QuickSpecs
Overview
HP Smart Array P411 Controller
The HP Smart Array P411 is HP's PCI Express (PCIe) Serial Attached SCSI (SAS) RAID controller. The low profile, half height card has 8
ports and utilizes DDR2-800 memory. 'The P411 is ideal for RAID 0/1, 5, 1+0 & 5+0 and can be upgraded with the 512MB battery-
backed write cache (BBWC) or 512MB/1G Flash Backed Write Cache (FBWC) module and Smart Array Advanced via license key for RAID 6
&, 6 +0.
What's New
Updating supported hard drives.
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 1
QuickSpecs
Standard Features
HP Smart Array P411 Controller
The Smart Array
Advantage
HP's innovative design and integration work of the Smart Array family of products creates customer value
that is unmatched in the industry. Use of Smart Array products across multiple applications results in a
much lower Total Cost of Ownership (TCO) than any other server storage RAID product. The HP Smart Array
family brings an unparalleled return on investment through:
Data Compatibility among all models of Smart Array controllers allows simple and easy upgrades any
time needs for higher performance, capacity, and availability increase. Even successive generations of
Smart Array controllers understand the data format of other Smart Array Controllers.
Consistent Configuration and Management Tools. All Smart Array products utilize a standard set of
management and utility software. These tools minimize Total Cost of Ownership (TCO) by reducing training
requirements and technical expertise necessary to install and maintain the HP server storage.
Universal Hard Drive form factor is for use across multiple HP servers, disk enclosures and storage
systems. With compatibility across many enterprise platforms, you are free to deploy and re-deploy these
drives to quickly deliver increased storage capacity, migrate data between systems, and easily manage
spare drives.
Pre-Failure Warranty means HP Insight Manager not only reports when a drive is going to fail but allows
replacement of failing drives prior to actual failure. For complete details, consult the HP Support Center or
refer to your HP Server documentation.
Key Features
The SA-P411 Controller supports up to 100 drives. Additional drives can be supported with cache
and connection to an expander
The SA-P411 Controller supports the HP 60 Modular Smart Array,HP 70 Modular Smart Array, HP
D2600 Disk Enclosure, HP D2700 Disk Enclosure, and HP 600 Modular Disk System.
Seamless upgrades to current or next generation HP high performance and high capacity Serial
Attached SCSI Smart Array controllers
6Gb/s SAS technology delivers high performance and data bandwidth and contains full compatibility
with 3Gb/s SATA technology.
x8 PCI Express host interface technology delivers high performance and data bandwidth up to 2
GB/s maximum bandwidth.
Addition of the battery or flash backed cache upgrade enables array expansion, logical drive
extension, RAID migration, and stripe size migration.
Additionally, Smart Array Advanced Pack License key enables RAID 6 (ADG), 6+0, Advanced Capacity
Expansion, Mirror Splitting and Recombining in Offline Mode, Drive Erase, Performance
Optimization-Degraded Reads and Read Coalescing (VOD)
Mix-and-match SAS and SATA hard drives, lets you deploy drive technology as needed to fit your
computing environment.
Support for SAS tape products.
Software consistency among all Smart Array family products: Array Configuration Utility, Systems
Insight Manager, Array Diagnostic Utility (ADU) and SmartStart.
256 MB 40-bit wide DDR2-800 MHz cache module standard (with optional battery upgrade)
Low-profile PCI Express form factor - ships with a full size bracket for deployment in either a low-
profile or full sized slot
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 3
QuickSpecs
Standard Features
HP Smart Array P411 Controller
Online Management
Features
Online array expansion (with BBWC or FBWC)
Online Advanced Capacity Expansion (with BBWC or FBWC and Smart Array Advanced Pack upgrade)
Online logical drive extension (with BBWC or FBWC)
Online RAID Level Migration (with BBWC or FBWC)
Online Stripe Size Migration (with BBWC or FBWC)
Offline Mirror splitting and recombining (with BBWC or FBWC and Smart Array Advanced Pack
upgrade)
Unlimited global online spare assignment
User selectable expand and rebuild priority
User selectable RAID level and stripe size
User selectable read and write cache size ratio
Ports
Eight (8) SAS physical links distributed across 2 external x4 miniSAS connectors.
