COLOR
TELEVISION
ELEGANCE 15 FLAT
TVD 40-2501 TEXT
DEUTSCH
ENGLISH
NEDERLANDS
ESPAÑOL
PORTUGUÊS
SET-UP AND SAFETY___________________________
Please note the following information when setting up your television set.
This television set is designed to receive and display video and audio signals.
Any other use is expressly prohibited.
5 x
AUDIO
L
TV/D
R
VD
V
ID
EO
PRG/V
OL
MENU
The ideal viewing distance is 5 times the screen diagonal.
External light falling on the screen impairs picture quality.
Ensure sufficient clearance between the TV and the wall cabinet.
10
cm
10
cm
The television set is designed for use in dry rooms. If you do use it in the
open, please ensure that it is protected from moisture, such as rain or
splashing water. Do not expose the television set to any moisture.
20 cm
20
cm
If the television is subject to sudden changes in temperature, for example if it
is brought in from the cold to a warm room, connect it to the mains supply
and let it stand for at least two hours before you insert a disc.
TV/DVD
PRG/VOL
MENU
Do not place any vessels such as vases on the television, as they may spill
liquid, thus presenting a safety risk.
olf
G
m
a
g
Place the television set on a solid, level surface. Do not place any objects
such as newspapers on the television set or cloth or similar items beneath it.
TV
PRG/VOL
Do not place the television set close to heating units or in direct sunlight, as
this will impair cooling.
Heat build-up can be dangerous and shortens the operating life of the tele-
vision set. For reasons of safety, have a specialist remove any dirt deposits in
the set from time to time.
Keep the television set away from magnetic fields (loudspeaker boxes, for
example).
TV/DVD
PRG/VOL
MENU
Do not open the television set under any circumstances. No warranty claims
are accepted for damage resulting from improper handling.
Ensure that the mains cable is not damaged.
Thunderstorms are a danger to all electrical devices. Even if the television set
is switched off, it can be damaged by a lightning strike to the mains or the
antenna cable. Always disconnect the mains and antenna plugs during a
storm.
VICE !
! SER
Do not insert foreign objects in the disc compartment.
If the device is unable to scan discs perfectly, use a standard, commercially
available cleaning CD to clean the laser optics. Other cleaning methods may
damage the laser optics.
Always keep the disc compartment closed to prevent dust from collecting on
the laser optics.
Clean the screen with a soft, damp cloth. Only use plain water.
3
CONNECTION AND PREPARATION__
Connecting the antenna and the mains cable
VIDEO A/L A/R
AV
COAXIAL
TV
R
1
2
1
2
Plug the antenna cable of the rooftop antenna into the »Ä« antenna
socket on the television.
Plug the mains cable into the wall socket.
Inserting batteries in the remote control
1
Open the battery compartment by removing the lid.
2
Insert batteries (micro type, e.g. LR 03 or AAA, 2 x 1.5 V).
Observe the polarity (marked on the base of the battery
compartment).
3
Close the battery compartment.
Note:
If the television no longer reacts properly to remote
control commands, the batteries may be flat. Be sure to
remove used batteries.
The manufacturer accepts no liability for damage result-
ing from leaking batteries.
Environmental note
Batteries, including those which contain no heavy metal,
may not be disposed of with household waste. Please
dispose of used batteries in an environmentally sound
manner. Find out about the legal regulations which apply
in your area.
4
OVERVIEW____________________________________________
The remote control
TV operation
Ǽ
Switches off the television set (stand-by).
TV
DVD
TV/DVD Switches the remote control from TV mode to
ZOOM
DVD mode and back.
PROGRAM
Switches between picture formats.
Reveal answer in teletext mode.
E
GO TO
DVD MENU
-/--
Switches between single- and double-digit preset
channels.
z
Switches to double character size in teletext mode.
1…0
Switch the television on from standby mode.
Select channels directly.
DVD SETUP
TITLE
TXT
AV
UPDATE
SUB
d
Sound on/off (mute).
d
i
Opens and closes the info menu;
closes all menus.
DVD
EXT.
VCR
SAT
Z
Zap function.
Page hold in teletext mode.
P+, P-
Switch the television on from standby.
Select channels step-by-step.
Tele Pilot 165 C
Move the cursor up and down.
OK
Calls up the station list.
Activates various functions.
Ǹ Ƿ
TXT
Move cursor to the left/right.
Switches between teletext and TV modes.
Hides the menu.
AV
Selects the AV channels and the most recently viewed
television channel.
–
+
Adjust the volume.
z
SUB
Selects sub-pages in teletext mode.
UPDATE Updates the page in teletext mode.
5
OVERVIEW____________________________________________
z
Selects a page in teletext mode.
Ȅ
Shows the time.
Selects a page in teletext mode.
TV
DVD
ZOOM
Ƿ
Selects a page in teletext mode.
Selects a page in teletext mode.
PROGRAM
F
VCR, SAT Switches to operating a GRUNDIG videorecorder,
DVD EXT. a GRUNDIG satellite receiver or a GRUNDIG
DVD player.
GO TO
DVD MENU
z
Keep the appropriate button (»VCR«, »SAT«, »DVD
EXT.«) pressed down. Then press the appropriate
button.
DVD SETUP
TITLE
TXT
AV
UPDATE
SUB
Note:
The functions available depend on the model of the
device you are using.
Just try it out.
d
DVD
EXT.
VCR
SAT
Tele Pilot 165 C
6
OVERVIEW____________________________________________
DVD mode
1…0
Numerical keys for various inputs.
TV/DVD
Switches the remote control from TV mode to DVD
mode and back.
TV
DVD
ZOOM
ZOOM
Zooms in/out on scenes during playback.
PROGRAM
PROGRAM For programming a playback list for the inserted
disc.
GO TO
DVD MENU
z
GO TO
Opens the info menu of DVD unit.
DVD
During playback, opens the disc menu* on a DVD.
MENU
DVD SETUP
TITLE
TXT
AV
P+, P-
Ǹ Ƿ
Select various functions in the menus.
UPDATE
SUB
d
OK
Confirms functions.
DVD
EXT.
VCR
SAT
DVD
Opens the main menu on the DVD unit.
SETUP
TITLE
Calls up the DVD title menu* during playback.
Tele Pilot 165 C
Switches to reverse frame search at various speeds
during playback.
3
Switches to forward frame search at various speeds
during playback.
4
7
Interrupts all drive functions.
Selects the previous title or section during playback.
5a
8!
Starts playback.
Freeze-frame for DVDs and video CDs.
Pause for audio CDs and MP3 CDs.
