StarTechcom Power Supply ATX2POWER400 User Manual

Reliable ATX 2.01 12V Power Supply  
400 Watt Reliable Power Supply  
ATX2POWER400  
Instruction Manual  
Actual product may vary from photo  
 
Instruction Manual  
Table of Contents  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Warranty Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
i
 
Instruction Manual  
Introduction  
Thank you for your purchase of a new StarTech.com power supply. All StarTech.com  
power supplies are manufactured with quality components and adherence to ATX  
specification standards. Your power supply is compatible with both Intel and AMD  
processors, comes with a generous number of connectors and is equipped with an  
automatic, 3-speed, temperature-controlled fan to keep the power supply quiet during low  
power demand.  
Features  
• ATX 2.01 compliant, including 2 12V power rails to deliver stable power to demanding  
devices; also includes a 20 pin ATX connector for compatibility with existing  
standards  
• 8cm fan provides superior airflow for increased reliability  
• Premium EMI/RFI power filtration provides low noise and ripple for stable power  
delivery  
• Quad+1 protection against: short circuit, over power, over voltage, no load, plus over  
current on both 12V rails  
• Built-in protection from short circuit, over power, over voltage and no-load situations  
to prevent power supply damage  
• Generous number of accessory connectors: 6 LP4, 2 SP4, 2 SATA, 4-pin Pentium 4  
and 6-pin PCI Express motherboard connectors  
• Braided sheath keeps motherboard cables tidy for improved airflow  
Before You Begin  
Contents  
This package should contain:  
• 1 x ATX2POWER400 power supply  
• 1 x Standard power cable  
• 1 x Instruction Manual  
1
 
Instruction Manual  
Installation  
CAUTION: Computers contain sensitive electronic components that are easily damaged  
by static electricity and excessive shock. When handling the power supply and other  
components, ensure you are properly grounded using an anti-static mat or similar device.  
If anti-static equipment is not available, ground yourself by touching the exterior of the  
computer case or another large metal surface before handling any peripherals.  
1. Installation of a power supply requires some mechanical skill and requires that you  
open your computer case to disconnect and reconnect wires. If you are unfamiliar with  
this kind of work, consider bringing your computer and new StarTech.com power  
supply to your local computer store for help.  
2. Check the red switch on the rear of the power supply, next to the power cord plug. Be  
sure it is set to the correct voltage for your country. In North America, it should read  
"115". In Europe and Australia it should read "230". To change the switch, use a  
screwdriver in the notch of the switch and slide it to the opposite side. If you are  
unsure of the voltage used in your country, contact your electricity provider before  
proceeding.  
3. If you are replacing an old power supply in your computer, ensure the computer is  
shut down and disconnect the power cord from the back of the old supply.  
4. Open your computer case. In most designs, the case is opened by removing two or  
three screws at the rear of the case and then sliding the covering panel backward until  
it comes free. If your case is a tower style, ensure that you remove the panel that will  
expose the top of the computer's motherboard. This is generally the left-side panel.  
There are many different case designs, however, so if you are unsure of how to open  
your particular case, consult the user manual for your case or contact your local  
computer store for help.  
5. With the computer case open, review the connectors being used from your old power  
supply. If you are building a new computer, review the connectors that you will need to  
use. Check the type of connector on your motherboard and use either the 24 or 20 pin  
ATX power connector on the power supply as appropriate.  
6. Disconnect the old power supply connections from inside your computer. Hard disk  
drive, CD drive and floppy disk drive connectors disconnect by pulling on the  
connector. The motherboard connector(s) have a clip that must be pressed while  
pulling on the connector to release them. A rocking motion while pulling will aid in  
getting the connectors loose. Never pull on the wires of a connector to unplug it.  
7. Check that all the wires from your old power supply are free. Remove the four screws  
on the rear of your old power supply to free it from the computer case. Support the  
power supply with one hand if it could fall while removing the last screw. (Such as in a  
tower style case.) Remove the power supply by sliding it back and then out through  
the side of your case.  
8. Install your new power supply by positioning it through the side or top of your case  
(depending on your case style) and then back onto the power supply mounts. Check  
that the orientation with the screw holes in your case is correct; all four holes must be  
aligned. Support the power supply with one hand while threading a mounting screw  
through the back of the case and into the power supply. The screw should thread  
smoothly and should not require effort. Do not force it or you could damage the  
2
 