Performance
HP's High Performance Architecture sets new boundaries of industry performance expectations!
6Gb/s SAS (600MB/s bandwidth per physical link)
8x 6Gb/s SAS physical links (compatible with 3Gb/s SATA)
256MB 40-bit wide DDR2-800MHz cache upgradeable to 512MB 72-bit wide DDR2-800MHz battery-
backed write cache or 512MB / 1G 72-bitwide DDR2 flash backed write cache provides up to 4.2 GB/s
maximum bandwidth
Write-back caching (with BBWC or FBWC)
Native Command Queuing Native Command Queuing (NCQ) is a technology designed to increase performance of SATA hard disk drives
by allowing the individual hard disk to internally optimize the order in which received read and write
commands are executed. This can reduce the amount of unnecessary going back-and-forth on the drive's
heads, resulting in increased performance for workloads where multiple simultaneous read/write requests
are outstanding, most often occurring in server or storage-type applications. Without NCQ the drive has to
process and complete one command at a time. For NCQ to be enabled, it must be supported and turned on
in the controller and in the hard drive itself.
NOTE: Please see the SATA Hard Drive QuickSpecs for specific SATA hard drive capacities that support NCQ:
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 4
QuickSpecs
Standard Features
HP Smart Array P411 Controller
Capacity
Given the increasing need for high performance and rapid capacity expansion, the SA-P411 offers:
Up to 48TB of external storage per controller with 1 x HP MSA2040 SAN Storage and 12 x 4TB LFF
SAS hard drives
Up to 24TB of external storage per controller with 1 x HP MSA2040 SAN Storage and 24 x 1TB SFF
SAS hard drives
Up to 384TB of external storage per controller with 8 x HP D2600 Disk Enclosure and 96 x 4TB 3.5"
SAS or SATA hard drives
Up to 240TB of external storage per controller with 8 x HP D2700 Disk Enclosures and 200 x 1.2TB
SFF SAS hard drives
Up to 200 TB of external storage per controller with 8 x HP D2700 Disk Enclosures and 200 x 1TB
SFF SATA hard drives
NOTE: Please check the website of the supported Disk Storage System to get the most recent information
on maximum capacity.
Availability
Provides increased server uptime by providing advanced storage functionality:
Online RAID Level Migration (between any RAID level/with BBWC or FBWC)
Online Capacity Expansion (with BBWC or FBWC)
Online Advanced Capacity Expansion (with Smart Array Advanced Pack)
Logical Drive Capacity Extension (with BBWC or FBWC)
Global Online Spare
Pre-Failure Warranty
Fault Prevention
The following features offer detection of possible failures before they occur, allowing preventive action to
be taken:
S.M.A.R.T. (Self Monitoring Analysis and Reporting Technology) was first developed by HP which
detects possible hard disk failure before it occurs, allowing replacement of the component before
failure occurs.
Drive Parameter Tracking monitors drive operational parameters, predicting failure and notifying
the administrator.
Dynamic Sector Repairing continually performs background surface scans on the hard disk drives
during inactive periods and automatically remaps bad sectors, ensuring data integrity.
Smart Array Cache Tracking monitors integrity of controller cache, allowing pre-failure preventative
maintenance.
Environment Tracking for External Storage System: Monitors fan speed and cabinet temperature of
Modular Smart Array Enclosures and HP Disk Enclosures.
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 5
QuickSpecs
Standard Features
HP Smart Array P411 Controller
Fault Tolerance
Keeps data available and server running while a failed drive is being replaced; several fault tolerance
configurations are supported including:
RAID 6 with ADG (Advanced Data Guarding): This is the highest level of fault tolerance. It allocates
two sets of parity data across drives and allows simultaneous write operations. This level of fault
tolerance can withstand two simultaneous drive failures without downtime or data loss.
