2-635-473-14(1)
Features
Preparing
The RM-AX4000 Remote Commander provides
centralized control of all your AV components
from a single remote control and saves the trouble
of operating different AV components with
different remote control devices. The following are
its main features.
Integrated Remote Commander
RM-AX4000A
RM-AX4000
4 Set the hour and AM (or PM) by
Unpacking
Setting the clock
pressing the F or f button.
Comfortable operation with
the Remote Commander
Check the contents of the package before using the
Remote Commander.
When you install batteries the first time, the
Remote Commander enters clock setup mode.
“DS_TIME” appears as the Display title.
“STD_TIME” lights and “SET” and “DS_TIME”
flash on the Label keys.
The selected hour and AM (or PM) flash.
Control up to 16 components
With the Remote Commander, you can control up
to 16 components, including your TV, VCR, DVD,
DVR, CD, RCVR, etc.
• Remote Commander RM-AX4000 (1)
Although the packaging may say RM-AX4000A,
the Remote Commander is RM-AX4000.
Operating Instructions
You can easily download a variety of settings from your PC to the Remote Commander (RM-AX4000)
using the “AX Remote Editor.”
STD_TIME: standard time
DS_TIME: daylight savings time
Centralized control of Sony AV components
with this one Remote Commander
The Remote Commander is preset at the factory to
operate Sony brand components, so you can use it
out of the box as a control center for your Sony AV
components.
Quick Start Guide
SU
LEARN
NG
DS_TIME
Easy setup on your PC!
AX Remote Editor
Remote control signals for non-Sony
components are also preset
The Remote Commander also recognizes the preset
codes for most major brands components, as well
as Sony. Just select the corresponding codes to
control all your AV components.
Download setting files to
the Remote Commander
SET
[STD_TIME]
DS_TIME
• USB cable (1)
1 Press “STD_TIME” or “DS_TIME”
Next, press the g button. The hour and AM (or
PM) are set.
“00” (minute) and “SET” flash.
on the Label keys.
XPRESS functions for executing a series of
actions to operate several AV components
by pressing just one key.
Groups of commands from different components
can be set for up to 8 XPRESS functions. For
example, when you watch a DVD using a TV and
amplifier/receiver, you can press just one key to
turn on/off each component, and select the correct
inputs. Available keys for the XPRESS function
appear on the LCD display.
Also, the XPRESS function can memorize the
status of power on/off, input select status of each
component, and send a signal to synchronize them
to the Remote Commander, regardless of their
current.
• CD-ROM* (1)
– AX Remote Editor software
– Operating Instructions (PDF file)
Comfortable
operation
SU
or
LEARN
NG
AM
CLOCK
Refer to the PDF file “Operating
Instructions”
The current setting is shown inside the [ ],
while the other flashes.
If the summer time (daylight savings time) is
used in your area, press the DS_TIME key.
When the time change occurs (in spring and
autumn), the Remote Commander will
automatically adjust itself.
Refer to the PDF file “Operating Instructions” for more information and for
troubleshooting.
SET
STD_TIME
How to display the PDF file “Operating Instructions”
The PDF file “Operating Instructions” will be installed when the AX Remote
Editor software is installed. Click [Start] - [All Programs] - [Sony Remote
AX] - [RM-AX4000 Operating Instructions] on your PC.
• Quick Start Guide (1)
• Preset Code Lists (1)
• Warranty Card (1)
* Do not attempt to play this CD-ROM in an audio
CD player.
Note
If the summer time is not used in your area,
press the STD_TIME key.
If you press the G button, the hour and AM (or
PM) are set and the setting mode returns to
step 3.
You need Adobe Acrobat Reader 5.0 or later, or Adobe Reader software in
your PC.
Air-Slide executes an XPRESS function by
“sliding your finger” across the LCD
display
2 Press “SET” on the Label keys.
5 Set the minute by pressing the F or
f button.
SET
You can also perform an XPRESS function by
sliding your finger in a set pattern across the
Remote Commander’s LCD Display. This function
is called an “Air-Slide”, and 6 different patterns are
available.
The AX Remote Editor software allows you to
make advanced settings for the Remote
Commander.
You can also set up the
Remote Commander yourself,
without using a PC. See the
PDF file “Operating
Installing the batteries
The selected minute flashes.
Slide and open the battery compartment lid and
insert four size AA (R6) alkaline batteries (not
supplied). Be sure to match the + and – of the
batteries with the + and – of the battery
compartment.
