Sony Headphones SCEH 00075 User Manual

Wireless Headset  
User’s Guide  
SCEH-00075  
SCEH-00087  
Before using this product, carefully read the supplied documentation.  
 
1. Warnings  
To reduce the risk of electric shock, explosion or fire, use only the supplied charging cradle or the supplied  
USB cable to charge the product. Do not use the charging cradle with other products or for any other  
purpose.  
• Charge the headset according to the supplied instructions.  
1.1 Recycling instructions for customers in Europe  
Where you see either symbol on any of our electrical products, batteries or packaging,  
it indicates that the relevant electrical product or battery should not be disposed of  
as general household waste in Europe.To ensure the correct waste treatment of the  
product and battery, please dispose of them in accordance with any applicable local  
laws or requirements for disposal of electrical equipment/batteries. In so doing, you will help to conserve  
natural resources and improve standards of environmental protection in treatment and disposal of  
electrical waste  
1.2 Lithium-ion battery in Wireless Headset  
The Lithium-ion polymer battery included in this product is permanently built-in for safety, performance or  
data integrity reasons. The battery should not need to be replaced during the lifetime of the product and  
should only be removed by skilled service personnel. To ensure the correct waste treatment of the battery,  
please dispose of this product as electrical waste.  
 
2. Before use  
This guide contains instructions for setting up and using your Wireless Headset with your PS3™ system as  
well as with other Bluetooth® compatible mobile phones and devices.  
2.1 Precautions  
Before using this product, carefully read this manual and retain it for future reference. Also refer to the  
instructions for your PLAYSTATION®3 system for further precautions and information.  
2.2 Use and handling  
• Stop using this product immediately if it causes discomfort or pain.  
• Do not expose the product to high temperatures, high humidity or direct sunlight.  
• Do not allow the product to come into contact with liquids.  
• Do not put heavy objects on the product.  
• Do not throw or drop this product, or physically damage it in any way.  
• Do not touch or insert foreign objects into the connectors of this product.  
• Do not attempt to disassemble or modify this product.  
• Do not twist the supplied USB cable or pull it forcibly.  
• When using this product, it is recommended that you limit volume to help avoid harm to your ears and  
danger resulting from being unable to hear what is going on around you.  
• Do not place any rubber or vinyl materials on the product exterior for an extended period of time.  
• Use a soft, dry cloth to clean the product. Do not use solvents or other chemicals. Do not wipe with a  
chemically-treated cleaning cloth.  
• Small parts. Not suitable for children under six years.  
• Comply with laws regarding use of a mobile phone and headset while driving. If you use the headset while  
driving, make sure that your attention and focus remain on driving safely.  
• Observe all signs and instructions that require an electrical device or radio product to be switched off  
in designated areas, such as petrol/refuelling stations, hospitals, blasting areas, potentially explosive  
atmospheres or aircraft.  
PLEASE NOTE: the information in this manual was correct at the time of publication, but some minor changes  
may have been made late in the product’s development. All screenshots for this manual have been taken  
from the English version of this product.  
 
3. Part names  
7
1. Power button  
6
5
1
3
2. Volume + button  
3. Volume – button  
4. Mic muting button  
5. Mic muting indicator  
6. Power indicator  
7. Ear clip  
2
4
8. Charging cradle  
8
4. Charging your headset  
Your headset performs best when fully charged. You can charge the headset by using the charging cradle or  
directly via a USB cable.  
Warning  
Do not wear your headset while it is connected to the charging cradle or a USB cable.  
4.1 Charging time  
Approximate time for full charge using charging cradle or USB  
3 hours  
1 hour  
Minimum charge before first use  
Hint  
To check the headset’s battery level, you must pair it using automatic mode and not Bluetooth® discovery mode.  
Further information on pairing your headset and viewing the battery level on your monitor/TV can be found later in  
this manual.  
 
