Owner's Manual
WARNING
Exercise can present a health
risk. Consult a physician
before beginning any exercise
program with this equipment.
If you feel faint or dizzy,
immediately discontinue use
of this equipment. Serious
bodily injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur if
all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
tightened prior to each use.
Follow all safety instructions in
this manual.
When calling for parts or
service, please specify the
following number.
40-0046A
STAMINA PRODUCTS
MADE IN CHINA
CAUTION:
Weight on this product should not exceed 250 lbs.
Product May Vary Slightly
From Pictured.
This Product is Produced Exclusively by
2040 N. Alliance, Springfield, MO 65803
Customer Service Number
1 (800) 375-7520
2007, 10
2007 Stamina Products, Inc.
CALL US FIRST
THANK YOU FOR PURCHASING THE
INSTRIDE PLUS STEPPER
To help you get started, we have pre-assembled most of your
INSTRIDE PLUS stepper at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts you will be getting your body into shape
and on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M. Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
BEFORE YOU BEGIN
Although Stamina constructs its products with the
finest materials and uses the highest standards of
manufacturing and quality control, there can
sometimes be missing parts or incorrectly sized
parts. If you have any questions or problems with
Thank you for choosing the INSTRIDE PLUS
stepper. We take great pride in producing this quality
product and hope it will provide many hours of quality
exercise to make you feel better, look better and enjoy
life to its fullest.
Yes, it's a proven fact that a regular exercise the parts included with your INSTRIDE PLUS
program can improve your physical and mental stepper, please do not return the product. Contact
health. Too often, our busy lifestyles limit our time us FIRST!
If a part is missing or defective, please call us toll
free at 1-800-375-7520 (in the U.S.). Our Customer
Service Staff is available to assist you from 7:30A.M.
to 5:00 P.M. (Central Time) Monday through Thursday
and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
If you would like to contact us online, go to our
Customer Service section.
and opportunity to exercise. The INSTRIDE PLUS
stepper provides a convenient and simple method to
begin your assault on getting your body in shape and
achieving a happier and healthier lifestyle.
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Read this manual carefully before using the
Be sure to have the name and model number of
the product available when you contact us.
INSTRIDE PLUS stepper.
Warning Label
Main Frame
Resistance Tube
Resistance Tube
Right Pedal Arm
Meter
Left Pedal Arm
Pedal Cap
Nut Cap
Bumper
Left Front Endcap
Shock
Rear Endcap
Main Frame
Shock Decal
(both sides)
Rear Endcap
4
EQUIPMENT WARNING & NOTICE LABELS
This chart is provided to help identify the warning & notice labels on the INSTRIDE PLUS Electronic
Stepper with Total Body Resistance Tubes. Please take a moment to familiarize yourself with all of the
warning & notice labels.
Labels are actual size
W1
WARNING LABEL(31)
D1
SHOCK DECAL(34)
(2 locations)
5
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at:
A.
COLLAR
Ring
B.
STEP 1
Lift up the LEFT and RIGHT PEDAL ARMS(2, 3). Insert the PULLEY BRACKET(7) into the Collar on the
MAIN FRAME(1). Wrap the CABLE(9) around the PULLEY(8) and press the two PEDAL ARMS(2, 3)
down. Refer to illustration A.
NOTE: Always make sure that the CABLE(9) is properly seated in the groove on the PULLEY(8) before
using the INSTRIDE PLUS stepper.
STEP 2
Refer to illustration B. Hook the RESISTANCE TUBES(32) onto the Rings in the LEFT and RIGHT PEDAL
ARMS(2, 3).
Install one AAA battery into the back of the METER(13), one battery included. Plug the SENSOR WIRE(11)
into the METER(13), then slide the METER(13) onto the MOUNTING CAP(12).
NOTE:
1. Please be careful not to damage the SENSOR WIRE(11) when attaching the METER(13).
2. See page 8 for detailed battery installation instructions.
6
SET UP INSTRUCTIONS
Place the INSTRIDE PLUS stepper in the area where it will be used. It is recommended that the INSTRIDE
PLUS stepper be placed on an equipment mat. The max. operation dimensions of INSTRIDE PLUS
stepper is approximately 17 3/8" long x 11 3/4" tall x 12 3/8" wide. (These dimensions may vary up to one
inch.) An area 6 feet wide x 6 feet long is required for safe operation of the INSTRIDE PLUS stepper.