Selects the next title or section during playback.
* Depends on the DVD in use
s6
7
OVERVIEW____________________________________________
The front of the television set
TV/DVD
PRG/VOL
MENU
A
Ȃ
Switches the television into and out of standby mode.
Compartment for CD media.
A
TV/DVD
Switches the device from TV mode to DVD mode and back.
Interrupts all drive functions.
7
Selects the previous title or section during playback.
Selects various functions in the menus.
5a
8/!
Starts playback.
Freeze-frame for DVDs and video CDs.
Pause for audio CDs and MP3 CDs;
activates menu functions.
Selects the next title or section during playback.
Selects various functions in the menus.
s6
Opens and closes the disc compartment.
ə
Preset button for volume or channel selection.
Channel selection down.
Reduce volume.
PROG/VOL
–
Switches the television on from stand-by.
Channel selection up.
+
Increase volume.
MENU
Opens the TV menu, switches to the previous page in the
TV menu.
Opens the main menu of the DVD unit.
y
Headphone jack (3.5 mm ø jack plug).
Video signal input for camcorder.
VIDEO
R AUDIO L Audio signal input for camcorder.
8
SETTINGS
______________________________________________
Setting television channels automatically
The television set is equipped with an automatic channel search
system.
You start the search and can then sort the television channels into
your order of preference.
100 preset positions are provided, to which you can assign televisi-
on channels from the antenna or from the cable connection.
You can also delete television channels from the channel list which
were found more than once or which have poor reception.
1
Switch on the television with »
press »P+« on the remote control.
– The »Language« menu appears when the television is first
switched on.
Ȃ« on the television set, then
Language
English
Svenska
Dansk
Norsk
Suomi
Slovensko
Polski
Magyar
Pycckꢄꢄ
ꢅ¹1ꢆꢆꢆ
Romaneste
Hirvatski
âe‰tina
Slovenãina
G. Shqipe
ꢀꢁꢂꢃapckꢄ
Мaкедонски
Srpski
Deutsch
Francais
Italiano
Español
Portuguesa
Ellenika
Türkçe
Nederlands
Hint:
If the »Language« menu does not appear on the screen, then
set it in accordance with the chapter on resetting all television
channels on page 34.
ļ
OK
Select
ĵ
İ
Ł
Ļ
2
3
Select language with »P+«, »P-«, » « or » « and press
»OK« to confirm.
– The »Country Selection« menu appears.
Ǹ
Ƿ
Country Selection
Press »P+«, »P-«, » « or » « to select the country and
Ǹ
Ƿ
Arabic
Iran
Russia
»OK« to confirm.
Belgium
Bulgaria
âeska Rep.
Danmark
Deutschl.
Ellada
España
Franca
Hrvatska
Ireland
Italia
Magyar
Netherl.
Norge
Österreich
Polska
Portugal
Romania
Schweiz
Slovenija
Slovensko
Suomi
Sverige
Türkiye
U. K.
Note:
If your country is not displayed, select ». . . . . . . «.
4
Press »OK« to start the search.
Yugoslavia
. . . . . . . .
– The »Setup« menu appears and the search begins. The auto-
matic search may last several minutes depending on the num-
ber of television channels received.
ļ
OK
Select
ĵ
İ
Ł
Exit
i
G
Ļ
– After the search, the television switches to channel 1.
Changing stored channels
You can delete channels that have been stored more than once
during the automatic search. You can also store channels in a diffe-
rent preset position, change or enter the name of a channel as well
as skip channels.
Selecting the station list
1
Press »i« to open the »Main Menu«.
Main Menu
Picture
Program Table
Setup
Features
– The »Main Menu« appears.
2
Select »Program Table« with »P+« or »P-« and confirm with
»OK«
– The »Program Table« menu appears.
ļ
OK
Select
ĵ
İ
Ł
Exit
i
G
Ļ
Note:
Further operation is explained in the following sections.
9
SETTINGS
______________________________________________
Deleting channels
Program Table
1
In the »Program Table« menu, select the station to be deleted by
00
01
02
03
04
05 PRO 7
06 BR 3
07 VOX
08 KABEL
09 S RTL
10 WDR
pressing »P+«, »P-«, » « or » «.
Ǹ
Ƿ
ARD
ZDF
RTL
11
12
13
14
Ƿ
2
Press » « (yellow) to delete the channel.
SAT1
Note:
G
G
G
G
Skip
ļ
To delete other stations, repeat steps 1 and 2.
Move
Delete
Name
Select
Exit
OK
ĵ
İ
Ł
Ļ
i
G
Sorting television channels
1
In the »Program Table« menu, select the channel to be moved
Program Table
00
01
02
03
04
05 PRO 7
06 BR 3
07 VOX
08 KABEL
09 S RTL
10 WDR
with »P+«, »P-«, » « of » «.
Ǹ
Ƿ
ARD
ZDF
RTL
11
12
13
14
2
3
Highlight the channel with »
Ȅ« (green).
SAT1
Select a new channel position by pressing »P+«, »P-«, » « or
Ǹ
G
G
G
G
Skip
ļ
Move
Delete
Name
Select
Exit
»
« and then press »Ȅ« to confirm.
OK
Ƿ
ĵ
İ
Ł
Ļ
i
G
– All of the channels that follow move up one position.
Note:
To sort the other television channels repeat steps 1 to 3.
Entering the channel names
(maximum of 5 characters)
1
In the »Program Table« menu, select the desired channel with
Program Table
00
01
02
03
04
05 PRO 7
06 BR 3
07 VOX
08 KABEL
09 S RTL
10 WDR
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
ARD
ZDF
RTL
11
12
13
14
F
2
3
Highlight the channel with » « (blue).
SAT1
Select letters or numbers with »P+« or »P-«, move to the next
G
G
G
G
Skip
ļ
Move
Delete
Name
Select
Exit
position with » « or » « and repeat.
OK
Ǹ
Ƿ
ĵ
İ
Ł
Ļ
i
G
F
4
Store the channel name with » « (blue).
Note:
To enter additional channel names, repeat steps 1 to 4.
Skipping television channels
You can mark television channels which should be skipped during
selection with »P+« or »P-«. A selection with the number keys is
also possible.
Program Table
1
In the »Program Table« menu, select the desired channel with
00
01
02
03
04
05 PRO 7
06 BR 3
07 VOX
08 KABEL
09 S RTL
10 WDR
»P+«, »P-«, » « or » «.
Ǹ
Ƿ
ARD
ZDF
RTL
11
12
13
14
z
2
Highlight the channel with »
« (red).