RAID 6+0: Supported with min of 8 drives, but would have 4 available. Target benefit is to split RAID
across the external boxes
NOTE: RAID 6, 6+0 can be enabled with either
Minimum of 256 MB cache with Battery kit and Smart Array Advanced Pack License key option
upgrades
Minimum of 512 MB BBWC or FBWC and Smart Array Advanced Pack License key option
upgrades
RAID 5 (Distributed Data Guarding): This allocates one set of parity data across drives and allows
simultaneous write operations. This level of fault tolerance can withstand a single drive failure
without downtime or data loss.
RAID5 is available on the SA P411 with a minimum of 256MB cache
RAID 5+0: This is a RAID 0 array striped across 5 elements. Combines the straight block-level
striping of RAID 0 with the distributed parity of RAID 5.
Drive Mirroring (RAID 1, 1+0): This allocates half of the drive array to data and the other half to
mirrored data, providing two copies of every file. It is a high-performance RAID.
Fault Recovery
Minimizes downtime, reconstructs data, and facilitates a quick recovery from drive failure
Recovery ROM: This new feature provides a unique redundancy feature that protects from a ROM
image corruption. A new version of firmware can be flashed to the ROM while the controller
maintains the last known working version of firmware. If the firmware becomes corrupt, the
controller will revert back to the previous version of firmware and continue operating. This reduces
the risk of flashing firmware to the controller.
On-Line Spares: There is no limit to the number of spare drives that can be installed prior to drive
failure. If a failure occurs, recovery begins with an On-Line Spare and data is reconstructed
automatically.
DRAM ECC corrects against single bit data and address corruption.
Battery-backed write cache upgrade provides for up to two days of battery power for data cache
retention. The data backup duration could be extended anytime the server's auxiliary power is
available during system power down.
Flash Backed Write Cache upgrade provides indefinite data retention.
Ease of Use
Consistency and Upgradeability make the Smart Array family unique in the industry:
GUI based configuration, management and diagnostic software tools
Common data format between generations of products
Data migration between servers and external HP Modular Smart Array enclosures and HP Disk
Enclosures
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 6
QuickSpecs
Standard Features
HP Smart Array P411 Controller
Warranty
The warranty for this device is 3 years parts, labor and onsite.
Pre-Failure Warranty: Drives attached to the Smart Array Controller and monitored under Insight
Manager are supported by a Pre-Failure (replacement) Warranty. For complete details, consult the HP
Support Center or refer to your HP Server Documentation.
Warranty Upgrade Options
Response - Upgrade on-site response from next business day to same day 4 hours
Coverage - Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days
Duration - Select duration of coverage for a period of 1, 3, or 5 years
Warranty upgrade options can come in the form of Care Packs, which are sold at the HP System
level this product attaches too
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 7
QuickSpecs
Compatibility
HP Smart Array P411 Controller
Server Support
For up to date compatibility, please see the following URL for complete Smart Array P411 Controller
compatibility and support information:
Operating Systems
Microsoft Windows 2003 x64
Microsoft Windows 2003
Microsoft Windows 2003 x84
Microsoft Windows 2008 Server x64
Microsoft Windows 2008 Server x84
Novell Open Enterprise Server, NetWare 6.5
SP5
Red Hat Enterprise Linux 4, 5, & 6 (x64 & x84)
SUSE Linux Enterprise Server 9 (x64 & x84)
SUSE Linux Enterprise Server 10 (x64 & x84)
SUSE Linux Enterprise Server 11 (x64 & x84)
VMWare
NOTE: For more Linux OS support & certification information, please visit:
ProLiant & BladeSystem Server Linux matrix
Integrity & BladeSystem Server Linux matrix
Software Suite
All Smart Array products share a common set of configuration, management and diagnostic tools,
including Array Configuration Utility (ACU), Array Diagnostic Utility (ADU), and Systems Insight Manager.
These software tools reduce the cost of training for each successive generation of product and take much
of the guesswork out of troubleshooting field problems. These tools lower the total cost of ownership by
reducing training and technical expertise necessary to install and maintain HP server storage.
