Grizzly Work Light G8586 User Manual

MODEL G8586  
PORTABLE CLAMPING  
WORKBENCH  
INSTRUCTIONS  
Introduction  
Assembly  
1. Attach the crossbars to the leg braces with (8)  
M6-1 x 40 Phillips head screws, hex nuts and  
(16) 6mm flat washers, as show in Figure 2.  
This workbench features four adjustable clamping  
dogs for securing flat work, independently adjust-  
able hand screws for irregular clamping, and fold-  
ing capability for convenient storage.  
Specifications  
Weight ......................................................18 lbs.  
1
Dimensions ...................... 31 /4"H x 24"W x 25"D  
Leg  
x 4  
x 4  
Clamping Capacity ........................................414  
Work Surface....................................... 24" x 912  
"
"
Inventory  
Qty  
A. Front Table Top.......................................... 1  
B. Rear Table Top .......................................... 1  
C. Table Brackets ........................................... 2  
D. Crossbars................................................... 2  
E. Leg Frames ................................................ 2  
F. Clamping Dogs........................................... 4  
G. Rubber Feet ............................................... 4  
H. Hardware Bag (not shown)  
Crossbar  
Figure 2. Crossbars and legs assembled.  
2. Press the release button on a table bracket  
(Figure 3), swing it open, then place the  
bracket on the bottom of the front table top.  
Position the handle on the side of the table  
top with the measuring scale.  
—Tap Screws 5 x 14mm...................... 16  
—Phillip Head Screws M6-1 x 40 .......... 8  
—Hex Nuts M6-1 ................................... 8  
—Flat Washers 6mm........................... 16  
—Hex Bolts M8-1.25 x 45...................... 4  
—Lock Nuts M8-1.25 ............................. 4  
—Flat Washers 8mm............................. 8  
Table Bracket  
x 4  
Release  
Button  
e
C
A
B
F
Handle  
G
Figure 3. Table bracket installed on bottom of  
front table top.  
D
3. Secure the table bracket to the front table top  
with (4) tap screws, as shown in Figure 3.  
Figure 1. Model G8586 inventory.  
CoPyRiGHT © MAy, 2008 By GRizzLy iNDuSTRiAL, iNC.  
WARNING: NO PORTION OF THIS MANUAL MAy BE REPRODUCED IN ANy SHAPE  
OR FORM WITHOUT THE WRITTEN APPROvAL OF GRIzzLy INDUSTRIAL, INC.  
#BL10763 PRiNTeD iN CHiNA  
 

Grizzly Blender G7153 User Manual
Grizzly Dust Collector G0548 User Manual
Grizzly Guitar H3122 User Manual
Guardian Technologies Vacuum Cleaner GGU300 User Manual
Harbor Freight Tools Electric Shaver 66342 User Manual
Hearth and Home Technologies Indoor Fireplace Columbia Bay User Manual
Honeywell Automobile Parts VBN2 User Manual
Hotpoint Washer Dryer WDUD 10760 User Manual
HP Hewlett Packard Digital Camera 320 Series User Manual
Husqvarna Chainsaw K760 User Manual