SAT1
– The television channel is now displayed against a red back-
ground.
– You can deselect the selected channel by pressing the red
button again.
G
G
G
G
Skip
ļ
Move
Delete
Name
Select
Exit
OK
ĵ
İ
Ł
Ļ
i
G
Concluding the settings
Press »i« to finish the settings.
1
10
SETTINGS
______________________________________________
Picture settings
1
2
3
4
Press »i« to open the »Main Menu«.
– The »Main Menu« appears.
Select »Picture« with »P+« or »P-« and confirm with »OK«.
– The »Picture« menu appears.
Select »Brightness«, »Contrast«, »Colour« or »Sharpness« with
»P+« or »P-« and adjust them with » « or » «.
Picture
Brightness
Contrast
Colour
Ǹ
Ƿ
Press »i« to finish the settings.
Sharpness
ļ
OK
ĵ
İ
Ł
Exit
i
G
Ļ
G
Back
11
TELEVISION OPERATION
___________________
Switching on and off
1
Switch on the television by pressing the »
vision set.
Ȃ« button on the tele-
TV
DVD
2
Press the »Ǽ« button to switch the television to standby mode.
Press »1...0« or »P+« or »P-« to switch the television back on
from standby.
ZOOM
PROGRAM
3
Press »
– This saves electricity.
Ȃ« on the television set to switch it off completely.
GO TO
DVD MENU
z
Selecting channels
1
Select channel positions directly with »1...0«.
Use »–/––« to select two digit channel positions.
DVD SETUP
TITLE
TXT
AV
2
Press »P+« or »P-« to move up and down channels.
UPDATE
SUB
Selecting AV channels
d
1
Use »AV« to select AV channels directly.
DVD
EXT.
VCR
SAT
Adjusting the volume
1
Adjust the volume with »–
« or »
+«.
z
z
Muting
Tele Pilot 165 C
1
Use » « to switch the sound off (mute) and to switch it on
again.
p
Displaying time
1
You can display the time by pressing the »
channels with teletext).
Ȅ« button (only for
Changing the picture format
The television automatically switches to the 16:9 format, if this
format is recognised via the Euro-AV socket.
1
Select the picture format with »
format, for example »16:9«, appears on the screen.
– You can choose between the following picture formats:
«. The selected picture
E
»Auto« format
The picture format is automatically switched to »16:9« for 16:9
programmes.
The picture format is automatically switched to »4:3« for 4:3
programmes.
»4:3« format
For 4:3 programmes, select picture format »4:3«.
»16:9« format
For 16:9 programmes, select picture format »16:9«.
12
TELEVISION OPERATION
___________________
Zap function
This function allows you to save the television channel which you
are currently watching and switch to other channels (zapping).
1
Select the channel you want to save in the zap memory with
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by
pressing »Z«.
>
– The display »z – P1 BBC1« appears in the screen.
2
3
Change channels with »1…0« or »P+« »P-«.
You can now use »Z« to switch between the saved channel (in
the example, BBC1) and the channel you were watching before.
4
Press »i« to quit the zap function.
– The display disappears.
13
TELETEXT MODE
___________________________________
FLOF text and normal text mode
Switching on teletext and selecting pages
1
Press »TXT« to switch on teletext.
TV
2
Use »1...0« to enter the page number directly or »P+« and
»P-« to switch up and down pages (to return to page 100,
press »i«).
DVD
ZOOM
PROGRAM
Note:
At the bottom of the screen, you will see an information line
consisting of a red, green, yellow and blue text field. Your
remote control has buttons with the corresponding colours.
GO TO
DVD MENU
z
F
z
3
4
Press »
« (red), »
Ȅ
« (green), »II« (yellow) or » « (blue) to
select a teletext page. This depends on the options in the infor-
mation line.
DVD SETUP
TITLE
TXT
AV
Press »TXT« to switch off teletext.
UPDATE
SUB
d
Additional functions
DVD
EXT.
VCR
SAT
Skipping the waiting time
While a page is being searched for, you can switch to the television
channel.
Tele Pilot 165 C
1
Enter the teletext page number with »1...0« and then press
»UPDATE«.
– As soon as the page is found, the teletext page number
appears in the top left hand corner of the screen.
2
Switch to the teletext page by pressing »UPDATE«.
Increasing the character height
If you have difficulty reading the text on the screen, you can double
the character height.
1
To enlarge the character height of a teletext page, keep pressing
»–/––«.
Page hold
A multiple page may contain several sub-pages, which are auto-
matically scrolled by the transmitting station.
1
2
Hold the sub-pages with »Z««.
Press »Z« to end the function.
14
TELETEXT MODE
___________________________________
Opening a sub-page directly
If the selected teletext page contains additional pages, the number
of the current sub-page and the total number of pages are dis-
played.
TV
DVD
ZOOM
1
2
Press »SUB« to select the sub-page function.
PROGRAM
Enter the four-digit sub-page number with »1...0«.
– The selected sub-page is displayed after a short delay.
GO TO
DVD MENU
z
Reveal answer
Certain teletext pages contain hidden answers or information. These
can be viewed.
DVD SETUP
TITLE
TXT
AV
1
2
Press »
Press »
« to display the information.
« to conceal the information.
E
UPDATE
SUB
E
d
DVD
EXT.
VCR
SAT
Tele Pilot 165 C
15
CONVENIENCE FUNCTIONS______________
Picture format
You can switch the picture format to 16:9 for widescreen broadcasts
or DVDs.
1
Press »i« to open the »Main Menu«.
– The »Main Menu« appears.
Features
Picture Format
Sleep Timer
AVL
AUTO
Off
On
2
3
4
5
Select »Features« with »P+« or »P-« and confirm with »OK«.
Select »Picture Format« by pressing »P+« or »P-«.
Select the picture format by pressing » « or » «.
Language
Ǹ
Ƿ
ļ
OK
ĵ
İ
Ł
Exit
i
G
Ļ
G
Back
Press »i« to finish the setting.
Entering the switch-off time
You can enter a switch-off time. After this time has elapsed, the tele-
vision switches to standby mode.
1
Press »i« to open the »Main Menu«.
– The »Main Menu« appears.
Features
Picture Format
Sleep Timer
AVL
AUTO
00:12
On
2
3
4
Select »Features« with »P+« or »P-« and confirm with »OK«.
Select »Sleep Timer« with »P+« or »P-«.
Language
Enter the required time (in 15 minute intervals from 15 to
120 minutes) by pressing » « or » «.
