Symphonic Flat Panel Television STL1504 User Manual

FUNAI CORPORATION  
LIMITED WARRANTY  
Owner’s  
Manual  
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:  
LCD TELEVISION  
DURATION :  
PARTS :  
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of origi-  
nal retail purchase. Certain parts and LCD image burn-in are not covered under this warranty.  
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original  
retail purchase.  
STL1504  
(15 INCH Photo Stand Type)  
LABOR :  
FEATURES  
LIMITS AND EXCLUSIONS :  
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT  
OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE  
PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.  
MTS/SAP Tuner  
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.  
This warranty shall not be extended to any other person or transferee.  
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-  
ing system provides free and easy channel selection and lets you tune directly to any channel  
using the channel number buttons (0~9 and +100-key) on the remote control.  
On-Screen Function Display  
Full-Function Remote Control  
Sleep Timer  
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,  
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.  
Auto Shut Off Function- If there is no signal input from the antenna terminal and no user  
operation for 15 minutes, the TV will turn itself off automatically.  
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.  
S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS  
VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras.  
Component Input  
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or  
if service was attempted by AUTHORIZED SERVICE FACILITY. This FUNAI CORPORATION Limited warranty  
does not apply to any the product not purchased and used in CANADA.  
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does  
not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not sup-  
plied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alter-  
ation, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or  
damage which results from fire, flood, lightning or other acts of God.  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE  
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY  
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE  
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL  
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF  
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN  
CANADA.  
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE  
FACILITY.  
PRECAUTIONS  
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE  
FACILITY.  
Place your TV in a room with adequate ventilation.  
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.  
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS  
COSTS WILL BE CHARGED.  
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.  
Do not place your TV on soft surfaces, such as rugs or blankets.  
Leave enough room for air to circulate around the bottom, top and back of the set.  
ATTENTION :  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR  
The serial number of this product may be found on the back of the TV. No others have the same  
serial number as yours. You should record the number and other vital information here and retain  
this book as a permanent record of your purchase to aid identification in case of theft.  
NOTICE.  
To locate your nearest AUTHORIZED SERVICE FACILITY or general service procedure, please contact to us:  
Date of Purchase  
Dealer Purchase from  
Dealer Address  
Dealer Phone No.  
Model No.  
Serial No.  
FUNAI CORPORATION  
Customer Service  
Tel: 1-800-242-7158  
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING  
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE  
1-800-242-7158, OR VISIT OUR WEB SITE AT http://www.funai-corp.com  
0EMN02395  
Printed in China  
L0202CC * * * * *  
PHOTO STAND  
Photo Stand  
Adjust the length of the stand in 2 types (long or short)  
to change the angle of TV.  
CONNECTIONS  
Note to CATV system installer:  
VHF  
CAUTION: TO PREVENT ELEC-  
TRIC SHOCK, MATCH WIDE  
BLADE OF PLUG TO WIDE  
This reminder is provided to call the CATV system installer's attention to Article 820-  
40 of the NEC that provides guidelines for proper grounding and, in particular, speci-  
fies that the cable ground shall be connected to the grounding system of the building as  
Antenna  
(Not supplied)  
UHF  
SLOT, FULLY INSERT.  
AV-IN2  
close to the point of cable entry as practical.  
R
AUDIO  
L
Antenna  
COMPONENT  
Y
(Not supplied)  
Pb  
Pr  
FCC WARNING- This equipment may  
generate or use radio frequency energy.  
Changes or modifications to this equip-  
ment may cause harmful interference  
unless the modifications are expressly  
approved in the instruction manual.  
The user could lose the authority to  
operate this equipment if an unautho-  
rized change or modification is made.  
R
L
*Some cable TV systems use scrambled signals  
and require a special converter to receive these  
channels. Consult your local cable company.  
AUDIO  
AV-IN1  
VIDEO  
S-VIDEO  
CATV Box *  
or Satellite Box  
(Not supplied)  
ANT  
HEAD PHONE  
You can bracket this product  
as wall mounting TV using  
the arm adapted for 100mm  
(commercially available).  