A beep sounds, “SET” and “SU” flash, and
“12:00 AM” lights on the Clock display.
Use the Remote Commander to control all
your components!
Printed on 100% recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
Instructions” for details.
SU
LEARN
NG
AM
CLOCK
Clock display and Timer function
Up to 8 Timer macros can be programmed to
automatically turn on/off components and other
controls (such as recording, stopping, etc.).
© 2005 Sony Corporation Printed in Malaysia
SET
STD_TIME
Learning function lets you program other
remote control signals you may need
The Remote Commander can learn the remote
control infrared signals of non-preset components.
The Remote Commander can learn remote control
signals (infrared signals only) of other devices such
as air conditioners, lights, etc. (some specific
appliances or functions may not be available).
3 Set the day of the week by pressing
If you want to finish the clock setting, go to
step 6.
qa SYSTEM CONTROL buttons
Declaration of Conformity
You can automatically carry out the entire
program by pressing one button.
qs Display title
WARNING
the F or f button.
Location and function of
Trade Name:
SONY
Model Number: RM-AX4000
Responsible Party:
SU
The selected day of the week flashes.
LEARN
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
NG
CLOCK
controls
Shows the title of the LCD Display. If a page
number such as “/1” appears, multiple pages
are available. If you press the number, next
page displays.
Sony Electronics Inc.
16530 Via Esprillo,
San Diego, CA 92127 USA
SU : Sunday
Address:
System Control function executes a series
of actions (a macro) by pressing one
button/key
In addition to the XPRESS function, more settings
can be programmed to perform a series of actions
(a macro) just by pressing one button. You can
program up to 8 System Control functions.
Furthermore, you can program a series of actions
(a macro) to other buttons as a single step of an
XPRESS function or component operation.
MO : Monday
TU : Tuesday
WE : Wednesday
TH : Thursday
FR : Friday
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
Telephone Number:
858-942-2230
1
qs
qd Touch-keys
The keys are used for setting the Remote
Commander and operating each component
appear on the LCD display.
SET
STD_TIME
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
qd
qf
SA : Saturday
Notes
2
3
qf SYNC-UP button
•
If you press the g button, the minute is set
and the setting mode returns to step 3.
If you press the G button, the minute is set
and the setting mode returns to step 4.
Used to synchronize the Remote Commander
with the status of a component .
qg TIMER button
Used to set the timer program on/off.
qh COMMANDER OFF button
Turns the power of the Remote Commander
off.
qj LIGHT button
qg
qh
4
5
6
7
8
9
0
COMMANDER
LIGHT OFF
XPRESS
EPG
•
BACK COMPONENT
SYNC-UP TIMER
VOLUME
When to replace the batteries
Owner’s Record
The model number is located on the rear of the
unit and the serial number is located in the battery
compartment.
KeyMacro function allows you to select a
channel with a single key
CHANNEL
MENU
qj
When replacing the batteries, do it
quickly. Otherwise, the memory settings
for the clock will be erased. The clock
does not work while replacing the
Notice for users
On the supplied software
The Remote Commander allows you to program a
macro for a key to operate an AV component. For
example, you can create a macro that enters the
numbers 1, 2, and 3, to select channel 123 just by
pressing one key.
The AX Remote Editor software allows you to
make advanced settings for the Remote
Commander.
6 Press “SET” on the Label keys.
OK
qk
ql
w;
EXIT
TOOLS
Record the serial number in the space provided
below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No. RM-AX4000
• Copyright laws prohibit reproducing the
software or the manual accompanying it in
whole or in part, or renting the software without
the permission of the copyright holder.
• In no event will SONY be liable for any financial
damage, or loss of profits, including claims made
by third parties, arising out of the use of the
software supplied with this unit.
• In the event a problem occurs with this software
as a result of defective manufacturing, SONY
will replace it.
However, SONY bears no other responsibility.
• The software provided with this unit cannot be
used with equipment other than that which is so
designated.
• Please note that, due to continued efforts to
improve quality, the software specifications may
be changed without notice.
• Operation of this unit with software other than
that provided is not covered by the warranty.
Program © 2005, 2006 Sony Corporation
Documentation © 2005, 2006 Sony Corporation
Next, press the g button. The day of the week
is set.
“12” (hour) “AM” and “SET” flash.