4.2 Using the charging cradle  
For convenience, you can connect the charging cradle to a USB device to allow easy access to the headset.  
Wireless Headset  
USB connector  
PS3™ system  
1
Charging cradle  
4
3
2
USB connector  
USB cable  
mini-B connector  
1 Check that the device the charging cradle is to be connected to is turned on.  
2 Insert the USB connector of the supplied USB cable into an available USB connector.  
3 Insert the mini-B connector of the USB cable into the USB connector on the charging cradle.  
4 Place the headset into the charging cradle.  
When power is first applied to the headset, the mic muting indicator lights up solid red for two seconds and  
then flashes on and off every three seconds until the headset is fully charged.  
 
4.3 Charging without the cradle  
You can charge the headset directly from a USB device.  
Wireless Headset  
PS3™ system  
1
USB connector  
3
2
USB connector  
mini-B connector  
USB cable  
1 Check that the device the headset is to be connected to is turned on.  
2 Insert the USB connector of the supplied USB cable into an available USB connector.  
3 Insert the mini-B connector of the USB cable into the headset USB connector.  
When power is first applied to the headset, the mic muting indicator lights up solid red for two seconds and  
then flashes on and off until the headset is fully charged.  
5. Pairing your headset  
Before you can use the Wireless Headset with any device, such as a PS3™ system or a mobile phone, the  
headset must be paired with the desired device.  
You can pair your headset in either of two ways:  
• Automatic mode (using the supplied USB cable) – the headset includes a variety of advanced features  
for the PS3™ system which can be enabled by pairing (registering) the headset and the PS3™ system  
using automatic mode. Using automatic mode, you can pair the headset with any PS3™ system, but only  
the most recently paired PS3™ system will be saved in the headset’s list of paired devices. For more  
information, see “7.Connecting your headset to Bluetooth® devices.”  
• Bluetooth® discovery mode – set up the headset as a standard Wireless Headset. Using Bluetooth®  
discovery mode, you can pair the headset with many other Bluetooth® devices.The eight most  
recently paired devices are saved in the headset’s list of paired devices. For more information,  
see “7. Connecting your headset to Bluetooth® devices.”  
Hints  
The headset’s advanced features for the PS3™ system are available only when you use the automatic mode to pair  
the headset with the PS3™ system.  
To access the advanced features, the system software in use on the PS3™ system must be version 2.50 (or later).  
 
5.1 Pairing with the PS3™ system: automatic mode  
You must use the USB cable to pair your headset using automatic mode.  
1 Check that the PS3™ system is turned on.  
2 Check that the PS3™ system software is version 2.50 or later. If you have an earlier version, you need to  
update the system software before you can use automatic mode for pairing.  
3 Insert the mini-B connector of the supplied USB cable into the USB connector on your headset. Insert the  
other end of the cable into a USB connector on the PS3™ system.  
The power indicator on the headset lights up in solid green for two seconds to indicate that the headset and  
the PS3™ system have been paired.  
Power indicator  
Hint  
When automatic mode is used to pair your headset, HQ mode is initially turned on.  
See the “10. Headset features for your PS3™ system” section later in this manual for more information.  
5.2 Pairing with the PS3™ system: Bluetooth® discovery mode  
1 Check that the PS3™ system is turned on.  
2 Press and hold the power button on the headset until the power and mic muting indicators flash  
alternately in green and red, indicating that the headset is in Bluetooth® discovery mode.  
3 On your PS3™ system’s Home Menu, go to [Settings], then [Accessory Settings] and select  
[Manage Bluetooth® Devices].  
4 Select [Yes] to pair (register) the headset with the PS3™ system.  
5 Select [Start Scanning].  
The PS3™ system scans for the headset and a list of all Bluetooth® devices within range will be displayed.  
6 Select [Wireless Headset]. When prompted for a pass key, enter “0000”.  
Your headset is now paired with the PS3™ system.  
 
