 Byte/sector
Table 3. Media information table
19
|
Sharp Air Cleaner FP R30CX User Manual
Sharp Flat Panel Television LE914 User Manual
Soehnle Postal Equipment 7711 User Manual
Sony Camcorder Accessories VCT 1500L User Manual
Sony CD Player 4 427 110 411 User Manual
Sony Flat Panel Television 40EX621 User Manual
Star Micronics Printer MP400 Series User Manual
Stiga Lawn Mower 13 2570 13 User Manual
Sunbeam Microwave Oven SMW958 User Manual
SUPER MICRO Computer Network Card 6015W NT User Manual