2002 SONY MOBILE
PRODUCT GUIDE
• 880W max power
• 40W x 4 + 150W x 1 into 4W, 20Hz-20kHz, @ 0.04% THD
• 60W x 4 + 180W x 1 into 2W, 20Hz-20kHz, @ 0.1% THD
• 120W x 2 + 150W x 1 into 4W
• MOSFET Outputs
• MOSFET Power Supply
• Input Channel Selector (Front/Front + Rear)
• Variable F+R 50-300Hz Hi Pass, Sub 50-300Hz
Low Pass Filter
• F+R RCA Inputs
XM-5150GSX
• Indicates step-up
5/3 Channel Amplifier
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
40 watts/150 watts per channel minimum continuous average power into
4 ohms, 5 channels driven from 50 Hz to 20 kHz/20 Hz to 300 Hz
(subwoofer) with no more than 0.04% total harmonic distortion per Car
Audio Ad Hoc Committee Standards.
Other Specifications
Circuit system
OTL (output transformerless) circuit
Pulse power supply
Inputs
RCA pin jacks
Outputs
Speaker terminals
Speaker impedance
Maximum outputs
Rated outputs (supply voltage at 14.4 V)
5 Speakers:
2 – 8 W (stereo) 4 – 8 W (when used as a bridging amplifier)
80 watts × 4 + 300 watts × 1 (at 4 W)
40 watts × 4 (50 Hz – 20 kHz, 0.04% THD, at 4 W)
+ 150 watts × 1 (20 – 300 Hz, 0.04% THD, at 4 W)
60 watts × 4 (50 Hz – 20 kHz, 0.1% THD, at 2 W) + 180 watts × 1
(20 – 300 Hz, 0.1% THD, at 2 W)
3 Speakers:
120 watts × 2 (50 Hz – 20 kHz, 0.1% THD, at 4 W)
+ 150 watts × 1 (20 – 300 Hz, 0.04% THD, at 4 W)
5 Hz – 50 kHz ( +0 dB, -3 dB)
0.005% or less (at 1 kHz, 4 W)
0.2 – 6.0 V (RCA pin jacks)
Frequency response
Harmonic distortion
Input level adjustment range
High-pass filter
50 – 300 Hz, –12 dB/oct
Low-pass filter
50 – 300 Hz, –12 dB/oct
Power requirements
Power supply voltage
Current drain
12 V DC car battery (negative ground)
10.5 – 16 V
at rated output: 42 A
Remote input: 1.0 mA
Dimensions
Approx. 358 × 50 × 264 mm (w/h/d) (14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Mass
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Mounting screws (4)
Supplied accessories
Design and Specifications subject to change without notice.
|