Make sure that adequate space is available for access to and passage around the INSTRIDE PLUS
stepper.
LEVELING: Make sure the INSTRIDE PLUS stepper is set solidly on the floor with no rocking.
MOVING: Grasp the Front and Rear Stabilizers to move the INSTRIDE PLUS stepper. Do not use the
Pedal Arms to move the INSTRIDE PLUS stepper. The Pedal Arms will move and the
SHOCK(6) may pinch your hand or fingers.
FUNCTION INSPECTION
NOTE: Always make sure that the CABLE(9) is
properly seated in the groove on the PULLEY(8) before
using the INSTRIDE PLUS stepper.
Visually inspect the INSTRIDE PLUS stepper to
verify that assembly is as shown in the above
illustrations. Check the function of the INSTRIDE
PLUS stepper. Stand on the foot pedals and slowly
move your highest foot downward and follow the
natural path of the machine. The Shocks provide
resistance for your workout.
STORAGE
1. To store the INSTRIDE PLUS stepper simply keep it in a clean dry place.
2. The minimum dimensions of INSTRIDE PLUS stepper is approximately 17 3/8" long x 8 1/4" tall x 12 3/
8" wide. These dimensions will vary. Please measure your INSTRIDE PLUS stepper if exact dimensions
are needed.
3. Grasp the Front and Rear Frame to move the INSTRIDE PLUS stepper. Do not use the Pedal Arms to
move the INSTRIDE PLUS stepper.
4. To avoid damage to the electronics, remove the battery before storing the INSTRIDE PLUS stepper for
one year or more.
MAINTENANCE
The safety and integrity designed into the INSTRIDE PLUS stepper can only be maintained when the
INSTRIDE PLUS stepper is regularly examined for damage and wear. Special attention should be given to
the following:
1. Inspect the RESISTANCE TUBES(32) for nicks and cuts. Replace damaged RESISTANCE TUBES
(32).
2. Verify that the SHOCKS(6) provide resistance by pushing down on the foot pedals.
3. SHOCKS(6) on steppers get HOT during use. To avoid burns, do not touch the SHOCKS(6) until they
have time to cool.
4. Verify that the Warning Label is present and legible. Replace the Warning Label if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the INSTRIDE PLUS stepper removed
from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the INSTRIDE PLUS
stepper.
8. Keep your INSTRIDE PLUS stepper clean by wiping with an absorbent cloth after use.
7
OPERATIONAL INSTRUCTIONS
USING THE ELECTRONIC METER
Pedal movement or push any button.
POWER ON :
POWER OFF : Automatic shut off after four minutes of
inactivity.
FUNCTION BUTTONS:
MODE : Push to select the function of the lower
readout.
RESET : To reset all functions to zero.
FUNCTIONS:
Upper readout displays the total number of strides you have taken from zero to 9999
COUNT:
strides.
SCAN: Automatically scans each function of TIME, CALORIE, STRIDES/MIN in sequence with
change every five seconds.
TIME: Displays the riding time from one second up to 99:59 minutes.
STRIDES/MIN: Displays the rate of strides per minute.
CALORIE: Displays the calorie consumption from zero to 9999 Kcal.
The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
1.
The meter will stop counting time automatically after four seconds of inactivity. All function
values will be kept. Restart the meter by moving the pedals.
NOTE:
2. The meter will shut off automatically after four minutes of inactivity. All function values will
be kept. Press the RESET button to reset all functions to zero.
AAA Battery
HOW TO INSTALL AND REPLACE BATTERY:
1. Open the Battery Door on the back of the meter.
2. The meter operates with oneAAAbattery, one battery included. Refer
to the illustration to install or replace the battery.
NOTE:
1. Rechargeable batteries are not recommended.
8
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually, too, by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so
you don't tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below.
For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of
your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart
rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing
your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or three
fingers on your wrist and take a six second heartbeat count. Multiply the results
by ten to find your heart rate. For example, if your six second heartbeat count
is 14, your heart rate is 140 beats per minute. A six second count is used
wrist pulse
because your heart rate will drop rapidly when you stop exercising. Adjust the
intensity of your exercise until your heart rate is at the proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
*For cardiorespiratory training benefits, theAmerican College of Sports Medicine recommends working
out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart
rate, the following formula was used: 220 - Age = predicted maximum heart rate
9
WARM-UP and COOL-DOWN
Warm-up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm
up for two to five minutes before strength-training or aerobic exercising. Perform activities that raise your
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump
rope, and running in place
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength
or aerobic training session is very important. Muscles stretch more easily at these times because of their
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds.
Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessen, try a lower
position gradually.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to the
left leg. Do this stretch
several times slowly.
While sitting on the floor,
have legs apart one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Remember always to check with your physician before starting any exercise program.
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to
return to the heart. Your cool-down should include the stretches listed above and should be completed after
each strength-training session.
10
LIMITED WARRANTY
MODEL 40-0046A
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and one year on the
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household
purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield
Missouri, USA, 65801-1071 or call us at 1 (800) 375-7520. If the defect is covered under this limited
warranty, you will be requested to return the product or part to us for free repair or replacement at our option.
NO ACTION FOR BREACH OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER THE DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED.
NO ACTION FOR BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE
(1) YEAR AFTER DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not
transferable. IF ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED
WARRANTY OR ANY IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE
EXCLUSIVE REMEDY AVAILABLE TO YOU. In the event that the purchaser makes any claim under this
limited warranty or any implied warranty, the Warrantor reserves the right to require the product to be returned
for inspection, at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of
the enclosed warranty registration card is not required for warranty coverage, but is merely a way of
establishing the date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTALDAMAGESDUE TO BREACH OF THEABOVE WARRANTY ORANY IMPLIED
WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty
gives you specific legal rights, and you may also have other legal rights which vary from state to state.
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE
DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to
have been made to the extent necessary to comply with such legal restriction.
11
12
PARTS LIST
DIAGRAM#
PART NAME
QTY
1
2
3
4
5
6
7
8
Main Frame
Left Pedal Arm
Right Pedal Arm
Pedal Cap
Bumper
Shock
Pulley Bracket
Pulley
Cable
Magnet
Sensor Wire
Mounting Cap (60 x 60mm)
Meter
1
1
1
2
2
2
1
1
1
1
1
1
1
2
1
1
2
4
2
4
2
4
1
4
1
2
2
2
2
2
1
2
1
2
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Nut Cap (M8)
Left Front Endcap (30 x 60mm)
Right Front Endcap (30 x 60mm)
Rear Endcap (30 x 60mm)
Rectangular Plug (30 x 60mm)
Screw, Round Head (M3 x 10mm)
Bolt, Round Head (M6 x 1 x 38mm)
Bolt, Hex Head (M8 x 1.25 x 16mm)
Bolt, Hex Head (M8 x 1.25 x 38mm)
Bolt, Hex Head (3/8" - 16 x 1 9/16")
Nylock Nut (M8 x 1.25)
Nylock Nut (3/8" - 16)
Washer (M8)
Lock Washer (M8)
Thin Nylock Nut (3/8" - 16 x 1/4" thick)
Nylon Washer (3/8")
Nut Cap (3/8")
Warning Label
Resistance Tube
Manual
Shock Decal
13
NOTES
14
FAX/MAIL ORDERING FORM
Please do not return the product. For your convenience, Stamina has a Customer Service Department with
a toll-free number. Should a part be missing or a defective part found, please call 1 (800) 375-7520
(in the U.S.) from 7:30A.M. to 5:00 P.M. Central Time, Monday through Thursday and 8:00A.M. to 3:00 P.M.
on Friday or fill out the fax sheet ordering form below and fax it to (417) 889-8064. Our Customer Service
Department will be able to assist you with your problem and the part will be mailed directly to your house.
TELEPHONE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
FAX
ONLINE
MAIL
CUSTOMER SERVICE
Fax: (417) 889-8064
CUSTOMER SERVICE
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
Detach and Mail or Fax the Form Below
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms:
Address:
City:
Apt. #:
Zip Code:
State:
IMPORTANT: We must have your phone number in order to process the order!
Phone #: (
)
Work Phone #: (
)
Date Purchased:
Model #:
Purchased From:
IMPORTANT : Before filling out the form below make sure you have the right information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
1
DESCRIPTION
QUANTITY
1
EXAMPLE:
Rear Unit Assembly
|