ļ
OK
ĵ
İ
Ł
Ǹ
Ƿ
Exit
i
G
Ļ
G
Back
5
Press »i« to finish the setting.
Note:
To delete the switch-off time, select »Sleep Timer« again and
press » « or » « to select »Off«.
Ǹ
Ƿ
Automatic volume
Television stations broadcast at different volumes. The automatic
volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1
Press »i« to open the »Main Menu«.
– The »Main Menu« appears.
Features
Picture Format
Sleep Timer
AVL
AUTO
Off
On
2
3
Select »Features« with »P+« or »P-« and confirm with »OK«.
Select »AVL« with »P+« or »P-« and then select »On« with
Language
ļ
»
« or » «.
OK
ĵ
İ
Ł
Ǹ
Ƿ
Exit
i
G
Ļ
G
Back
4
Press »i« to finish the setting.
16
CONVENIENCE FUNCTIONS______________
Changing the menu language
1
Press »i« to open the info menu.
– The info menu appears.
Features
Picture Format
Sleep Timer
AVL
AUTO
Off
On
2
3
Select »Features« with »P+« or »P-« and confirm with »OK«.
Language
Select »Language« with »P+« or »P-« and confirm with
»OK«.
– The »Language« menu appears.
ļ
OK
Select
G
ĵ
İ
Ł
Exit
i
G
Ļ
Back
4
5
Select the language with »P+«, »P-«, » « of » « and press
Ǹ
Ƿ
»OK« to confirm.
Press »i« to finish the setting.
Parental lock
You can block any station. The screen goes black.
1
Press »i« to open the info menu.
– The info menu appears.
Setup
System
Channel
Fine Tune
Search
BG
C 34
0
2
Select »Setup« by pressing »P+« or »P-« and confirm with
»OK«.
ĵ Ł
Autoprogram
Child Lock
Program No
Store
On
P1
3
4
Select »Child Lock« with »P+« or »P-«.
Press » « or » « to activate or deactivate the parental lock
Ǹ
Ƿ
ļ
OK
(On) or (Off).
Press »i« to finish the setting.
ĵ
İ
Ł
Exit
i
G
Ļ
G
Back
5
17
DVD MODE
___________________________________________
Special DVD features
Your DVD player provides you with perfect digital video playback of
studio quality.
It also provides superb cinema-quality audio playback – in stereo or
with digital multi-channel sound – depending on the type of DVD and
audio system or stereo television.
Other features of DVD video include the choice of audio channel and
language, choice of subtitle language, and various camera recording
angles. Your DVD player is suitable for DVDs with regional code 2.
As well as DVDs, it can also play MP3 CDs, JPEG coded (photo) CDs,
video CDs, S-video CDs and audio CDs.
Disc formats
Your DVD player can play back CD-R, CD-RW, VCD 2.0, Super-VCD,
DVD R, DVD RW discs.
Due to the difference in quality of the recording media and the quality of
the recording itself, it can occasionally happen that a home-made DVD
or CD cannot be read. This does not indicate a malfunction of the DVD
player.
You have to finalise your own CD-R and CD-RW recordings.
Note that the settings of your CD burning program must meet the ISO
9660 standard in order to create a CD-R or CD-RW.
When MP3 or JPEG CDs are played back, individual tracks/pictures
may be skipped or incorrectly played back and displayed. This can be
due to the disc configuration, the encoder software or the hardware
used for the recording.
Audio CDs (CDDA) correspond to the specification and bear the corre-
sponding logo. Copy-protected CDs do not meet this specification and
do not bear the corresponding logo. These CDs can cause playback
errors.
18
DVD MODE
___________________________________________
Preparation
Switching on
1
2
Switch on the television and press »TV/DVD« to select DVD
mode.
If an audio system or an AV receiver is connected to the device,
switch it on and select the audio input for the device.
Inserting a disc
1
2
3
Open the disc compartment by pressing »ə«.
– The disc compartment opens.
Insert the disc you want to play in the disc compartment with
the label facing upwards.
Close the disc compartment with »ə«.
– The disc tray retracts again and the disc is scanned.
Notes:
Playback of a DVD, VCD, SVCD or audio CD (CDDA) starts
automatically.
The file browser appears if an MP3 or JPEG CD is inserted.
If the »
« symbol appears on the television screen, the
selected function is not possible with this disc.
Removing discs
Press »ə« to open the compartment and take out the disc.
1
19
DVD MODE
___________________________________________
DVD features
You can recognise a DVD by the logo on the label.
Depending on the content of the DVD, the discs contain one or more
titles.
Each title may contain one or more chapters. Titles and chapters
can be selected easily and conveniently.
You can control and direct playback of a DVD using the menu of the
DVD player on the television screen.
Special DVD features
DVDs have a title menu which provides an overview of the available
titles and the passages they contain.
Some of the DVD player’s functions, such as slow motion, freeze-
frame and auto-play, can also be controlled by the DVD itself. It is
therefore possible that the freeze-frame function, for example, can-
not be selected during certain scenes.
Many DVDs have audio tracks recorded in up to eight languages.
This enables you to select the language you prefer.
Many DVDs are recorded by the manufacturer with subtitles in
several languages. You can select subtitles from up to 32 different
languages.
Since films are released in different parts of the world at different
times, all DVD players world-wide are given a regional code. The
regional code for your DVD player is 2.
DVDs may also be given a supplementary regional code. If you
insert a DVD with a code different to that of the DVD player, a
reference to the regional code appears on the television screen.
The DVD player will not be able to play back the DVD.
S-VCD/VCD features
You can recognise S-VCD/VCDs (video CDs) by the logo on the
label.
Depending on the contents of the S-VCD/VCD (films, music videos
etc.), the discs may carry one or more tracks.
Like audio CDs, S-VCDs/VCDs have a track structure.
S-VCDs/VCDs can be created using the PBC (playback control) sys-
tem for track navigation. This depends on the processing and burn-
ing software used.
You can control and direct playback of the S-VCD/VCD using the
menu on the television screen.
You cannot select some of the functions (slow motion, camera angle,
marking scenes) when you are playing an S-VCD/VCD. This
depends on how the S-VCD/VCD was created.
Depending on how they were created, S-VCDs can have various
subtitles and dubbed languages.
20
DVD MODE
___________________________________________
MP3 CD features
MP3 stands for MPEG-1 Audio Layer 3 and arises from the Motion
Picture Expert Group (MPEG) Standard which was developed for
compressing film data.
The MP3 format enables audio files to be saved on a computer with
a sound quality similar to that of a CD. This only requires approx.
