Quick Start Guide
Table of Contents
Introduction
1
2
3
Preparing the Printer
Installing the FINE Cartridges
Installing the Printer Driver
6
6
9
®
Installing the Printer Driver - Windows
®
Installing the Printer Driver - Macintosh
Basic Operations
12
12
13
Printing with Windows
Printing with Macintosh
Replacing a FINE Cartridge
14
QA7-3559-V01
BE
Introduction
This Quick Start Guide uses the following symbols to indicate important information. Always observe the
instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect
operation of the equipment. These must be observed for safe operation.
Also read the Safety Precautions in the User’s Guide. Observe the warnings and cautions to avoid
personal injury or damage to the printer.
The diagrams and computer screens in this guide refer to the iP2200. The operations are exactly the
same with the iP1600/iP1200, unless otherwise described.
Trademark Notices
• Windows is a trademark of Microsoft Corporation, registered in the United States and other countries.
• Macintosh and Mac are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
• All other product and brand names are trademarks of their respective owners.
Copyright ©2005 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without expressed written permission from Canon Inc.
1
Preparing the Printer
1
2
Place the printer on a flat surface.
Remove the tapes from the printer as
shown.
The tape position is subject to change.
3
4
5
Open the Paper Support and the Front
Cover.
Remove the Protective Material on the
right side.
Close the Front Cover.
Protective Material
2
Installing the FINE Cartridges
• Never attempt to plug the power cord into the power outlet or unplug the power cord when your
hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy
objects on the power cord.
• Never use any power supply other than the standard power supply available in the country of
purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
• When you use the iP2200 or iP1600
Be sure to use the iP2200 or iP1600 with both Black and Color FINE Cartridges (PG-40, CL-41).
Otherwise, the printer cannot print. When either of ink runs out while printing, you can select either
Color or Black ink as a printer driver setting. However you must use the printer with both Black
and Color FINE Cartridges loaded regardless of the printer driver setting.
• When you use the iP1200
The iP1200 is a model that can print only with a Color FINE Cartridge (CL-41).
By installing an optionally available Black FINE Cartridge (PG-40), the iP1200 can print using
both Black and Color inks just like the iP2200 and iP1600.
• For safety reasons, store FINE Cartridges out of the reach of small children.
• Do not drop or shake FINE Cartridge as this may cause the ink to leak out and stain your clothes and
hands.
1
2
Plug the printer in.
Turn on the printer. Do NOT turn on the
computer yet.
The POWER lamp flashes and the printer begins to
operate. Wait until the POWER lamp remains fully lit.
3
4
Open the Front Cover.
ON
The FINE Cartridge Holder moves to the left.
Take out the Color FINE Cartridge from
its casing.
3
To the FINE Cartridge Holder
5
Remove the Protective Tape gently.
Electrical Contacts
• Do not touch the electrical
contacts or Print Head
Nozzles on a FINE Cartridge.
• Handle the removed
Protective Tape carefully to
avoid getting your hands
dirty or staining surrounding
work area.
Protective Tape
Print Head Nozzles
• Do not attempt to reattach the
Protective Tape once you
have removed it.
6
Insert the Color FINE Cartridge slightly
slanted into the right slot (C).
7
Push up the cartridge until it clicks into
place.
4
8
9
Use the same procedure to install the
Black FINE Cartridge.
The Black FINE Cartridge should be installed into the
left slot (B).
Close the Front Cover.
Wait until the preparatory operation is complete; it
takes about one to two minutes.
5
Installing the Printer Driver
®
Installing the Printer Driver – Windows
• Before installing the driver, disable all anti-virus programs and automatically loading programs.
• The screens shown in this guide are for a computer running on Windows XP with Service Pack 2
installed (hereafter called Windows XP SP2). Screens may differ depending on the operating
system you are using.
• When installing the printer driver in Windows XP or Windows 2000, log on to the system as a
member of the Administrators group.
• Do not switch users during the installation process.
If the following screen appears automatically, click Cancel to quit
the screen and turn off the printer. Next, remove the USB cable
connected to your computer. Then proceed from step 3 to install the
printer driver.
1
2
Ensure that the printer is turned off.
Turn on the computer and start
Windows. If any applications
automatically run, quit them.
Do NOT turn the printer on at this stage.
OFF
3
Place the Setup Software & User’s
Guide CD-ROM in the CD-ROM drive.
• If the Select Language screen appears, select a
language, then click Next
.
• If the Select Your Place of Residence screen
appears, select your place of residence, then click
Next
.
6
4
Follow the instructions displayed on the
screen. When the screen shown on the
left is displayed, click Easy Install.
• When you select Easy Install, the items included
in the CD-ROM are installed automatically.
To select only particular items to be installed,
click Custom Install and follow the instructions
on the screen.
• To install PhotoRecord, click Custom Install and
follow the instructions on the screen.
5
When the list of applications to install
appears, verify the contents, click
Install, and then follow the instructions
on the screen.
Move the cursor over items to display explanations of
each application below.
6
7
Read the License Agreement and click
Yes.
When the screen shown on the left
appears, connect the printer to the
computer with the USB cable.
7
8
9
Turn the printer on.
If the printer is recognized, the printer driver will be
automatically installed.
ON
Click Next.
When the Print Head Alignment Recommended
screen appears, click Next.
10 When the screen shown on the left
appears, click Exit.
If the screen shows a check box for restarting your
system, you can restart the system instead of just exiting
the program. To restart the system, ensure that the check
box is selected, and then click Restart
.
If ruled lines are displaced or the print result is
unsatisfactory, align the Print Head.
Refer to “Aligning the Print Head” in the User's Guide
.
