Sony Speaker 1287 2374 User Manual

User guide  
®
Bluetooth Speaker  
BSP10  
 
Introduction  
Function overview  
The BSP10 Bluetooth® Speaker accessory lets you enjoy high-quality audio and  
make conference calls both indoors and outdoors.  
Hardware overview  
1
2
3
4
5
6
7
8
9
Microphone  
Call button  
Bluetooth notification light  
NFC detection area  
Volume up button  
Volume down button  
Speaker  
Power button  
Power notification light/Cover for micro USB port  
Notification light status  
Flashing rapidly  
Pairing mode – The BSP10 accessory is ready to pair with an Xperia™ device  
Steady blue light The BSP10 accessory is paired with an Xperia™ device  
Steady white light Standby mode – The BSP10 accessory is ready to connect with a previously paired  
device  
3
This is an Internet version of this publication. © Print only for private use.  
 
Charging  
To charge your accessory  
There are two ways to charge your accessory:  
Place the BSP10 accessory on any wireless charging plate which supports the Qi  
inductive power standard.  
Using a USB cable, connect the BSP10 accessory to a power source.  
4
This is an Internet version of this publication. © Print only for private use.  
 
Getting started  
Preparing your accessory for use with an Xperia™ device  
Before you can use your BSP10 accessory with an Xperia™ device, for example, to  
play music or handle incoming calls, you must first pair the two devices. You can pair  
your BSP10 accessory with an Xperia™ device using either the Bluetooth® or NFC  
functions. Once the devices are paired, your BSP10 accessory automatically  
establishes a connection with the Xperia™ device.  
To pair the BSP10 with an Xperia™ device using NFC  
1
2
3
Xperia™ device: Make sure that the NFC function is turned on and that the  
screen is active and unlocked.  
BSP10: Press and hold down the power button until you hear a beep and a  
blue notification light flashes rapidly.  
Position your Xperia™ device in such a way that the NFC detection area of  
each device touches the other. When the BSP10 accessory is successfully  
paired with the Xperia™ device, the notification light turns solid blue.  
To pair the BSP10 with an Xperia™ device using Bluetooth®  
1
2
Xperia™ device: Make sure the Bluetooth® function is turned on.  
BSP10: Press and hold down the power button until you hear a beep and a  
blue notification light flashes rapidly.  
Xperia™ device: Search for and connect to the BSP10 accessory. When the  
accessory is successfully paired with the Xperia™ device, the notification light  
turns solid blue.  
3
To answer incoming calls with the BSP10  
1
2
Make sure the BSP10 accessory is connected with an Xperia™ device that  
supports call handling.  
When a call comes in, press  
.
The calling function is not supported for VoIP (Voice-over-Internet Protocol) calls.  
To listen to music with the BSP10  
1
2
Make sure the BSP10 accessory is connected with an Xperia™ device.  
Play an audio or video file on the Xperia™ device. The sound is automatically  
played through the speakers of the paired BSP10 accessory.  
5
This is an Internet version of this publication. © Print only for private use.  
 
Disconnecting and reconnecting  
Disconnection and reconnection methods  
There are several ways to disconnect your Xperia™ device from or reconnect it with  
your BSP10 accessory. You can only have one Xperia™ device connected with your  
accessory at any one time. To pair and connect with a second device, you must first  
disconnect the currently connected Xperia™ device.  
To disconnect a paired Xperia™ device from the BSP10  
Perform one of the following actions:  
On the Xperia™ device, deselect BSP10 in the list of paired Bluetooth® devices.  
Place the Xperia™ device over the BSP10 accessory so that the NFC detection area  
of each device touches the other. The accessory goes into pairing mode and the  
currently paired Xperia™ device gets disconnected.  
On the BSP10 accessory, short press the volume up and down buttons at the same  
time. The accessory goes into pairing mode and the currently paired Xperia™ device  
gets disconnected.  
To reconnect a previously paired Xperia™ device with the BSP10  
Perform one of the following actions:  
On the Xperia™ device, select BSP10 in the list of paired Bluetooth® devices.  
Place the previously paired Xperia™ device over the BSP10 accessory so that the  
NFC detection area of each device touches the other. The accessory goes into  
pairing mode and then reconnects automatically with the previously paired device.  
On the BSP10 accessory, short press the volume up and down buttons at the same  
time. The accessory goes into pairing mode and then reconnects automatically with  
the previously paired device.  
To stop an existing connection and connect with a different Xperia™ device  
1
2
Disconnect the currently paired Xperia™ device from the BSP10 accessory.  
Follow the relevant instructions to pair the other Xperia™ device with the  
BSP10 accessory using either NFC or Bluetooth.  
6
This is an Internet version of this publication. © Print only for private use.  
 