VHF/UHF Combiner  
(Not supplied)  
OUT  
IN  
From Cable  
VHF/UHF  
Combination  
Antenna  
System or Satellite  
Antenna 75-ohm  
Coaxial Cable  
75-ohm  
Coaxial Cable  
ANT  
(Not supplied)  
OR  
OR  
From Cable System  
RF Cable (Not supplied)  
CLOSED CAPTION  
This TV can receive C1 and C2 Caption and Text.  
Notes:  
1) When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a  
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or  
text.  
CAPTION MODE  
1) Closed Caption Characters can be displayed on the TV screen only when the received broad-  
cast signal contains Caption Signals.  
2) Paint-on mode: Displays input characters on the screen immediately.  
Pop-on mode: Once characters are stored in memory, they are displayed all at once.  
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)  
Note: If [CAPTION1] or [CAPTION2] is selected but a Closed Caption signal is not included,  
characters will not be displayed.  
2) Captions and texts may not match the TV voice exactly.  
3) Interference may cause the closed caption system not to function properly.  
4) The caption or text characters will not be displayed while the menu display or functions dis-  
play is shown.  
5) If you see this screen:  
TEXT MODE  
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To  
clear screen, select [CAPTION1], [CAPTION2] or [OFF].  
1) Displays the text on the screen by scrolling (max. 7 lines)  
2) If the received broadcast signal does not contain caption or text signals, no change will occur.  
 
PREPARATION FOR USE  
[ADD/DELETE FUNCTION]  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the CH(annel) or button to point to "CHANNEL SET UP".  
LANGUAGE SELECTION  
If you want to change the language of the on-screen menu,  
follow the procedure below.  
1) Connect the power cord to a standard AC outlet.  
Note: If some digits appear in the corner of the screen,  
press the POWER button without unplugging the power cord.  
2) Press the POWER button to turn on the TV.  
3) Press the MENU button so that the menu display appears  
on the TV screen.  
- TV SET UP -  
- TV SET UP -  
Then press the VOL(ume) button.  
m
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
3) Press the VOL(ume) button so that "ADD/DELETE CH" is selected.  
m
LANGUAGE  
CAPTION  
[ENGLISH]  
LANGUAGE  
CAPTION  
[ENGLISH]  
[OFF]  
4) Use the CH(annel) or button to select the channel you wish to put  
[OFF]  
TV SOUND  
[MAIN]  
TV SOUND  
[MAIN]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
into memory or to erase from memory.  
Perform "ADD/DELETE CH" function while this display appears on the  
screen.  
- CHANNEL SET UP -  
ADD/DELETE CH (TV)  
AUTO PRESET CH  
- TV SET UP -  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
Press the VOL(ume) button to light up the channel number  
m
4) Press the CH(annel) or button to point to "LANGUAGE".  
5) Select [ENGLISH], [ESPAÑOL] or [FRANÇAIS]  
in LIGHT BLUE if you wish to add the channel into memory.  
LANGUAGE  
CAPTION  
[ENGLISH]  
[OFF]  
Press the VOL(ume) button to light up the channel number  
m
TV SOUND  
[MAIN]  
BACK LIGHT [BRIGHT]  
by using the VOL(ume) or button.  
n
m
in LIGHT RED if you wish to erase the channel from memory.  
5) Press the MENU button to exit the menu.  
6) Press the MENU button to exit the menu.  
CHANNEL PRESETTING  
MTS (Multi-Channel Television Sound) SYSTEM  
You can listen to a program in MTS stereo by following the steps below.  
Menu  
To preset a channel or to change a preset channel, follow the procedure below.  
1) Press the POWER button to turn on the TV.  
2) Press the MENU button so that the menu display appears on the TV  
screen.  
- TV SET UP -  
To show the status, press the  
Selection  
MAIN  
MONO  
SAP  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
Type of  
DISPLAY button on the remote  
control.  
broadcast  
3) Press the CH(annel) or button to point to "CHANNEL SET UP".  
LANGUAGE  
CAPTION  
[ENGLISH]  
[OFF]  
-None-  
-None-  
MONO  
MAIN  
-None-  
Regular  
Then press the VOL(ume) button.  
m
TV SOUND  
[MAIN]  
SAP: Second Audio Program,  
which means your program, can  
also be received in a second lan-  
guage or sometimes a radio station.  
BACK LIGHT [BRIGHT]  
4) Press the CH(annel) or button to point to "AUTO PRESET CH".  