• To view the On-screen Manual, double-click the iPXXXX On-screen Manual shortcut icon on the
desktop, or click Start and select All Programs (or Programs), Canon iPXXXX Manual and
iPXXXX On-screen Manual (XXXX represents 2200, 1600, or 1200).
• Microsoft Internet Explorer 5.0 or later must be installed to view the On-screen Manuals.
8
®
Installing the Printer Driver – Macintosh
• Do not remove or insert the USB cable during installation, as this may result in the computer or
printer not operating normally.
• Before installing the driver, disable all anti-virus programs and automatically loading programs.
1
Ensure that the printer is connected to
the computer.
2
3
Turn on the Mac.
Place the Setup Software & User’s
Guide CD-ROM in the CD-ROM drive.
If the CD-ROM does not run automatically, double-
click the CD-ROM icon on the desktop.
4
5
Double-click the Setup icon.
When the Authenticate screen
appears, enter your administrator name
and password, then click OK.
• If you do not know your administrator name or
password, click on the screen, then follow the
on-screen instructions.
• If the Select Language screen appears, select a
language, then click Next.
• If the Select Your Place of Residence screen
appears, select your place of residence and then click
Next
.
9
6
Follow the instructions displayed on the
screen. When the screen shown on the
left is displayed, click Easy Install.
When you select Easy Install, all the items included
in the CD-ROM are installed automatically.
To select only particular items to be installed, click
Custom Install and follow the instructions on the
screen.
7
8
When the list of applications to install
appears, verify the contents, click
Install and then follow the instructions
on the screen.
Move the cursor over items to display explanations of
each application below.
Read the License Agreement and click
Yes.
Some screen appears after clicking Yes. Read the
content shown on the screens and click Next.
10
9
When the screen shown on the left
appears, click Restart.
After restarting the computer, check that the printer
name you want to use is shown in Printer List. If the
printer name is not displayed, press Add to add the
printer.
For details, refer to the Printer Setup Utility Help in the
Mac Help.
If straight lines are misaligned or the print result is
unsatisfactory, align the Print Head.
Refer to “Aligning the Print Head” in the User’s Guide
.
• To view the On-screen Manual, double-click the iPXXXX On-screen Manual alias on the desktop
(XXXX represents 2200, 1600, or 1200).
• To install the User's Guide in other language than the installed one, double-click the Manual folder
in Setup Software & User's Guide CD-ROM, Canon folder, and then copy a language folder to
your hard disk.
11
Basic Operations
Adjusting the print settings according to your needs allows you to produce better quality prints.
• If you detect smoke, unusual smells or strange noises around the printer, immediately turn the printer
off and always unplug the printer. Contact your local Canon service representative.
• To avoid injury, never put your hand or fingers inside the printer while it is printing.
Printing with Windows
1
2
From your application’s File menu,
select Print.
Ensure that your printer is selected,
then click:
• Windows XP oPreferences
• Windows Me/Windows 98 o Properties
• Windows 2000 oMain tab
3
Specify the required settings and click
OK.
• For details about the printer driver, refer to the
Printer Driver Guide.
• Click Instructions to view the Printer Driver
Guide. If the On-screen Manual is not installed,
Instructions is not displayed.
4
To start printing, click Print.
Printing will start in a few moments.
12
Printing with Macintosh
1
From your application’s File menu,
select Page Setup.
2
3
4
Select your printer model in Format for.
Select the paper size to be used.
Specify the page setup, then click OK.
5
6
From your application’s File menu,
select Print.
Ensure that your printer model is
selected, then select Quality & Media
from the pop-up menu.
7
Specify the print settings according to
your requirements.
• For details about the printer driver, refer to the
Printer Driver Guide.
• Click
to view the Printer Driver Guide. If the
On-screen Manual is not installed, the Printer
Driver Guide is not displayed even if
clicked.
is
8
Click Print.
Printing will start in a few moments.
13
Replacing a FINE Cartridge
When the printer runs out of ink, replace the empty FINE Cartridge with a new one. Specify the
following FINE Cartridges when purchasing.
Black: PG-40
Color: CL-41
For iP2200, the FINE Cartridges PG-50 Black (High Yield) and CL-51 Color (High Yield) can be
installed as an option.
• When you use the iP2200 or iP1600
Be sure to use the iP2200 or iP1600 with both Black and Color FINE Cartridges (PG-40, CL-41).
Otherwise, the printer cannot print. When either of ink runs out while printing, you can select either
Color or Black ink as a printer driver setting. However you must use the printer with both Black
and Color FINE Cartridges loaded regardless of the printer driver setting.
• When you use the iP1200
The iP1200 is a model that can print only with a Color FINE Cartridge (CL-41).
By installing an optionally available Black FINE Cartridge (PG-40), the iP1200 can print using
both Black and Color inks just like the iP2200 and iP1600.
1
Open the Front Cover and remove the
empty FINE Cartridge.
Hereafter, follow the steps from step 4 in page 3 to install the new FINE Cartridge.
14
15
16
Regulatory Information
For 100-240V, 50/60Hz model
Color Printer Model: K10258, K10250
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
„ Reorient or relocate the receiving antenna.
„ Increase the separation between the equipment and receiver.
„ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
„ Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC
Rules.
Do not make any changes or modifications to the equipment unless otherwise specified in the
manual. If such changes or modifications should be made, you could be required to stop operation
of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
The following FINE Cartridges are compatible with the iP2200/iP1600/iP1200 printers.
PG-40 is optionally available for iP1200 printer.
The following FINE Cartridges (High Yield) are compatible with the iP2200 printer as an option.
For details on FINE Cartridge replacement, refer to "Replacing a FINE Cartridge" in this guide.
QA7-3559-V01
©CANON INC.2005
PRINTED IN VIETNAM
|