Adjustable Drill
Press Support
MODEL H6238
Introduction
The Model H6238 Adjustable Drill Press Support
(Figure 1) provides stability and control for drilling
long workpieces.
The Model H6238 was carefully packed when
it left our warehouse. If you discover this unit
is damaged after you have signed for delivery,
please immediately call Customer Service at
(570) 546-9663 for advice.
Save the containers and all packing materials for
possible inspection by the carrier or its agent.
Otherwise, filing a freight claim can be difficult.
Figure 1. Adjustable Drill Press Support.
When you are completely satisfied with the condi-
tion of your shipment, you should inventory the
contents.
C
Inventory (Figure 2)
E
E
A. Column Clamp............................................ 1
B. Clamp Plate................................................ 1
C. Center Support........................................... 1
D. Extension Arms .......................................... 2
E. Roller Supports........................................... 2
F. Lock Knob M10-1.5.................................... 5
Clamp Hardware ..........................................
—Hex Bolts M8-1.25 x 100........................ 2
—Lock Nut M8-1.25 ................................... 1
—Wing Nut M8-1.25................................... 1
D
A
B
F
Figure 2. Inventory.
PARTS BREAKDOWN
REF PART #
DESCRIPTION
REF PART #
DESCRIPTION
1
2
3
4
5
PH6238001 CLAMP PLATE
PH6238002 COLUMN CLAMP
PH6238003 CENTER SUPPORT
PH6238004 EXTENSION ARM
PH6238005 ROLLER SUPPORT BRACKET
6
7
8
9
PH6238006 10" ROLLER
PB45M
PLN04M
PWN02M
HEX BOLT M8-1.25 X 100
LOCK NUT M8-1.25
WING NUT M8-1.25
10
PH6238010 LOCK KNOB M10-1.5
COPYRIGHT © AUGUST, 2004 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
#EW6462 PRINTED IN CHINA
|