10% of the original data quantity. The standard encoding bit rate
for MP3 files is 128 kbps. Generally, the higher the bit rate of a an
MP3 file, the better the sound quality.
Most MP3 files on the Internet are encoded at 128 or 160 kbps.
160 kbps is considered CD quality.
MP3 files can be downloaded from the Internet and then burned
onto a CD-ROM disc. Your DVD player can read the ID3 tag from
the file header, which contains information on title and artist, and
display this in the info menu/status display.
MP3 CDs contain sound recordings. They can be played in the
normal manner on an audio system. The digital signals transmitted
during MP3 playback are PCM coded, regardless of the audio
output setting. The signals are output with the same data rate as the
music source (possibilities are: 32 kbps – 320 kbps, ideal: 128 kbps).
MP3 files can be organised into folders and subfolders, similar to
files within a PC.
JPEG CD features
JPEG stands for Joint Picture Experts Group. This process was
designed to compress picture files.
JPEG files can be burned onto a CD along with other file types.
Such CDs are known as file CDs or mixed mode CDs. For example,
the CD could contain MP3 files (audio) and JPEG files (for example
to display album covers).
The files on a JPEG CD can be organised in directories. This struc-
ture is similar to that of an MP3 CD.
JPEG CDs only contain data in the compressed JPEG format. This is
mostly data from digital cameras or from imaging programs. The
data (images) can be displayed individually or in sequence in a
slide show.
Audio CD features
An audio CD is identified by this logo.
Audio CDs contain only sound recordings. They can be played in
the normal manner on an audio system.
The individual tracks are stored in a sequence. There are no folders.
21
DVD MODE
___________________________________________
Using a DVD, video CD or audio CD
Depending on the disc being used, some functions may not be
available.
Playing back a title
1
After the disc compartment closes and the disc is scanned, play-
back starts automatically.
2
3
4
5
6
To pause playback (freeze-frame), press »8!«.
Press »8!« to resume playback.
Press »7« to interrupt playback.
Press »8!« to resume playback.
End playback with »7« (press twice).
Note:
Depending on the disc being used, you may have to select
chapters or titles on the disc using »P+«, »P-«, » « or »
and press »OK« to activate the or »8!« to start playback.
«
Ǹ
Ƿ
Calling up information*
You can call up information on the title, chapter and playing time
for display on the screen.
1
Press »GO TO« twice to display the info menu.
– You will see information on:
DVD, VCD
Title 01/02
Disc type
The current title and available
titles
Chapter 03/18
2:05:00
The current chapter and available
chapters
Elapsed playing time of the
chapter
0:03:50
Remaining playing time of the
chapter
2
Repeatedly press »GO TO« to hide the info menu.
Calling up the zero setting function*
You can select a playback position to the precise second with the
zero setting function.
1
2
3
Press »GO TO« three times to display the zero setting function.
Select the time, title and chapter input with » « or » «.
Ǹ
Ƿ
Using the numerical buttons »1…0« enter the time, title or
chapter number and press »OK« to confirm.
4
Playback starts at the position you entered.
* DVD or video CD only
22
DVD MODE
___________________________________________
Selecting the camera angle and repeat function*
Many DVDs contain scenes or passages which were filmed several
times from different camera angles. You can choose from among
these different angles.
You can repeat the current chapter or title with the repeat function.
1
Press »GO TO« four times to display the camera angle and
repeat function.
2
3
Select the »Angle« or »Repeat« function with » « or » «.
Ǹ
Ƿ
Press »OK« to select the camera angle or repeat function you
want.
4
Repeatedly press »GO TO« to hide the menu.
Selecting titles and chapters using the disc menu*
If a disc contains several titles and/or chapters, you can select them.
If a disc contains several tracks/chapters, this can be seen by »Title«
and »Chapter« in the info menu.
1
Call up the contents of the disc with »DVD MENU« (Disc Menu)
or »TITLE« (Title Menu).
– If the disc has a title menu it will appear on the screen.
2
Select tracks or chapters with »P+«, »P-«, » « or » « and
activate with »OK«.
– Playback of the selected title or chapter begins.
Ǹ
Ƿ
Selecting chapters in steps (SKIP)
1
To select the next chapter, press »
« during playback.
s6
2
Press »
« to select the previous chapter.
5a
– Playback of the selected chapter begins.
Pausing and resuming playback
The playback of a DVD can be interrupted at any point and then
resumed from the same place.
1
2
Interrupt playback by pressing »7« once only.
Press »8!« to resume playback at the point where it was
interrupted.
Ending playback
You can stop playback at any point by pressing »7« twice.
* DVD or video CD only
23
DVD MODE
___________________________________________
Additional functions during DVD or video
CD playback
Notes:
The sound is muted during the “Frame search”, “Slow motion”
and “Freeze-frame” functions.
Depending on the disc, some functions cannot be selected.
Frame search
Several different speeds are available.
1
Select the playback speed during
playback by pressing »3« or »4«.
2
Press »8!« to resume playback.
Slow motion
You can choose between different speeds (1/2, 1/4, 1/6, 1/8, for-
wards or reverse).
1
2
3
Press »8!« during playback.
Select the slow motion speed by pressing »3« or »4«.
Press »8!« to resume playback.
Freeze-frame (Pause)
1
Press »8!« during playback.
2
Press »8!« to resume normal playback.
Enlarging the picture (zoom)
This function allows you to enlarge various picture sections. The pic-
ture enlargement options are selected in the sequence: 1, 2, 3, 4,
Off (normal size).
1
2
3
During playback or pause, press »
– Part of the picture is enlarged.
« repeatedly.
E
Move the picture section on the screen with »P+«, »P-«, » « or
Ǹ
»
Ƿ
«.
Switch back to “normal” picture size with »
«.
E
24
DVD MODE
___________________________________________
Using an MP3 CD or JPEG CD
Playback
1
After the disc compartment has closed and the MP3 CD or JPEG
CD has been scanned, the File Browser (Contents menu) of the
disc is displayed.
2
Press »P+«, »P-«, » « or » « to select the track you want to
Ǹ
Ƿ
hear and then »OK« to start playback.
Press »8!« to pause playback.
Press »8!« to resume playback.
End playback by pressing »7«
3
4
5
Selecting specific tracks using the numerical
buttons
1
During playback, select the track with »1 ... 0« and press
»OK« to confirm.
– Playback begins with the selected track.
Selecting a track in steps (SKIP)
1
Select the next track by pressing »
« during playback.
s6
2
Select the previous track by pressing »
– Playback begins with the selected track.
«.
