Graco Thermometer 24T885 User Manual

Kit Instructions  
332653A  
300 psi LPG Gauge for ThermoLazer  
EN  
Model 24T885  
Important Safety Instructions  
Read instruction manual 3A1319 for complete instructions and warnings. This Kit is not  
a substitute for reading and understanding all instruction manuals and warning labels  
supplied with the equipment.  
1
6
11  
10  
14  
3
7
8
4
5
Ref. Part  
Description  
Qty.  
1
127257 GAUGE, pressure, 0-300 psi  
16W412 TUBE, formed, gas  
118484 FITTING, connector  
104984 FITTING, tee, pipe  
100030 BUSHING  
156971 FITTING, nipple, short  
100840 FITTING, elbow, street  
16W635 FITTING, system filter assembly  
108638 FITTING, pipe, tee  
070408 SEALANT, pipe, sst (not shown)  
110110 SEALANT, pipe, sst (not shown)  
555459 PLUG, 1/4 npt brass hex hd  
1
1
1
1
2
1
1
1
1
1
1
1
3
4
5
6
7
8
10  
11  
12  
13  
14  
 
Pressure Tap Installation for ThermoLazer  
Pressure Tap Installation for ThermoLazer  
1. Close manual gas shutoff valve on propane tank.  
9. Install new gas line (3) by screwing into gas safety  
valve adapter fitting (164) and screwing into adapter  
fitting (4). Screw in until gas tight.  
8
14  
5
164  
ti14128a  
ti22114a  
2. Disconnect gas supply hose (99) from propane tank.  
7
3
4
99  
10. Connect gas supply hose (99) to propane tank.  
99  
ti22097a  
3. Remove and discard existing gas line (3) by  
unscrewing from elbow fitting (161) and unscrewing  
from gas safety valve adapter fitting (164).  
ti14411b  
4. Remove and discard existing elbow fitting (161) by  
unscrewing from manual gas shutoff valve (9).  
11. Open manual gas shutoff valve on propane.  
164  
9
ti14127a  
ti22104a  
3
161  
12. Check gas lines for gas leaks (see ThermoLazer  
Operation Manual).  
5. Apply pipe sealant to elbow fitting (8) and screw into  
manual gas shutoff valve (9). Screw in until gas  
tight. Position fitting as shown.  
6. Apply pipe sealant to adapter fitting (7) and screw  
into tee fitting (11). Screw in until gas tight.  
7. Apply pipe sealant to adapter fitting (4) and screw  
into tee fitting (11). Screw in until gas tight.  
8. Apply pipe sealant to adapter fitting (7) and screw  
into elbow fitting (8). Screw in until gas tight. Posi-  
tion fittings as shown.  
332653A  
3
 
All written and visual data contained in this document reflects the latest product information available at the time of publication.  
Graco reserves the right to make changes at any time without notice.  
This manual contains English. MM 332653  
Graco Headquarters: Minneapolis  
International Offices: Belgium, China, Japan, Korea  
GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS MN 55440-1441 • USA  
Copyright 2012, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.  
Revision A - 2013  
 

Graco Crib PD224816C User Manual
Hamilton Beach Waffle Iron 26020 User Manual
HannsG Computer Monitor JG191A User Manual
HANNspree Flat Panel Television LT12 23U1 000 User Manual
Harbor Freight Tools Air Compressor 93874 User Manual
Hayter Mowers Lawn Mower 005C User Manual
Hearth and Home Technologies Indoor Fireplace SILH60EV User Manual
Hotpoint Oven OS 897D P IX HP User Manual
HP Hewlett Packard Personal Computer A1630n User Manual
Ice O Matic Ice Maker KBT15022 User Manual