5.3 Pairing with a mobile phone  
You can use your headset with any Bluetooth®-enabled mobile phone, although advanced features such as  
three way calling are not available with this headset.  
Hint  
If you use automatic mode to pair your headset with your PS3™ system, and also pair your headset with a mobile  
phone, the headset gives priority to the PS3™ system when both are in range. The headset will connect to your  
PS3™ system, not the mobile phone.  
1 Check that the mobile phone is turned on.  
2 Press and hold the power button on the headset until the power and mic muting indicators flash  
alternately in green and red, indicating that the headset is in Bluetooth® discovery mode.  
3 Turn on the Bluetooth® feature on your mobile phone to enable it to scan for the headset. See your mobile  
phone’s instruction manual for further information on activating the phone’s Bluetooth® functionality.  
4 From the list of devices, select [Wireless Headset]. When prompted for a pass key, enter “0000”.  
Your headset is now paired with the mobile phone.  
6. Turning your headset on and off  
6.1 To turn on your headset  
Press and hold the power button for approximately three seconds until a melody plays and the power  
indicator lights solid green for two seconds. This indicates that the headset is on.  
For more detailed information regarding how the headset connects to devices when you turn it on, see the  
7. Connecting your headset to Bluetooth® devices” section of this manual.  
6.2 To turn off your headset  
Press and hold the power button for at least five seconds until a melody plays and the power indicator flashes  
green. This indicates that the headset is turning off. When the indicator is no longer lit, the headset is off.  
 
7. Connecting your headset to Bluetooth® devices  
When you turn on your Wireless Headset, it automatically tries to connect to paired devices within range. If  
you have paired the headset with more than one device, the headset uses the following priority to determine  
which device it will connect to:  
1 A PS3™ system that was paired using automatic mode. If the headset finds the PS3™ system within five  
seconds, it will stop searching for other devices and connect to the PS3™ system. Further information on  
pairing the PS3™ system using automatic mode can be found earlier in this manual.  
2 The most recent device (PS3™ system or other Bluetooth®-enabled device) that the headset was  
connected to with which it was paired using Bluetooth® discovery mode. If the headset finds the device  
within five seconds, the headset will stop searching for other devices and connect to the device. If the  
device is not found, the headset will commence searching (page scan) mode.  
3 To connect the headset with the next most recent device it was connected to, short press the power  
button, If that device is found within five seconds, the headset stops searching for devices and makes the  
connection. If this device is not found, the headset goes into searching (page scan) mode. The user can  
short press the power button every five seconds until it connects to a device from the list of eight most  
recently connected devices.  
If the headset cannot find any devices to connect to within five minutes after it is turned on, it will turn off  
automatically.  
8. Testing and configuring the headset  
After you have connected the headset to the PS3™ system, you can verify that the PS3™ system is  
receiving voice input from the headset and that the headset is correctly playing output.  
To test and configure your headset:  
On your PS3™ system’s Home Menu, go to [Settings], then [Accessory Settings] and select  
[Audio Device Settings].  
After you pair a Bluetooth® device with the PS3™ system, the Bluetooth® device becomes the default for  
both input and output audio. If the headset is working correctly, you can hear your voice loop back in the  
headset. The audio input bar indicates your voice level.  
 
9. Wearing your headset  
Warning  
Do not wear your headset while it is connected to the charging cradle or a USB cable.  
9.1 Adjusting the fit  
1
2
3b  
4
3a  
1 Gently push open the ear clip.  
2 While holding the ear clip open, slide it behind your ear.  
Hint  
The headset comes ready to wear on your right ear. To wear it on your left ear, change the ear clip position as  
explained below in “9.2 Changing the ear clip”.  
3 Adjust the headset (3a) until it fits comfortably on your ear. For maximum comfort, you can change the  
shape of the ear clip (3b).  
Hint  
An additional earpiece ring is included – use the one that feels most comfortable.  
4 For optimal voice clarity, point the boom toward the corner of your mouth.  
9.2 Changing the ear clip  
1 Gently pull the bottom of the ear clip off the hinge pin.  
2 Flip the clip over so that it is symmetrically opposite from its original position.  
3 Hook the bottom of the clip onto the hinge pin.  
 