5a
Additional JPEG CD playback functions
Adjusting the picture display
The pictures can be rotated or reversed.
1
During playback, press » « or » « to rotate the pictures
Ǹ
Ƿ
by 90°.
During playback, press »P+« or »P-« to reverse the pictures.
2
Enlarging/reducing the picture (Zoom)
This function allows you to enlarge or reduce various picture sec-
tions.
1
2
3
During playback or pause, press »
– Part of the picture is enlarged.
« repeatedly.
E
Move the picture section on the screen with » « or » «,
»P+« or »P-«.
Ǹ
Ƿ
Switch back to “normal” picture size with »
«.
E
25
DVD MODE
___________________________________________
Creating and playing a playlist
This function enables you to create a playback list for all types of
discs.
Up to 12 titles, chapters or tracks can be stored.
1
2
Place a disc in the tray.
Open the »Program Input« menu by pressing »PROGRAM«.
– Depending on the type of disc in use the program menu
appears, and position 1 is marked.
Program Input
Title/Chapter
1
2
3
----
----
----
4
5
6
----
----
----
7
8
9
---- 10 ----
---- 11 ----
---- 12 ----
3
4
Enter the number of the title, chapter or track with »1…0«.
Play Program
Clear All
Select the next input position with » «, » «, »P+« or »P-«.
Ǹ Ƿ
Note:
Delete all entries by selecting »Clear All« using »P+«, »P-«,
»
« or » « and press »OK« to confirm.
Ǹ
Ƿ
5
6
To play back the track memory, select »Play Program« with
»P+«, »P-«, » « or » « and press »OK« to confirm.
– Playback of the program starts.
Press »7« to end playback.
Ǹ
Ƿ
26
DVD SETTINGS_____________________________________
No settings are necessary for operating the DVD unit of the tele-
vision set.
However, in the menu, you can change the language, select sound
effects, select the picture format and make many other settings.
Selecting the menu
1
2
3
4
Press »DVD SETUP« to open the menu.
– The menu appears.
Installation Picture
Sound Child Lock
Player Language
Subtitle
English
Off
Select the menu with » « or » « and press »OK« to activate.
Ǹ
Ƿ
– The selected menu item is highlighted.
Audio Language
Menu Language
Display Function
Auto
Auto
On
Select the item with »P+« or »P-« and press »OK« to confirm.
– The setting options are displayed.
Select the function or setting using »P+« or »P-« and press
»OK« to confirm.
Note:
Press »P+« to go back one step in the menu items.
5
Press »DVD SETUP« to quit the menu.
Menu options
Installation Picture
Sound Child Lock
Voice
– Player Language:
– Select the on-screen menu “language”.
– Select and display subtitles.
Player Language
Subtitle
English
Off
– Subtitle:
Audio Language
Menu Language
Display Function
Auto
Auto
On
– Audio Language:
– Menu Language:
– Display Function:
– Select the dubbing “language”.
– Select the language of the DVD menus.
– Switch function displays (e.g. II Pause)
on/off.
Picture menu
– TV Format:
– Set the picture format (4:3 PS (PanScan),
4:3 LB (Letterbox), 16:9).
Installation Picture
Sound Child Lock
TV Format
4:3 PS
Auto
– TV Standard:
– JPEG View:
– Select the TV standard (NTSC, PAL, Auto).
TV Standard
JPEG View
– Select the display of JPEG pictures
(Original, Screen size).
Original
5 Seconds
On
JPEG Interval
Last Memory
– JPEG Interval:
– Last Memory:
– Select the display time of JPEG pictures
(5, 10, 15 seconds).
– Switch on/off.
27
DVD SETTINGS_____________________________________
Installation Picture
Sound Child Lock
Sound menu
– Digital Output:
Set the digital output (Off, Raw
(Original format), PCM).
Digital Output
PCM
Off
LPCM 48k DS
– LPCM 48k DS:
Set the scanning rate 48 kHz (setting:
On) or 98 kHz (setting: Off).
Parental lock
– Code:
Enter the password and press »OK«
to confirm. (After you enter a ran-
domly selected numerical code the
access level can no longer be
changed.)
Installation Picture
Sound Child Lock
Code
- - - -
8. Adult
Reset
F
Access Level
Factory Defaults
– Access Level:
Select access level (1 to 8).
(The lock symbol must be opened
using a code.)
– Factory Defaults:
Return to default settings.
28
USING EXTERNAL DEVICES
_______________
Decoder or satellite receiver
A decoder is needed if the television receives encoded programs
from a privately operated station.
Connecting a decoder or satellite receiver
VIDEO A/L A/R
AV
COAXIAL
Decoder
PAY-TV
1
Connect the »AV1« socket on the television set and the corre-
sponding socket on the decoder using a EURO-AV cable.
Notes:
A satellite receiver can also be connected to this socket.
If you want to use both a satellite receiver and a decoder, the
decoder must be connected to the satellite receiver.
Using a decoder
1
Switch on the television and the decoder.
2
Select the »AV1« preset channel by pressing »AV« repeatedly
until »AV1« appears on the screen.
Headphones
DIO
L
AU
Connecting the headphones
R
EO
VID
1
Insert the headphone jack (3.5 mm ø jack plug) in the head-
phone socket on the television.
PRG/V
O
L
MENU
29
USING EXTERNAL DEVICES
_______________
Video recorder or set-top box
Connecting a video recorder or set-top box
VIDEO A/L A/R
AV
COAXIAL
2
EXTERNAL
EXTERNAL
/
DEC.
-
AV
2
AUDIO
L
L
O
U
T
I
N
1
/
EURO
-
AV
1
ń
R
R
1
Connect the »AV1« socket on the television to the correspond-
ing socket of the video recorder or set-top box using a Euro-AV
(Scart) cable.
Using a video recorder or set-top box
1
Switch on the video recorder or set-top box and select the
desired function.
2
Select the »AV1« channel using »AV«.
– You can hear and see the video and audio information from
the video recorder or the set-top box on the television set.
Notes:
You can connect an external RGB device (set-top box) to the
Euro-AV1 socket. However, you will need to use a fully assigned
Euro-AV cable for this.
The signal of the built-in DVD player is not transmitted via the
Euro-AV socket.
Using an S-Video device
If you have a device with an S-Video output, you can connect it
using a EURO/AV (Scart) cable to the »AV1« socket.
Press »AV« to select the »AV1-S« channel.
30
USING EXTERNAL DEVICES
_______________
Camcorder
Connecting a camcorder
1
Connect the yellow socket (VIDEO – picture signal) on the tele-
vision and the corresponding socket on the camcorder (VHS,
Video 8) using a cinch cable.