Stereo  
STEREO  
STEREO  
broadcast  
Then press the VOL(ume) button.  
m
- CHANNEL SET UP -  
ADD/DELETE CH (TV)  
AUTO PRESET CH  
MAIN  
SAP  
SAP  
The tuner scans and memorizes all active channels in your area.  
The TV distinguishes between standard TV channels and cable (CATV)  
channels.  
[To Select STEREO, MONO or SAP in Stereo broadcast]  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the CH(annel) or button to point to "TV SOUND".  
When AUTO PRESET CH action is completed, the lowest memorized  
channel reappears on the screen. When there is no signal to ANT in jack,  
"NO TV SIGNALS" will appears. In this case, please check the antenna connections, then try  
again the auto preset channel.  
3) Press the VOL(ume) or button to select your desired stereo mode.  
n
m
([MAIN], [MONO] or [SAP])  
When you press the CH(annel) or button after selecting AUTO PRESET CH,  
the tuner will stop at the memorized channels only.  
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If  
this happens, try the AUTO PRESET CH action again when reception conditions are better.  
: Press the VOL(ume) or button.  
n
m
- TV SET UP -  
- TV SET UP -  
- TV SET UP -  
PICTURE  
PICTURE  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
CHANNEL SET UP  
V-CHIP SET UP  
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
LANGUAGE  
CAPTION  
[ENGLISH]  
[OFF]  
[MAIN]  
[OFF]  
[OFF]  
[SAP]  
[MONO]  
TV SOUND  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
OPERATIONS  
WATCHING A TV PROGRAM  
1) Press the POWER button to turn on the TV.  
2) Select the desired channel with the CH(annel) or button.  
3) Adjust the volume to the desired listening level using the VOL(ume) or button.  
PICTURE ADJUSTMENT  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) or button to  
point “PICTURE”. Then press the  
VOL(ume)  
VOL(ume)  
n
m
to decrease  
brightness  
to increase  
brightness  
BRIGHTNESS  
CONTRAST  
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)  
VOL(ume) button.  
m
to decrease  
contrast  
to increase  
contrast  
3) Select the feature you wish to adjust with  
SETTING THE SLEEP TIMER  
the CH(annel) or button and adjust it  
COLOR  
to pale  
to purple  
to soft  
to brilliant  
to green  
to clear  
The sleep timer function allows you to have the POWER automatically turn  
off after a set time period.  
1) Press the POWER button to turn on the TV and press the SLEEP button  
on the remote control .  
with the VOL(ume) or button.  
n
m
TINT  
: Press the CH(annel) or button.  
SHARPNESS  
2) You may change the sleep time by pressing the SLEEP  
SLEEP 10 MINUTE  
button on the remote control repeatedly. The timer can be set up to 90  
minutes. 10 minutes each time the SLEEP button is  
pressed. (The timer display counts up and sleep timer  
will be displayed on the screen when you press the  
SLEEP button on remote control.)  
To cancel the sleep timer:  
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
+
SHARPNESS  
-
-
+
-
+
-
+
-
+
Press the SLEEP button repeated-  
ly until "SLEEP 0 MINUTE" is  
displayed.  
Note:  
Note: When you disconnect the unit from the AC outlet or when you have a power failure, the  
In the above steps, the picture adjustment display will disappear from the TV screen automati-  
cally after about 10 seconds if you do not press any buttons. Press the MENU and VOL(ume)  
sleep time will be lost.  
button so that "PICTURE" is selected. Then press the CH(annel) or button repeatedly  
m
until the display returns to the screen.  
CLOSED CAPTION SELECTION  
You may view specially labeled (cc) TV pro-  
grams, movies, news and prerecorded tapes,  
etc. with either a dialogue caption or text dis-  
play added to the program.  
1) Press the MENU button so that the menu  
display appears on the TV screen.  
2) Press the CH(annel) or button to point  
to "CAPTION".  
BACK LIGHT SELECTION  
1) Press the MENU button so that the menu display appears on the TV screen.  
2) Press the CH(annel) or button to point to "BACK LIGHT".  
3) Press the VOL(ume) or button to  
n
m
select the mode you wish.  
3) Press the VOL(ume) or button to select the mode you wish.  
n
m
4) When done, press the MENU button to exit  
the menu.  
