Product Information Bulletin
®
DULUX DT/E/C
4-Pin Amalgam Compact Fluorescent Lamps
• Improved high temperature performance
– Maintains 90% lumens from 60°F to 175°F
ambient
• Latest generation higher temperature rated
composite (metal/plastic) base cap
• Designed to exceed IEC safety requirements*
• Extended range of color temperatures:
3500K, 4100K and 5000K with improved
color consistency
• Operates on various ballast systems
– Flicker free start on electronic ballasts
– Compatible with QUICKTRONIC® System CF
• Less power consumption than incandescent of
comparable light output
• High luminous efficacy
• Long 12,000 hour average rated life
– Reduces relamping requirement and
related cost
• Rare earth tri-phosphor with 82 CRI
SYLVANIA DULUX DT/E/C industry exclusive amalgam compact
fluorescent lamp is ideal for use in a wide range of high
temperature applications.
* Regulations may vary. Check your local and state regulations.
DULUX DT/E/C amalgam lamps are ideal for enclosed, exterior
and small fixtures. The lamps have improved amalgam
technology and higher temperature rated components. This
lamp has the next generation composite (metal/plastic) base cap
which has been designed to exceed IEC safety requirements.
Product Availability
Lamp
Wattage
Rated Lumens
CF42 DT/E/C
42
3200
System Comparison
Compact Fluorescent vs Incandescent
1
Rated
Lamp Life
System
Lumens
System
Wattage
System
LPW
Energy
Lamp Type
Savings
150W Incandescent
DULUX DT/E/C
750 hrs.
12,000 hrs.
2740
3200
150W
46W
18.5
70
–
$124.00
1. Based on $.10/kWh over 12,000 hours.
Application Information
Applications
Application Notes
Recessed ceiling fixtures, enclosed exterior fixtures
Industrial lighting
1. 4-Pin lamps designed for electronic ballast operation.
Not recommended for dimming.
2. Recommended for use with ballasts that operate the lamp
in compliance with ANSI/IEC specifications.
Showcase lighting
Wall sconces
Task lighting
Exit signs
Garden and walkway lighting
3. Minimum starting temperature depends on ballast.
4. Rule of thumb: to estimate the appropriate compact fluorescent
lamp wattage, divide the incandescent wattage by 4.
5. Equipment manufacturers are advised to consult ANSI and
IEC standards for the maximum allowable dimensions and
temperature to ensure compatibility with similar products.
Fixtures
Contact your local fixture agent for available fixtures.
Ballast Information
Contact your OSRAM SYLVANIA representative for a list
of compatible operating systems.
CF045R1 3/08
|