MODEL T10148
SWIVEL BASE
INSTRUCTIONS
Installation
For.easy.and.safe.base.installation,.attach.lifting.
straps.or.chains.to.the.vise.at.the.four.locations.
shown. in. figure 1, and. using. a. suitable. lifting.
apparatus,.raise.the.vise.
Your vise and swivel base are heavy! Get the
assistance of a second person or use a hoist
when lifting the vise and installing the swivel
base. Wear heavy duty leather boots for foot
and toe protection, and keep hands and fin-
gers away from all pinch points. Ignoring this
warning can lead to a severe crushing injury
or finger amputation!
T10148
Specifications
T-Bolt.and.Nut
Length.......................................................... 131⁄2
"
"
3
T10148.Swivel.Base
T10147.Hydraulic.Vise
Width............................................................12.⁄4
Overall.Height.(Pin.Tip.to.Base.Underside).. 27⁄16"
T-Bolt.Bolt.Pattern.(On.Center)...................... 73⁄4
"
Alignment.Dogs.Bolt.Pattern.(On.Center).......10"
Base.to.Table.Bolt.Pattern.(On.Center)...........12"
Replaceable.Spindle.Diameter................... 16mm
Surface.Parallelism.........................0.015/100mm
Alignment.Dog.Width................................. 16mm
Alignment.Dogs.......................................Included
T-Bolts.and.Nuts......................................Included
figure 1. Model.T10147.vise installed.on.the.
Model.T10148.base.
Block.the.vise.for.safety,.and.lubricate.the.base.
and.vise.mating.surfaces.with.white.lithium.grease..
Secure. the. base. and. vise. together. with. the. two.
T-bolts.and.nuts.
T-Bolt.Size.........................................1⁄2"-11.x.23⁄8
"
T-Bolt.Nut.Size............................................1⁄2"-11
360° Scale.................... Marked 0°-90° Every.90°.
Scale.Incrimination............................................1°.
Swivel.Base.Body................. Ductile.Iron.FCD60
Weight........................................................32.lbs.
Maintenance
Depending.on.type.of.cutting.fluids.used,.operat-
ing. environment,. and. frequency. of. use,. periodi-
cally.remove.the.swivel.base.from.the.vise..Clean.
all.mating.surfaces,.the.spindle,.and.the.bore.with.
mineral.spirits..Then,.re-lubricate.all.cleaned.sur-
faces.with.white.lithium.grease.and.reassemble.
If you need help with your new item, call our Tech
Support at: (570) 546-9663.
COPyRIgHT.©.JANUARy,.2009.By.gRIzzLy.INDUSTRIAL,.INC.
WARNING: NO pORTION Of ThIS MANUAL MAY BE REpRODUCED IN ANY ShApE
OR fORM WIThOUT ThE WRITTEN AppROVAL Of GRIzzLY INDUSTRIAL, INC.
.#CR11497..pRINTED IN TAIWAN
|