10. Headset features for your PS3™ system  
When you use automatic mode to pair your Wireless Headset with your PS3™ system, the following  
advanced features are enabled:  
• User Action Indicators on your monitor/TV  
• Notifications of headset status on your monitor/TV  
• High-Quality (HQ) Mode  
• Desktop Mic Mode  
• Low battery warning  
10.1 User action indicator  
Any time you connect or pair the headset, or press any of the headset’s buttons, a User Action Indicator (UAI),  
containing both text and icons, is displayed on your monitor/TV for two seconds. UAIs may look similar to the  
following:  
Speaker volume  
The left-most icon indicates the speaker volume by showing zero to three waves. An “X” over the speaker  
icon indicates a minimal volume (effectively muted); three waves indicates the maximum volume.  
Microphone status  
The microphone icon indicates whether mic muting is on (an “X” is over the microphone icon) or off  
(no microphone icon).  
High Quality (HQ) mode status  
When High Quality mode is on, HQ is displayed in the UAI.When High Quality mode is off, HQ is not  
displayed in the UAI.  
 
Battery level  
The right-most icon indicates how much charge remains in the headset.  
Blinking:  
3 cells:  
2 cells:  
1 cell:  
Charging  
70%-100%  
30%-69%  
10%-29%  
Less than 10%  
No cells:  
Hint  
The battery level indication is available only if you used automatic mode to pair your headset and PS3 system. If  
you used Bluetooth® Discovery mode, the headset’s red mic muting indicator will flash every 10 seconds when the  
battery is low.  
10.2 Notifications  
In certain situations, such as headset disconnection, low battery and connection errors, the headset will  
display text notifications on your monitor/TV. These messages are for information only, and do not require any  
action. The messages automatically disappear after five seconds. They may look similar to the following:  
10.3 HQ mode  
The headset’s High Quality (HQ) mode enables wide-band wireless voice communication with the PS3™  
system. It uses the headset’s dual-microphone design to enable proprietary PS3™ system-based noise  
cancelling, and provides better radio frequency interference rejection when it is turned on than when it is off.  
By default, HQ mode is on when you first pair your headset and PS3™ system.  
HQ mode and noise cancellation features are only available for the PS3™ system, not with other Bluetooth®-  
enabled devices or mobile phones.  
To turn HQ mode on or off  
1 On your PS3™ system’s Home Menu, go to [Settings], then [Accessory Settings] and select [Manage  
Bluetooth® Devices].  
2 Select the headset from the list of registered devices, press the button, and then select [Information]  
from the options menu.  
3 Access High Quality (HQ) Mode.  
4 Select On or Off.  
 
10.4 Desktop Mic mode  
If your headset charge runs low, you can use the headset as a desktop microphone (or ‘far-field’ microphone)  
while charging it.  
To enter Desktop Mic mode  
1 Check that the PS3™ system is turned on.  
2 Insert the USB connector of the supplied USB cable into a USB connector on the PS3™ system.  
Hint  
You can use any powered port of a USB certified device, on any PC, so long as it is within Bluetooth® range of the  
PS3™ system.  
3 Insert the mini-B connector of the USB cable into the charging cradle.  
4 Place the headset into the charging cradle. The headset turns off and starts charging.  
5 To reconnect the headset to the PS3™ system and use it in Desktop Mic mode, turn on the headset by  
pressing its power button for three seconds.  
11. Using your headset with a mobile phone  
When used with a mobile phone, your Wireless Headset functions similarly to a standard Bluetooth®-enabled  
headset. You can answer, cancel and end calls; transfer from the headset to the phone, and redial the most  
recent number you called. For more information, see the “12. Headset controls” and “13. Headset indicators”  
sections of this manual.  
 