4) When done, press the MENU button to exit the menu.  
: Press the VOL(ume) or button.  
n
m
: Press the VOL(ume) or button.  
n
m
- TV SET UP -  
- TV SET UP -  
- TV SET UP -  
- TV SET UP -  
- TV SET UP -  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
PICTURE  
- TV SET UP -  
- TV SET UP -  
- TV SET UP -  
CHANNEL SET UP  
V-CHIP SET UP  
CHANNEL SET UP  
V-CHIP SET UP  
CHANNEL SET UP  
V-CHIP SET UP  
CHANNEL SET UP  
V-CHIP SET UP  
CHANNEL SET UP  
V-CHIP SET UP  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
CAPTION1  
[MAIN]  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
CAPTION2  
[MAIN]  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
LANGUAGE  
CAPTION  
TV SOUND  
[ENGLISH]  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
[OFF]  
[MAIN]  
[
]
[
]
[TEXT1]  
[MAIN]  
[TEXT2]  
[MAIN]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [BRIGHT]  
LANGUAGE  
CAPTION  
[ENGLISH]  
LANGUAGE  
CAPTION  
[ENGLISH]  
LANGUAGE  
CAPTION  
[ENGLISH]  
[OFF]  
[OFF]  
[OFF]  
TV SOUND  
[MAIN]  
TV SOUND  
[MAIN]  
TV SOUND  
[MAIN]  
BACK LIGHT [BRIGHT]  
BACK LIGHT [NORMAL]  
BACK LIGHT [DARK]  
 
OPERATIONS (Continued)  
[TV RATING SET UP]  
1) Press the MENU button so that the menu display appears on the TV screen.  
V-CHIP SET UP  
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.  
V-CHIP reads the ratings for programming (except for news and sports programs, unedited  
movies on premium cable channels, and Emergency Broadcast System signals), then denies access  
to programming if the program's rating meets or exceeds the limitations you select. In this case,  
"PROTECTED PROGRAM by ..." message appears on the TV screen.  
2) Press the CH(annel) or button to point to "V-CHIP SET UP".  
Then press the VOL(ume) button.  
3) Press the CH(annel) or button to point to "TV RATING". Then  
- V-CHIP SET UP -  
m
TV RATING  
MPAA RATING  
press the VOL(ume) button.  
m
4) Press the CH(annel) or button to point to your desired item.  
To block certain ratings, follow the steps below.  
Then press the VOL(ume) button to select [BLOCK] or [VIEW].  
m
Programming may be rated by the Motion Picture Association of America (MPAA) or accord-  
ing to the Television Parental Guidelines. In order to block any inappropriate programming, set  
your limits in both places (MPAA RATING and TV RATING).  
You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In  
this case, change to an unblocked channel, then press the MENU button.  
B
TV-Y  
TV-Y7(  
TV-G  
TV-PG(  
TV-14(  
TV-MA(  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
<Selection>  
<Rating Category Explanations>  
Appropriate for all children  
Appropriate for children seven and older  
General Audience  
)
• TV-Y :  
)
• TV-Y7 :  
• TV-G :  
)
)
• TV-PG :  
• TV-14 :  
• TV-MA :  
Parental Guidance suggested.  
Unsuitable for children under 14  
Mature audience only  
[MPAA RATING SET UP]  
1) Press the MENU button so that the menu display appears on the TV  
screen.  
- TV SET UP -  
PICTURE  
CHANNEL SET UP  
V-CHIP SET UP  
When you select the rating category and set it to [BLOCK], the higher rating will change to  
[BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.  
When you set "TV-Y" to [BLOCK] or [VIEW], then all ratings will change to [BLOCK] or  
[VIEW] automatically.  
2) Press the CH(annel) or button to point to "V-CHIP SET UP".  
LANGUAGE  
CAPTION  
[ENGLISH]  
[OFF]  
Then press the VOL(ume) button.  
TV SOUND  
[MAIN]  
m
BACK LIGHT [BRIGHT]  
3) Press the CH(annel) or button to point to "MPAA RATING".  
When you set "TV-MA" to [VIEW], then all ratings will change to [VIEW] automatically.  
Then press the VOL(ume) button.  