Instruction Manual  
mounting holes. If the screw won't thread smoothly, remove it and check to ensure the  
mounting holes are correctly lined up. Repeat for the remaining three screws. Do not  
fully tighten any of the screws until they all have been threaded into their mounting  
holes. (Note: Consider Startech part SCREWTHUMB screws for easier installation.)  
9. Connect the motherboard and device power connectors as needed. This power supply  
has a TX3 connector to provide fan speed information if your motherboard supports  
this feature. It is not needed for the power supply to properly function if you can't or  
don't wish to use it.  
10. Tie unused wires away from fans and other moving parts.  
11. Replace the case cover and secure it. You may wish to not replace the screws until  
after you have checked that all connections are working.  
12. Toggle the rear power switch on power supply to off. (The "0" symbol on the switch.)  
Connect the power cord to the power supply and plug it in to a grounded power  
outlet. (The power supply MUST be connected to a grounded outlet.) Toggle the rear  
power switch to on.  
13. Start your computer. You should hear its fans and devices immediately begin to run.  
If you do not, toggle the rear switch on the power supply to off, disconnect the power  
cord, open the case and check that all connectors are well seated and secure.  
14. When you have confirmed all connections are working, replace the screws in your  
case.  
15. Power supplies contain electrical and electronic components and should be disposed  
of properly. If you replaced an old power supply follow your city's rules for proper  
disposal of electronic equipment.  
Specifications  
5.51 x 5.91 x 3.35 in. (14 x 15 x 8.5 cm) LxWxH  
4.1 lbs. (1.86 kg.) unboxed  
Dimensions/Weight  
Input Voltage  
115V (10A) or 230V (5.5A), 50/60 Hz (manual switching)  
400 Watts  
Output Power (max.)  
6 x LP4  
2 x SP4  
1 x ATX 24/20 pin (split connector)  
1 x 12V Pentium 4 Power  
2 x SATA Power  
1 x PCI Express  
1 x TX3 fan  
Connectors  
Fan  
8 cm, sleeve bearing  
Regulatory Approvals  
FCC, CSA, UL, TUV, CB  
DC Output  
+3.3V  
+5V  
28A  
+12V1  
14A  
+12V2  
15A  
-12V  
1A  
+5VSB  
2.5A  
30A  
3
 
Instruction Manual  
Technical Support  
StarTech.com’s lifetime technical support is an integral part of our commitment to provide  
industry-leading solutions. If you ever need help with your product, visit  
www.startech.com/support and access our comprehensive selection of online tools,  
documentation, and downloads.  
Warranty Information  
This product is backed by a two-year warranty. In addition, StarTech.com warrants its  
products against defects in materials and workmanship for the periods noted, following  
the initial date of purchase. During this period, the products may be returned for repair, or  
replacement with equivalent products at our discretion. The warranty covers parts and  
labor costs only. StarTech.com does not warrant its products from defects or damages  
arising from misuse, abuse, alteration, or normal wear and tear.  
Limitation of Liability  
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their  
officers, directors, employees or agents) for any damages (whether direct or indirect,  
special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business,  
or any pecuniary loss, arising out of or related to the use of the product exceed the  
actual price paid for the product.  
Some states do not allow the exclusion or limitation of incidental or consequential  
damages. If such laws apply, the limitations or exclusions contained in this statement  
may not apply to you.  
4
 
About StarTech.com  
StarTech.com is “The Professionals’ Source for Hard-to-Find Computer  
Parts”. Since 1985, we have been providing IT professionals with the  
quality products they need to complete their solutions. We offer an  
unmatched selection of computer parts, cables, server management  
solutions and A/V products and serve a worldwide market through our  
locations in the United States, Canada, the United Kingdom and Taiwan.  
Visit www.startech.com for complete information about all our products  
and to access exclusive interactive tools such as the Parts Finder and the  
KVM Reference Guide. StarTech.com makes it easy to complete almost  
any IT solution. Find out for yourself why our products lead the industry in  
performance, support, and value.  
Revised: 10 May 2005 (Rev. A)  
 

Sharp Cash Register XE A212 User Manual
Sharp Flat Panel Television LC 26GD4U User Manual
SIIG Computer Hardware 04 0343C User Manual
Snapper Snow Blower 3201 Series User Manual
Sony Digital Camera CMR PC1 USB User Manual
Sony DVD Player S9000ES User Manual
Sony Ericsson VCR NSP 1 User Manual
Sony Home Theater System 4 181 486 112 User Manual
Sylvania Portable CD Player SRCD3050 User Manual
Tangent DVD Player D 101 User Manual