12. Headset controls  
12.1 When connected to a PS3™ system  
Turn on the headset  
Press and hold the power button for about three  
seconds  
Turn off the headset  
Press and hold the power button for at least five  
seconds  
Mute the microphone (when in an active voice state) Press the mic muting button  
Cancel microphone muting  
Adjust the volume  
Press the mic muting button  
Press the volume + or volume – button. Each press  
adjusts the volume by one level  
A long press adjusts the volume by two levels  
A very long press adjusts the volume to maximum  
(with the volume + button) or minimum (with the  
volume – button)  
12.2 When connected to a mobile phone  
Turn on the headset  
Press and hold the power button for about three  
seconds  
Turn off the headset  
Press and hold the power button for at least five  
seconds  
Mute the microphone (when in an active call)  
Cancel microphone muting  
Press the mic muting button  
Press the mic muting button  
Adjust the volume  
Press the volume + or volume – button.  
Each press adjusts the volume by one level  
A long press adjusts the volume by two levels  
A very long press adjusts the volume to maximum  
(with the volume + button) or minimum (with the  
volume – button)  
Answer a call  
Briefly press the power button  
Reject a call  
Press and hold the power button for two seconds  
Briefly press the power button  
End a call or cancel an outgoing call  
Transfer a call from headset to phone  
Transfer a call from phone to headset  
Redial the last number  
Press and hold the power button for two seconds  
Press and hold the power button for two seconds  
Press and hold the power button for two seconds  
 
13. Headset indicators  
The green (power) and red (mic) muting lights indicate the headset’s status.  
13.1 General indicator lights  
Green (solid for two seconds)  
Power on or pairing success via Bluetooth®  
discovery or automatic mode  
Connected or page scan  
Connection success  
Green (one flash every three seconds)  
Green (two flashes)  
Green (two flashes every three seconds)  
Green (six flashes)  
Active call or active voice chat  
Power off  
Green and red (alternating flashes)  
Red (solid for two seconds)  
Red (solid)  
Pairing mode: Bluetooth® discovery  
Pairing failure  
Charge complete  
Red (one flash every three seconds)  
Red (one flash every 10 seconds)  
Charging  
Battery low or microphone muted  
13.2 Indicator lights when connected to a mobile phone  
Green (one flash every three seconds)  
Green (three flashes every three seconds)  
Connected (no call or voice chat)  
Incoming call  
 
13.3 Headset tones  
Medley  
Power on or power off  
One beep  
Any of the following:  
• Mic muting turned off  
• Volume adjust  
• Answer call  
• Long press of button completed for one of the  
following:  
– Volume adjustment  
– Redialling last number  
Transferring a call from headset to phone  
– Rejecting a call  
One beep every three seconds  
Two beeps  
Incoming call  
Connection success or reject call  
Mic muting on  
Two beeps every 10 seconds  
Three beeps every 10 seconds  
One long beep  
Battery low  
Any of the following:  
• Enter pairing mode  
• Pairing success  
• Maximum volume  
• Minimum volume  
• Audio transfer  
• Cancel/drop call  
 