Systems Insight Manager
Powerful server and server options/storage manager tool
Monitors over 1200 system wide parameters
Configuration/Diagnostic Utilities
HP Array Configuration Utility (ACU)
Powerful Web based configuration utility for all Smart Array controllers
Provides a graphical view of HP drive array configurations
Allows for management of multiple arrays over a secure internet connection from anywhere in the
world
Easy to use Wizards for configuration
Runs online on Windows and NetWare (CPQONLIN)
HP Option ROM Configuration for Arrays (ORCA)
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 8
QuickSpecs
Compatibility
HP Smart Array P411 Controller
An alternative method for easily viewing, creating, and deleting multiple arrays and logical volumes
during system power up.
For advanced array configurations use ACU
NOTE: For advanced array configurations use ACU.
HP Array Diagnostic Utility (ADU)
In depth diagnostic and reporting utility for all Smart Array controllers
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 9
QuickSpecs
Service and Support
HP Smart Array P411 Controller
Service and Support
HP Care Pack Services: Packaged server and storage services for increased uptime, productivity and
ROI
When you buy HP server and storage products and solutions, it's also a good time to think about what
levels of support you may need. Our portfolio of service options reduce deployment and management
worries while helping you get the most out of your server and storage investments. We take a holistic
approach to your environment, bridging servers, blades, storage, software and network infrastructures
with our packaged HP Care Pack Services for servers and storage.
Protect your business beyond warranty
When it comes to robustness and reliability, standard computing equipment warranties have matured
along with technology. Good news that can also create problems stemming from depending on standard
warranties designed to only protect against product defects and some downtime causes. Using a standard
approach to warranty uplifts, such as HP Care Pack Services, helps reduce downtime risks and provides
operational consistency for mission-critical and standard business computing.
HP Care Pack Services: Upgrading or extending standard server and storage warranties cost
effectively
HP Care Pack Services offer a standard reactive hardware and software support services suite sold
separately, or combined with our Support Plus and Support Plus 24 services. The portfolio also provides a
combination of integrated proactive and reactive services, such as Proactive 24 Service and Critical Service.
In addition with HP Proactive Select, you can acquire the specific proactive constancy and technical
services. HP Proactive Select menu offers a broad set of service options that you can mix and match
depending on your specific requirements. Proactive service options include offers for server, storage,
network, SAN device, software, environment and education services.
HP server and storage lifecycle support services offers a full spectrum of customer care-from technology
support to complex migrations to complete managed services. HP Factory Express provides
customization, integration and deployment services for turnkey solutions. HP Education Services offer
flexible, comprehensive training on to help your IT staff get the most out of your server and storage
investments. HP Financial solutions extend innovative financing and cost-effective asset management
programs-from purchase to equipment retirement.
NOTE: Care Pack Services availability may vary by product and country.
HP Care Pack Services are sold by HP and HP Authorized Service Partners:
Services for customers purchasing from HP or an enterprise reseller are quoted using HP order
configuration tools.
Customers purchasing from a commercial reseller can find HP Care Pack Services at
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 10
QuickSpecs
Service and Support
HP Smart Array P411 Controller
Recommended HP Care Pack Services for optimal satisfaction with your HP product
Recommended Services Hardware Options Support
HP Care Packs provide support for all HP-branded hardware options qualified for inclusion in your server
or storage solution. Any additional HP-qualified options installed within the server are covered at the same
service level and for the same period as the server and no additional cost.
Help improve or maintain system uptime
Convenient onsite support
Committed response time
3-Year HP Hardware Support Onsite Service, 4-hour response, 24x7
Provides you with rapid remote support and if required an HP authorized representative who will arrive on
site any time and day of the year to begin hardware maintenance service within 4 hours of the service
request being logged.
This service provides a trained HP service specialist to perform an installation that meets HP quality
standards, for:
Help improve or maintain system uptime
Convenient onsite support
Committed response time
HP Installation and Startup of HP ProLiant Servers
Provides for the installation of your new HP ProLiant server and operating system to assist you in bringing
your new HP ProLiant server and operating system into operation in a timely and professional manner.