- V-CHIP SET UP -  
m
5) Press the MENU button to exit the menu.  
TV RATING  
MPAA RATING  
4) Press the CH(annel) or button to point to your desired item.  
Then press the VOL(ume) button to select [BLOCK] or [VIEW].  
m
[V-CHIP SET UP SUB RATINGS]  
When you select TV-Y7, TV-PG, TV-14 or TV-MA and you press the VOL(ume) button, the  
sub-ratings will appear on the TV screen.  
If you select the rating category (example: TV-PG) and set it to [BLOCK] or [VIEW], the sub-rat-  
ings (example: V for Violence) will change to [BLOCK] or [VIEW] auto-  
matically.  
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the  
rating category is set to [BLOCK]. To set the sub-ratings individually, fol-  
low the steps below.  
<Selection>  
• G :  
<Rating Category Explanations>  
General Audience  
m
• PG :  
• PG-13 :  
• R :  
Parental Guidance suggested.  
Unsuitable for children under 13  
Restricted; under 17 requires accompanying parent  
or adult guardian  
B G  
PG  
PG-13  
R
NC-17  
X
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
[VIEW]  
TV-Y7  
FV  
[BLOCK]  
[BLOCK]  
• NC-17 :  
• X :  
No one under 17 admitted  
Mature audience only  
B
When you select the rating category and set it to [BLOCK], then higher rating will change to  
[BLOCK] automatically. Also, the lower rating will change to [VIEW] automatically.  
When you set "G" to [BLOCK] or [VIEW], then all ratings will change to [BLOCK] or  
[VIEW] automatically.  
When you select [TV-Y7]:  
TV-Y  
TV-Y7(  
TV-G  
TV-PG(DLSV)  
TV-14 (DLSV)  
TV-MA( LSV)  
[VIEW]  
[VIEW]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
Press the CH(annel) or button to select "FV" (Fantasy Violence).  
)
B
Then press the VOL(ume) button to select [BLOCK] or [VIEW].  
m
When you select [TV-PG], [TV-14] or [TV-MA]:  
When you set "X" to [VIEW], then all ratings will change to [VIEW] automatically.  
[BLOCK]  
Press the CH(annel) or button to select "D" (Suggestive Dialog),  
"L"(Coarse Language), "S"(Sexual Situation) or "V" (Violence).  
5) Press the MENU button to exit the menu.  
TV-PG  
[BLOCK]  
Then press the VOL(ume) button to select [BLOCK] or [VIEW].  
m
Note: When you select [TV-MA], "D" does not appear on the TV screen.  
The sub-ratings which set to [BLOCK] appear next to the rating category  
in the TV RATING menu.  
D
L
S
V
[BLOCK]  
[BLOCK]  
[BLOCK]  
[BLOCK]  
TROUBLESHOOTING GUIDE  
MAINTENANCE  
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-  
looked possibilities. Before arranging for service, check these items. It could save your time and money.  
CABINET CLEANING  
Wipe the front panel and other exterior sur-  
PICTURE SCREEN CLEANING  
If the liquid crystal display panel should  
require cleaning, wipe it with a cotton or soft  
cloth. Before cleaning the picture screen, dis-  
connect the power cord.  
faces of the TV with a soft cloth immersed  
in lukewarm water and wrung dry.  
Never use a solvent or alcohol. Do not  
spray insecticide liquid near the TV. Such  
chemicals may cause damage and discol-  
oration to the exposed surfaces.  
QUICK SERVICE CHECK LIST  
POSSIBLE REMEDY  
SUPPLIED ACCESSORIES  
Try a new channel, if OK, then possible station trouble.  
Is TV plugged in?  
TV  
POWER  
INPUT  
S
E
L
E
C
T
D
I
S
P
L
A
Y
SLEEP  
1
4
7
2
5
8
0
3
6
9
Owner’s Manual  
(0EMN02395)  
Remote control unit  
(NE300UD)  
Power at outlet?  
Owner’s  
Manual  
MENU  
+100  
MUTE  
CH RETURN  
VOL  
CH  
Is TV’s POWER button on?  
Is antenna connected to terminal on the back of the set?  
If outside antenna is being used, check for broken wire.  
Check for local interference.  
Batteries ("AA" x 2)  
Turn off with POWER button and then turn it on after about a minute.  