DIO
L
AU
R
EO
VID
MENU
2
Connect the white and red sockets (L AUDIO R – sound signal)
on the television and the corresponding sockets of the cam-
corder with a cinch cable.
Using a camcorder (VHS, Video 8)
1
Switch on the camcorder, insert a cassette and start playback.
2
Select the »AV2« channel (for VHS, Video 8) by pressing »AV«
repeatedly until »AV2« appears on the screen.
– You will see the picture and hear the sound of the camcorder
on the television.
31
USING EXTERNAL DEVICES
_______________
Connecting a multi-channel amplifier or digital
two channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS).
WT–A
DE/L /R
AV
COAXIAL
1
2
Plug a standard cinch cable into the cinch socket »COAXIAL«
(digital audio signal) on the television and into the correspond-
ing socket on the digital multi-channel amplifier.
Plug a standard cinch cable into the cinch sockets »VIDEO«
(picture signal), »A/L« (left audio signal) and »A/R« (right
audio signal) on the television and into the corresponding
sockets on the digital multi-channel amplifier.
Note:
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that no signal can be output via the »COAXIAL«
socket.
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
“Dolby”, “Dolby Pro Logic”, “Dolby Digital” and the double-D symbol “ij” are
trademarks of the Dolby Laboratories Licensing Corporation. Copyright 1992
Dolby Laboratories, Inc. All rights reserved.
32
SPECIAL SETTINGS
______________________________
Setting television channels
This setting is only necessary if a new channel comes on air and you
do not want to change the order of your channels. The television
channel can be set directly or using the search.
Setting channels using the search
1
Press »i« to open the »Main Menu«.
2
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
Setup
System
3
4
Select »Program No« with »P+« or »P-« and set the preset
BG
C 34
0
channel with » « or » «.
Ǹ
Ƿ
Channel
Fine Tune
Search
Autoprogram
Child Lock
Program No
Store
ĵ Ł
Select »Search« with »P+« or »P-« and start the search with
« or » «.
»
Ǹ
Ƿ
On
P1
– If a strong station signal is received, the search is interrupted
and the picture appears. Repeat the search until the channel
you want appears on the screen.
ļ
OK
ĵ
İ
Ł
Exit
i
G
Ļ
G
Back
Note:
The current system is automatically displayed in the »System«
line.
Setup
System
Channel
Fine Tune
Search
Autoprogram
Child Lock
Program No
Store
BG
C 34
0
5
6
Select »Store« with »P+« or »P-« and confirm with »OK«.
– The »Stored« message appears.
ĵ Ł
On
P1
Note:
To set other television stations, repeat steps 3 to 5.
ļ
OK
Store
ĵ
İ
Ł
Exit
i
G
Ļ
G
Back
Press »i« to finish the setting.
Fine tuning television channels
The television automatically tunes itself to the best possible recepti-
on. You may need to carry out manual fine tuning in areas where
there is poor reception.
Setup
1
2
Press »i« to open the »Main Menu«.
System
Channel
Fine Tune
Search
Autoprogram
Child Lock
Program No
Store
BG
C 34
0
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
ĵ Ł
On
P1
3
4
5
Select »Fine Tune« with »P+« or »P-« and set it with »
«
Ǹ
or » «.
Ƿ
ļ
OK
ĵ
İ
Ł
Select »Store« with »P+« or »P-« and confirm with »OK«.
Exit
i
G
Ļ
G
Back
– The »Stored« message appears.
Press »i« to finish the setting.
33
SPECIAL SETTINGS
______________________________
Setting the television channels by entering the
channel numbers
Main Menu
Picture
Program Table
Setup
1
2
Press »i« to call up the »Main Menu«.
Features
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
ļ
OK
Select
ĵ
İ
Ł
3
Select »Program No« with »P+« or »P-« and set the
Exit
i
G
Ļ
channel with » « or » «.
Ǹ
Ƿ
Setup
System
Channel
Fine Tune
Search
Autoprogram
Child Lock
Program No
Store
4
5
Select »Channel« with »P+« or »P-« and confirm with »OK«.
BG
C 34
0
Press »OK« to choose between »S« (special channel) and »C«
(channel).
ĵ Ł
On
P1
6
Press » « or » « to switch up and down channels or use
Ǹ
Ƿ
»1…0« to enter the channel number directly.
ļ
0
C/S
–
9
G
G
OK
ĵ
İ
Ł
Note:
Exit
Ļ
i
G
G
Back
The current system is displayed in the »System« line.
Setup
If the colour or sound are incorrect, select »System« with »P+«
or »P-«. Make the necessary adjustments with » « or » «.
System
Channel
Fine Tune
Search
Autoprogram
Child Lock
Program No
Store
BG
C 34
0
Ǹ
Ƿ
ĵ Ł
7
8
Select »Store« with »P+« or »P-« and confirm with »OK«.
On
P1
Note:
To set other television stations, repeat steps 3 to 7.
ļ
OK
Store
ĵ
İ
Ł
Press »i« to finish the setting.
Exit
i
G
Ļ
G
Back
Re-tuning all television channels
You can re-tune all the television stations, for example if you move
to another town.
1
2
Press »i« to open the »Main Menu«.
Setup
System
Channel
Fine Tune
Search
Autoprogram
Child Lock
Program No
Store
BG
C 34
0
Select »Setup« with »P+« or »P-« and confirm with »OK«.
– The »Setup« menu appears.
ĵ Ł
On
P1
3
4
Select »Program No« with »P+« or »P-« and using » « or
Ǹ
»
« enter the channel numbers from the point they should be
Ƿ
saved.
ļ
0
–
9
G
G
OK
ĵ
İ
Ł
Exit
Ļ
i
G
G
Back
Select »Autoprogram« with »P+« or »P-« and confirm with
»OK«.
– The »Autoprogram« menu appears.
5
6
Select the country using »P+«, »P-«, » « or » « and confirm
with »OK«.
Ǹ
Ƿ
Press »OK« to start the search.
– The automatic search may last a few minutes, depending on
the number of television channels received.
Note:
You can interrupt the search by pressing »i«.
34
INFORMATION_____________________________________
Technical data
Mains voltage:
230 V, 50 Hz
Power consumption: 2 W in standby, 65 W in operation
Sound output:
2x6 W music power
Reception range:
C01 ... C99, special channels S01 ... S41,
frequency band 1 ... 4
Preset channels:
Disc formats:
100 and 3 AV
DVD R (+/–), DVD RW (+/–), CD-R,
CD-RW
Media formats:
DVD video, audio CD, video CD,
S-Video CD, CD-ROM (MP3, JPEG)
Service information for dealers
The product complies with the following EU directives:
73/23/EEC directive for electrical equipment to be used within defined volt-
age ranges. 89/336/EEC directive on electromagnetic compatibility.