This service provides a trained HP service specialist to perform an installation that meets HP quality
standards, for:
Delivery of the service at a mutually scheduled time convenient to your organization
Availability of an HP service specialist to answer basic questions during the onsite delivery of this
service
Custom installation as detailed in "Delivery specifications" or in a Statement of Work (SOW)
Verification prior to installation that all service prerequisites are met
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 11
QuickSpecs
Service and Support
HP Smart Array P411 Controller
Optional HP Care Pack Services that will enhance your HP product experience
Optional Services
3-Year HP Hardware Support Onsite Call-to-Repair (CTR) Service, 6- or 24-hour
As an alternative to our recommended support level, for customers who need committed call-to-repair for
server hardware.
Provides your IT manager with a team of support specialists who will quickly begin troubleshooting the
system to help return the hardware to operating condition within 6 or 24 hours of the initial service
request to the HP Global Solution Center.
3-Year HP Support Plus 24
As an alternative to our recommended support level, for customers who need access to responsive 24x7
hardware and software support plus software updates on HP and selected third party products:
For a higher return on your server and storage technology, our 3-year combined reactive support service
delivers integrated onsite hardware/software support services available 24x7x365, including access to HP
technical resources, 4-hour response onsite hardware support and software updates.
HP Proactive Select Service
Customer needs on demand access to consulting, technical proactive services and education courses
Provides a flexible way to purchase HP best-in-class consultancy and technical services. You can buy
Proactive Select Service Credits when you purchase your hardware and then use the credits over the next
12 months.
eSupport
HP eSupport is a portfolio of technology-based services that assist you with managing your business
environment - from the desktop to the data center.
Support Portal
The HP support portal provides one-stop access to the information, tools and services you need to
manage the daily operations of your IT environment.
Features include:
Access to self-solve tools (including search technical knowledge base)
Efficient logging and tracking of support cases
Collaboration with other business and IT professionals
Download of patches and drivers
Access to diagnostic tools
Proactive notification of relevant information
Access to certain features of the support portal requires an HP service agreement. To access the support
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 12
QuickSpecs
Service and Support
HP Smart Array P411 Controller
HP Insight Remote Support software delivers secure remote support for your HP Servers and Storage, 24 X
7, so you can spend less time solving problems and more time focused on your business. You can have
your systems remotely monitored for hardware failure using secure technology that's been proven at
thousands of companies around the world. In many cases, you can avoid problems before they occur.
Customer Technical
Training
In today's cost-conscious business environment, IT professionals, developers, consultants and users face
an interesting challenge: how to keep up with the latest technologies and expand important skills while
delivering profitable results on current projects. To help address this challenge, HP offers innovative
training solutions that help keep you up-to-date on virtualization, server, storage, Insight Control, Citrix,
Microsoft® and open source/Linux-related topics-while spending less time away from business-critical
activities.
HP Services Awards
HP Technology Services continues to be recognized for service and support excellence by customers,
partners, industry organizations and publications around the world. Recent honors and award reflect our
services team's dedications, technical expertise, professionalism and uncompromising commitment to
customer satisfaction.
Additional Services
Information
To learn more on HP ProLiant servers, HP BladeSystem servers and HP storage products, please contact
your HP sales representative or HP Authorized Channel Partner. Or visit: www.hp.com/services/proliant or
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 13
QuickSpecs
Related Options
HP Smart Array P411 Controller
Upgrade Options
HP Optional Upgrades
HP 512MB P-Series Battery Backed Write Cache Upgrade
462967-B21
462969-B21
HP 650 mAh P-Series Battery
NOTE: To enable BBWC on the 256MB cache.
HP 512MB Flash Backed Write Cache
HP 1GB Flash Backed Cache
534916-B21
534562-B21
HP Smart Array Advanced Pack including 1yr 24x7 Technical Support and Updates
Single Server License
516471-B21
NOTE: This part number can be used to purchase a single license or to order multiple
licenses with a single activation key. Customers will receive a license entitlement
certificate via e-mail. The license entitlement certificate must be redeemed online or via
fax in order to obtain the license activation key(s). Include one year of 24x7 HP
Software Technical Support Services.
NOTE: A license key and a minimum of 256MB cache with battery kit or a license key
and FBWC are required to enable features. For more information go to:
HP Disk Storage Systems MSA 2040 Storage
HP MSA 2040 SAS Dual Controller LFF Storage
C8S54A
C8S55A
HP MSA 2040 SAS Dual Controller SFF Storage
NOTE: Please see the supported MSA 2040 QuickSpecs for a list of compatible hard
Modular Smart Arrays
HP MSA60 Array
418408-B21
418800-B21
NOTE: Supports 12 SFF drives, and SAS 3 Gb/s and SATA 1.5 Gb/s.