SET
MUTING
MORE
RECALL
SYSTEM CONTROL
Used to brighten the backlight in the dark.
Press the button once to turn on/off the
backlight.
1
2
3
4
ALL OFF
batteries.
wa
ws
wd
Alkaline batteries will last up to 5 months (a Sony
TV turned On/Off up to approx. 300 times per
day). If the Remote Commander does not operate
properly, the batteries are getting weak and E
appears on the LCD display. When the LCD
display dims or the backlight for the touch keys
grows dim, the batteries are getting weak, and
need to be replaced.
SU
The beep sounds, and the clock starts from the
0 second of the current minute.
Serial No.
LEARN
NG
AM
CLOCK
qk CHANNEL +/– buttons
Selects the channel.
ql VOLUME +/– buttons
Adjusts the volume.
w; RECALL button
wa ALL OFF button
ws MUTING button
qa
INFORMATION:
Easy-to-operate Touch-key LCD with blue
back light
The CHANNEL + button has a tactile dot.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
The Remote Commander has a Touch-key LCD
that changes keys and labels according to the
selected component. The Remote Commander is
easy to operate as only the keys necessary to
operate the selected component are shown. The
display backlight allows operation even in the
dark.
Note
1 Clock display
If you press the SET key in any step above, the
clock starts from the 0 second of the current
minute.
Displays the clock, the transmission mark, the
battery mark and the timer mark.
2 Label keys
SET
STD_TIME
Notes on replacing the batteries
• Do not attempt to recharge dry batteries.
• Do not carry dry batteries together with coins or
other metallic objects. This can generate heat if
the positive and negative terminals of the
batteries accidentally come into contact with
metallic objects.
• When you are not going to use the unit for a long
time, remove the batteries to avoid damage from
battery leakage and corrosion.
• Do not use different types of batteries at the same
time.
• When you replace the batteries, replace them
both with new ones.
Silences the sound. Press the button to silence,
and again to return to the previous volume
level.
Note
Different keys appear depending on the
selected function. The Label keys are used
mainly to choose the XPRESS function/
component/System Control/Timer/setting
items, etc. You can change the names of the
XPRESS function, components, System Control
key and Timer as the Label keys.
If you press the G button, the day of the week
is set and setting mode skips to step 5.
wd MORE button
The supplied software “AX Remote Editor”
for easy Remote Commander setup
By installing the “AX Remote Editor” on the
supplied CD-ROM onto your PC, you can
customize the setting of the Remote Commander
according to your preferences. You can also
program various advanced settings easily.
The settings programmed on your PC can be
transferred to the Remote Commander as
necessary using the supplied USB cable.
The System Control keys (SYSTEM5-8) are
displayed as the Label keys. When you press a
System Control key, its macro is performed.
Note on the LCD display’s power
on/off
3 COMPONENT button
The component names appear as the Label
keys. When you press a component name, the
operating display for that component appears.
To turn on the LCD display, press any button
except the COMMANDER OFF button.
To turn off the LCD display, press the
COMMANDER OFF button. If you do not use the
Remote Commander within 5 minutes, the LCD
display automatically turns off.
Microsoft, Windows and Windows Media are
trademarks or registered trademarks of Microsoft
Corporation in the United States and/or other
countries.
All other trademarks and registered trademarks
are trademarks or registered trademarks of their
respective holders.
In this guide, ™ and ® marks are not specified.
Adobe Reader is a trademark of Adobe Systems
Incorporated.
• Microsoft Windows XP Media Center Edition,
Microsoft Windows XP Professional and
Microsoft Windows XP Home Edition are
mentioned as Windows XP in this guide.
• Microsoft Windows 2000 Professional is
mentioned as Windows 2000 in this guide.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
and receiver.
– Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
4 BACK button
Used to return to the previous display.
5 XPRESS button
The XPRESS names appear as the Label keys.
When you press an XPRESS name, the
operating display for that XPRESS function
appears, and its macro is performed.
This interval can also be changed.
Specifications
– Consult the dealer or an experienced radio/TV
technician for help.
See the PDF file “Operating Instructions” for the
Specifications.
6 MENU button
If you have any questions about this product, you
may call; Sony Electronics Support 1-866-922-7669
Calls up the menu screen for components that
have menu function.
7 EPG button
8 OK and Cursor Control buttons
9 EXIT button
q; TOOLS button
Continue to reverse side
|