Troubleshooting  
I cannot answer a second call  
Make sure that your calling device supports the Bluetooth® Handsfree Profile (HFP).  
Make sure that the correct calling device is selected.  
The BSP10 accessory turns off unexpectedly  
If the BSP10 accessory beeps several times shortly before turning off, the battery  
level is low. Charge the battery.  
Unexpected behaviour  
When the BSP10 accessory is powered on, press the power button, then connect the  
USB charger cable to the BSP10 and remove the cable again almost immediately. No  
data loss is incurred using this recovery/reset method.  
When the BSP10 accessory is powered on, long press the call button. The BSP10  
restarts and all information about pairings with other devices gets removed.  
I can't pair a second device with my BSP10 accessory  
Disconnect the currently connected device from your BSP10 accessory, then pair the  
second device with the BSP10.  
No connection between BSP10 and an Xperia™ device  
Make sure that the BSP10 accessory is charged and within range of the device that  
you want to connect to. A maximum distance of 10 metres (33 feet), with no solid  
objects in between, is recommended.  
Disable the Bluetooth® function in the other Xperia™ device so that all connections  
are closed, then re-enable the Bluetooth® function and try to pair the BSP10  
accessory with the Xperia™ device again.  
7
This is an Internet version of this publication. © Print only for private use.  
 
Legal information  
SONY BSP10  
Prior to use, please read the Important information leaflet separately provided.  
This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any  
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of  
current information, or improvements to programs and/or equipment, may be made by Sony Mobile  
Communications Inc. at any time and without notice. Such changes will, however, be incorporated into new  
editions of this User guide.  
Do not place the BSP10 speaker near your ear when  
playing music or handling calls in order to avoid  
damage to your hearing. Also, to protect your  
hearing, it’s not recommended to listen to music  
with the BSP10 for more than 3 hours at a time.  
©Sony Mobile Communications Inc., 2014  
All rights reserved.  
Interoperability and compatibility among Bluetooth® devices varies. The device generally supports products  
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.  
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of Bluetooth  
(SIG) Inc. and is used under license. All other marks are the property of their respective owners. All rights  
reserved.  
All product and company names mentioned herein are the trademarks or registered trademarks of their  
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of  
their respective owners.  
Visit www.sonymobile.com for more information.  
All illustrations are for illustration only and may not accurately depict the actual accessory.  
Declaration of Conformity for BSP10  
We, Sony Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony type RD-0160  
and in combination with our accessories, to which this declaration relates is in  
conformity with the appropriate standards EN 300 328:V1.8.1, EN 300 330-2:V1.5.1,  
EN 301 489-7:V1.3.1, EN 301 489-17:V2.2.1, EN 301 489-3:V1.6.1 and EN 60 950-1:  
2006+A11:2009+A1:2010+A12:2011, EN 62 311:2008 following the provisions of,  
Radio Equipment and Telecommunication Terminal Equipment directive 1999/5/EC.  
Lund, July 2014  
Anders Grynge  
Director, Head of Global Type Approval  
We fulfil the requirements of the R&TTE Directive (1999/5/EC).  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful interference, and (2) This device must  
accept any interference received, including interference that may cause undesired operation.  
Any change or modification not expressly approved by Sony may void the user's authority to operate the  
equipment.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
8
This is an Internet version of this publication. © Print only for private use.  
 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation.  
If this equipment does cause harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
AVISO IMPORTANTE PARA MÉXICO  
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o  
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier  
interferencia, incluyendo la que pueda causar su operación no deseada.  
Para consultar la información relacionada al número del certificado, refiérase a la etiqueta del empaque y/o del  
producto.  
Alimentación: 5,0 Vcc  
Industry Canada Statement  
This device complies with RSS-210 of Industry Canada.  
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this  
device must accept any interference, including interference that may cause undesired operation of the device.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Avis d’industrie Canada  
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de  
licence.  
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,  
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est  
susceptible d'en compromettre le fonctionnement.  
9
This is an Internet version of this publication. © Print only for private use.  
 

Sharp DVD VCR Combo DV RW340U User Manual
Shop Vac Vacuum Cleaner 16RHT650C User Manual
Shure Musical Instrument SCM810 User Manual
Sierra Wireless Cell Phone 20070914 User Manual
Sunbeam Iron 121998 User Manual
Sunbeam Rice Cooker RC2300 User Manual
Sylvania CRT Television SRT2232X User Manual
Sylvania TV DVD Combo C6513DE User Manual
Talkswitch Telephone Accessories CTTS001021001 User Manual
Tanaka Trimmer TBC 225S User Manual