The television set complies with the following standards: EN 60065, EN
55013, EN 55020.
General instructions for laser devices
Your system is a CLASS 1 LASER PRODUCT. This means that the laser is designed in such a way as to
ensure that the maximum permissible emission value cannot be exceeded under any circumstances.
CLASS 1
LASER PRODUCT
Caution:
If operating devices or methods other than those specified here are employed, it may lead to dange-
rous exposure to emissions.
This device emits laser radiation. Because of the danger of eye injuries, the unit may only be opened
or serviced by trained personnel.
If settings other than those specified here are employed or OTHER PROCEDURES are carried out, this
may lead to dangerous radiation exposure.
This product contains components which are covered by certain U.S. patents or for other reasons
are considered intellectual property of the Macrovision Corporation and other proprietors. Use of
this protected technology must be approved by the Macrovision Company and is only permissible
for private presentation at home or for other limited applications, where no special permission has
been granted by Macrovision. Reproduction or disassembly of the device is prohibited.
Manufactured with permission from Dolby Laboratories. The ”Dolby” label and the double-D logo
”ij” are trademarks of Dolby Laboratories. Confidential unpublished material.
©1992-1997 Dolby Laboratories, Inc. All rights reserved.
During playback of DTS-coded CDs and DVDs, a high noise level is produced at the analogue ste-
reo outputs. In order to avoid possible damage to he audio system, the user should take appro-
priate preventive measures when the stereo outputs of the DVD player are connected to an amplifi-
cation system. For DTS Digital Surround playback, an external 5.1-channel DTS Digital Surround
decoder must be connected to the digital output (S/PDIF) of the DVD player.
DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. All rights reserved.
35
INFORMATION_____________________________________
Troubleshooting
If the remedies given below do not work, please consult an authorised
GRUNDIG dealer. Please bear in mind that malfunctions can also be caused
by external devices such as video recorders or satellite receivers.
TV operation
Fault
Possible cause
Remedy
Screen lit (snow), but no
station
Antenna cable
Is the antenna cable
connected?
No television station
programmed
Start the station search
Poor picture contrast
Picture settings incorrectly Adjust the brightness,
set
contrast or colour setting
Problem at station
Test with another channel
Interference to picture
and/or sound
Interference from other
devices
Change the position of the
devices
Ghosting, reflection
Channel setting
Automatic or manual
channel setting/fine tuning
Antenna
Have antenna cable or
system checked
No colour
Colour intensity at
minimum
Turn up the colour
TV standard setting (if
Select the correct colour
setting option is available) standard
Problem at station
Test with another channel
Inappropriate colour,
colour spots
Strong magnetic field due, Move the loudspeakers
for example, to loud-
speakers
away from the television
If colour spots remain,
switch off the television set
at the mains and switch on
again after 10 minutes
Volume set to minimum
Turn up or switch on the
volume
Picture but no sound
Problem at station
Test with another channel
Television station (has no
Test another channel for
Teletext missing or faulty
teletext) or antenna system fine tuning and ghosting
Station signal too weak
No optical connection
Check the antenna system
Point the remote control at
the television set
Remote control does not
work
Remote control batteries
Check the batteries, change
if necessary
Operating condition
undefined
Switch off the television
with the main power button
for approximately
2 minutes
Parental lock has been
activated
Deactivating the parental
lock
The picture is unrecognis-
able after switching on the
television
36
INFORMATION_____________________________________
DVD mode
Fault
Cause/Remedy
The disc compartment will Switch the DVD player off and back on again using the
not open, picture/sound
problems.
power switch.»Ȃ«
Distorted picture
Make sure that there are no fingerprints on the disc,
follow the cleaning instructions.
DVD/CD cannot be played Check if the label on the disc is facing upwards.
Clean the disc.
Check if the disc is damaged by testing another disc.
No sound
Try another playback source.
Use an external decoder for DTS audio formats.
No sound at the digital out- The scanning rate was set to 96 kHz. Set the scanning
put.
rate to 48 kHz as described on page 28.
Cleaning discs
Wipe the dirty disc with a cloth from the centre outwards in a straight line.
Do not use any solvents such as benzene, thinners, conventional cleaner or anti-static spray for vinyl
records.
Software information
We wish to point out explicitly that only operating software authorised by GRUNDIG is permissible for
the DVD player. This operating software is available from specialist dealers or from the Grundig web
net source being loaded to the device will impair functioning and also, since it is an unauthorised
intervention, invalidate any claims under the guarantee.
GRUNDIG will refuse to refund any costs resulting in such cases. Any repair costs in such cases, even
those occurring within the guarantee period, are to be paid by the customer.
37
INFORMATION_____________________________________
Additional Information for units sold in the UK.
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains
supply.
The range of multi-system receivers is built to work in most European coun-
tries. However, the mains plug and socket system for the UK differs from
many European countries.
This appliance has been supplied with a fitted, non-removable, approved
converter plug for use in the UK. This converter plug is fitted with a 5A rated
fuse.
In case this appliance is supplied with a moulded 2-pin Euro plug only,
which is unsuitable for UK operation, this must be cut off and immediately
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a
qualified electrician.
Note:
The severed Euro plug must be destroyed to avoid a possible shock
hazard should it be inserted into a socket elsewhere.
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any
other type of plug is used it must be protected by a 5A fuse either in the
plug, or at the distribution board. If this type of plug becomes defective,
ensure that the fuse is removed before disposal, to eliminate potential shock
hazard.
If it is necessary to change the fuse in the non-rewireable plug, the correct
type and rating (5A ASTA or BSI approved BS1362) must be used and the
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and
plug must not be used until a replacement is obtained. Replacement fuse
covers should be obtained from your dealer.
Important:
The wires in the mains lead are colour coded in accordance with the follo-
wing code:
BLUE – NEUTRAL
BROWN – LIVE
As the colours of the wires in the mains lead of your appliance may not cor-
respond with the coloured marking identifying terminals in your plug, pro-
ceed as follows:
Connect the BLUE coloured wire to plug terminal marked with the letter “N”
or coloured black.
Connect the BROWN coloured wire to the plug terminal marked with the let-
ter “L” or coloured red.
In no circumstance must any of the wires be connected to the terminal mar-
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-
low.
38
|