14. Troubleshooting  
My headset stopped responding.  
Pair (register) the headset again with the PS3™  
system using automatic mode.  
Hint  
Remove the headset from the list of registered devices,  
and then repeat the pairing process.  
My headset is stuck in pairing mode  
Pair (register) the headset again with the PS3™  
(power and mic muting indicators flash alternately  
in green and red) and cannot be powered off.  
system using automatic mode.  
Hint  
Remove the headset from the list of registered devices  
and then repeat the pairing process.  
The PS3™ system’s advanced headset features  
do not work.  
Make sure you pair the headset using automatic  
mode, not Bluetooth® discovery mode. Check that  
the PS3™ system software is version 2.50 or later.  
See “5.1 Pairing with the PS3™ system: automatic  
mode”.  
Audio quality is poor.  
Make sure that the headset is placed correctly in  
your ear with the boom pointing toward the corner  
of your mouth. See “9.1 Adjusting the fit”.  
In HQ mode, there is audio latency.  
Some games may exhibit long audio latency in HQ  
mode. Try turning off HQ mode.  
My headset does not work with my phone.  
Verify that your phone supports Bluetooth®.  
Make sure the headset is fully charged.  
Make sure the headset is paired with the phone you  
are trying to use.  
See “5.3 Pairing with a mobile phone”.  
My phone did not locate the headset.  
Verify that your phone supports Bluetooth®.  
Turn both your phone and headset off and on, and  
then repeat the pairing process.  
I am trying to pair my headset with a phone  
and cannot enter the PIN code.  
Turn both your phone and headset off and on, and  
then repeat the pairing process.  
Enter 0000 as the PIN code or pass key.  
 
I cannot hear the caller/dial tone on my phone.  
The headset is not turned on. Press and hold the  
power button for about three seconds until a melody  
plays and the power indicator lights solid green,  
which indicates that the headset is on.  
Your headset is out of range. Move the headset  
closer to your phone.  
The listening volume is too low. Press the volume +  
button to raise the volume.  
Make sure that the headset fits properly.  
See “9. Wearing your headset”.  
Callers on my phone cannot hear me.  
The earpiece ring does not fit my ear.  
My headset falls off my ear.  
Your headset is out of range. Move the earpiece  
closer to your phone.  
Try the other earpiece ring that is included with the  
Wireless Headset. See “9. Wearing your headset”.  
Check that the headset is placed correctly in your  
ear with the boom pointing toward the corner of  
your mouth. See “9.1 Adjusting the fit”.  
15. Product specifications  
Talk Time  
Up to 8 hours  
Standby Time  
Charge Time  
Operating Range  
Headset Weight  
Approximately 12.5 days (300 hours)  
3 hours  
Up to 33 feet (10 metres)  
2.0 oz (58 g)  
Battery Type  
Voltage  
Lithium-ion polymer battery  
DC 3.7 V  
Capacity  
190 mAh  
Storage/Usage Temperature  
Bluetooth® Version  
5°C to 35°C (41°F to 95°F)  
Bluetooth® 2.1 + EDR (Enhanced Data Rate)  
Headset Profile (HSP) for talking on the headset  
Bluetooth® Profiles  
Hands-free Profile (HFP) for talking and operating  
the headset  
Design and specifications are subject to change without notice.  
 
16. Limited warranty  
Where a 1-year warranty is supplied with your PLAYSTATION®3 system, such warranty also applies to  
this product. For details, please see the PLAYSTATION®3 Safety and Support Guide, available online at  
eu.playstation.com/ps3, or call the PLAYSTATION®3 Customer Service number, which can be found within  
every PLAYSTATION®3 format software manual.  
2,PlayStation”,PLAYSTATION” and “PS3” are trademarks or registered trademarks of Sony Computer  
Entertainment Inc. “SONY ” is a registered trademarks of Sony Corporation. All rights reserved.  
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Sony  
Computer Entertainment Inc. is under licence.  
N136  
TA-2008/737  
Approved  
 

SonicWALL Network Router EM5000 User Manual
Sony Car Stereo System CDXGT630UI User Manual
Sony CRT Television KDL 32XBR4 User Manual
Sony Stereo Receiver AVD S50 User Manual
SoundMax Car Stereo System SM CMD2021 User Manual
Speco Technologies Security Camera CVC 620WP User Manual
Sunbeam Iron 4040 026 User Manual
Sunrise Medical Mobility Aid 4 User Manual
Supersonic TV Video Accessories SC 55 SVID User Manual
SVAT Electronics Security Camera ISC203 User Manual