Adjust COLOR control.  
Adjust CONTRAST & BRIGHT control.  
Check batteries in Remote Control.  
Move the TV away from the nearby appliances which have Magnetism.  
Turn off using the POWER button, then turn it on again 30 minutes or so later.  
Temperature around is too low.  
Life of the Back Light is approximately 50,000 hours. Ask the Service Center to replace.  
It is quality of the LCD Panel.  
SPECIFICATIONS  
GENERAL SPECIFICATIONS  
ELECTRICAL SPECIFICATIONS  
Television system:  
NTSC-M  
Sound output:  
1W, 8 ohm x 2  
TV Standard  
Closed Caption Problem  
Possible Remedy  
Closed Caption System: §15.119/FCC  
Channel coverage  
VHF:  
UHF:  
CATV:  
My TV is showing captions that are  
misspelled.  
You are watching a live broadcast and spelling errors made by the  
closed captioning production company may pass through uncorrect-  
ed. A prerecorded program will not show any misspelled words  
because of the normal time available for editing the captions.  
OTHER SPECIFICATIONS  
2 ~ 13  
14 ~ 69  
2 ~ 13, A ~ W,  
W+1 ~ W+84,  
A-5 ~ A-1, 5A  
181 channel  
frequency synthesized  
tuning system  
Direct access keyboard,  
programmable  
scan and up/down  
Remote control:  
Digital encoded  
infrared light system  
Operating temperature: 5°C to 40°C (41°F~104°F)  
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue  
Power requirements:  
Power consumption (Maximum): 38W  
LCD: 15"  
AC120V, 60Hz  
or there is a delay of what is being said.  
are common for live broadcasts. Most captioning production compa-  
nies can display a dialogue to a maximum of 220 words per minute.  
If a dialogue exceeds that rate, selective editing is used to insure that  
the captions remain up-to-date with the current TV screen dialogue.  
Tuning System:  
Channel access:  
Dimensions(H x W x D):  
Photo Stand open  
My captions are scrambled with white  
boxes on the TV screen.  
Interference caused by building, power lines, thunderstorms, etc.  
may cause scrambled or incomplete captions to appear.  
13-7/16"(341mm) x 15-3/16"(385mm) x 8-1/8"(206mm)  
Photo Stand close  
Terminals  
Antenna input:  
VHF/UHF/CATV  
75 ohm unbalanced  
(F-type)  
My program guide listed a TV show as  
being closed captioned  
but none of the captions were displayed.  
Broadcasters may at times use a time compression process to the  
actual program so that additional advertising time can be given.  
Since the decoder cannot read the compressed information, captions  
will be lost.  
14-5/16"(363mm) x 15-3/16"(385mm) x 3-1/8"(80mm)  
Weight:  
With Photo Stand: 7.3 lbs. (3.3kg)  
Without Photo Stand:6.8 lbs. (3.1kg)  
S-Video input:  
Video input:  
Audio input:  
Mini DIN 4-pin jack  
RCA connector  
RCA connector x 4  
My prerecorded videotape does not show  
any captions. The tape box mentions it  
being closed captioned.  
The videotape was either an illegal copying or the tape duplicating  
company accidentally left out the captioning signals during the  
copying process.  
Component video input:  
One pin jack (Y), 1Vpp (75 ohm)  
Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm)  
•Designs and specifications are subject to  
change without notice and without our  
legal obligation.  
•If there is a discrepancy between languages,  
the default language will be English.  
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION  
channels. [OFF].  
Headphone:  
1/8" Stereo (3.5 mm)  
Stereo Sound System  
2 speakers  
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active  
pixels may appear as a tiny spec of color. This in not to be considered a defect in the LCD screen.  
2 ways AV input  
 

Shark Iron GI468CN 10 User Manual
Sharp PDAs Smartphones SL 5500 User Manual
Sony Blu ray Player 4 135 656 111 User Manual
Sony Car Stereo System CDX GT500 User Manual
Sony Headphones MDR IF245RK User Manual
Sony Microcassette Recorder BM 21 User Manual
Stow Music Mixer cms 9 User Manual
SVA Flat Panel Television VR2008W User Manual
Swann Modem SW M SDE User Manual
Swann Webcam SW U WC20NA User Manual