Grizzly Outdoor Cart H3034 User Manual

LARGE WHEEL NURSERY  
PUSH CART  
MODEL H3034  
INSTRUCTION SHEET  
COPYRIGHT © JUNE, 2004 BY GRIZZLY INDUSTRIAL, INC.  
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE  
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.  
#CA6393 PRINTED IN CHINA  
 
ASSEMBLY INSTRUCTIONS  
4. Slide the handle through the handle housing  
When assembling the Model H3034, tighten all  
nuts and bolts finger tight, then, when the cart is  
assembled, tighten all nuts and bolts firmly.  
rings and fasten with M8-1.25 x 40 hex bolts,  
and lock nuts for the ends, and M8-1.25 x  
16 hex bolts for the threaded housing rings  
(Figure 4).  
FENCES, HANDLES, AND LEGS  
5. Place the support bar in the bracket on the  
base and bolt the ends to the legs with M8-  
1.25 x 40 hex bolts, flat washers and lock  
nuts (Figure 4).  
1. Bolt the fence sides to the inside of the base  
using the M8-1.25 x 30 hex bolts, flat wash-  
ers, lock washers, and hex nuts.  
2. Install the tailgate with the hinges facing out,  
using the M6-1 x 70 slotted screws and lock  
nuts as shown in Figure 3.  
6. Secure the support bar in the bracket with a  
M8-1.25 x 40 hex bolt, flat washer and lock  
nut (Figure 4).  
AXLE AND WHEELS  
1. With the cart upside down, place the axle  
through the axle housing on the bottom of the  
base.  
2. Place a wheel and a 20mm flat washer on  
each axle end.  
3. Insert and spread a cotter pin through each  
axle.  
If you need additional help with this procedure,  
call our service department at: (570) 546-9663.  
Figure 3. Tailgate hinges.  
3. Bolt the legs to the base (Figure 4) using M8-  
1.25 x 40 hex bolts, flat washers, and lock  
nuts. Bolt them to the sides using M8-1.25 x  
45 hex bolts, flat washers and lock nuts.  
Figure 4. Leg and handle installation.  
 
H3034 Parts Breakdown and List  
1
14, 17, 18  
13  
5
15, 17, 18  
14  
16, 17, 18  
3
6
4
14,17,18  
19, 20  
2
7
9
10  
11, 12  
REF  
1
PART#  
DESCRIPTION  
REF  
12  
13  
14  
15  
16  
17  
18  
19  
20  
PART#  
DESCRIPTION  
PH3034001 FENCE  
PH3034002 TAILGATE  
PH3034003 HANDLE  
PH3034012 COTTER PIN 4MM X 42MM  
PB03M  
PB15M  
PB26M  
PB118M  
PLN04M  
PW01M  
PS90M  
PLN03M  
HEX BOLT M8-1.25 X 16  
HEX BOLT M8-1.25 X 40  
HEX BOLT M8-1.25 X 30  
HEX BOLT M8-1.25 X 45  
LOCK NUT M8-1.25  
2
3
4
PH3034004 TAILGATE LATCH  
PH3034005 SUPPORT BAR  
PH3034006 BASE  
5
6
7
PH3034007 LEG  
FLAT WASHER 8MM  
PHLP HD SCR M6-1 X 70  
LOCK NUT M6-1  
9
PH3034009 WHEEL 26 X 2.125  
PH3034010 AXLE  
10  
11  
PW13M  
FLAT WASHER 20MM  
 

Grizzly Sander G5970 User Manual
Grizzly Saw G0651 User Manual
Hamilton Beach Gas Grill 31585 User Manual
Hamilton Beach Kitchen Grill 840100500 User Manual
Heatcraft Refrigeration Products Air Compressor H IM FP User Manual
Hotpoint Oven ST87EX User Manual
Hughes Radio Antenna AN4 074 DF User Manual
Hypercom Printer P10G 710001 002 User Manual
Hyundai Flat Panel Television 0090509536 User Manual
iLive Speaker System iHMD8816DT E1 User Manual