HP MSA70 Array
NOTE: Supports 25 SFF drives, and SAS 3 Gb/s and SATA 1.5 Gb/s.
NOTE: Please see the QuickSpecs for additional information and a list of compatible
hard drives:
(MSA60)
(MSA70)
Disk Enclosures
HP D2000 Disk Enclosures
HP D2600 Disk Enclosure
NOTE: Supports 12 LFF drives, and SAS 6 Gb/s and SATA 3 Gb/s.
AJ940A
AJ941A
HP D2700 Disk Enclosure
NOTE: Supports 25 SFF drives, and SAS 6 Gb/s and SATA 3 Gb/s.
NOTE: Please see the QuickSpecs for additional information and a list of compatible
hard drives:
HP 600 Modular Disk System
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 14
QuickSpecs
Related Options
HP Smart Array P411 Controller
HP MDS600 with Dual I/O Modules Disk System
AJ866A
NOTE: Please see the QuickSpecs for additional information including configuration
steps and additional options needed for a complete solution at:
HP Tape Backup
NOTE: For the complete range of StorageWorks tape drives, autoloaders, libraries and
NOTE: The HP Smart Array P411 Controller is for connection to external (desktop) tape
drives, tape drives in Rack-Mount Kits, tape autoloaders and tape libraries.
SAS Tape Drives
HP StoreEver DAT 160 SAS Internal Tape Drive
HP StoreEver DAT 160 SAS External Tape Drive
HP DAT 320 SAS Internal Tape Drive
Q1587A
Q1588A
AJ830A
AJ828A
DW086A
EH848A
EH920A
EH946A
EH861A
HP DAT 320 SAS External Tape Drive
HP StoreEver LTO-2 Ultrium 448 SAS External Drive
HP StoreEver LTO-3 Ultrium 920 SAS External Tape Drive
HP StoreEver LTO-4 Ultrium 1760 SAS External Tape Drive
HP LTO-4 Ultrium 1760 SAS (1) in 1U Rack-mount Kit
HP StoreEver LTO-4 Ultrium 1840 SAS External Tape Drive
Rack-mount Tape Drive Enclosures
HP 1U SAS Rack-mount Kit
AE459A
NOTE: The 1U SAS Rack-Mount Kit can support up to (2) half-height tape drives and is
compatible with the DAT 160 SAS (Q1587A), LTO-2 Ultrium 448 SAS (DW085A), LTO-3
Ultrium 920 SAS (EH847A) and LTO-4 Ultrium 1760 (EH919A) tape drives.
HP 3U SAS Rack-mount Kit
AG576A
NOTE: The 3U Rack-mount Kit can support up to (2) full-height or (4) half-height tape
drives and compatible with multiple SAS tape drives including DAT 160 SAS (Q1587A),
LTO-2 Ultrium 448 SAS (DW085A), LTO-3 Ultrium 920 SAS (EH847A), LTO-4 Ultrium
1760 SAS (EH919A) and LTO-4 Ultrium 1840 SAS (EH860A) tape drives.
SAS Tape Autoloaders
HP 1/8 G2 LTO-4 Ultrium 1760 SAS Tape Autoloader
HP 1/8 G2 Ultrium 920 SAS Autoloader
AK377A
AH558A
SAS Tape Libraries
HP MSL2024 1 LTO-4 Ultrium 1760 SAS Tape Library
HP MSL2024 Ultrium 920 SAS Tape Library
HP MSL4048 2 LTO-4 Ultrium 1760 SAS Tape Library
HP StorageWorks MSL4048 Ultrium 920 SAS Tape Library
HP MSL8096 2 LTO-4 Ultrium 1760 SAS Tape Library
HP StorageWorks MSL8096 2 Ultrium 920 SAS Tape Library
SAS Cables for Tape Drives and Automation
AK378A
AH559A
AK380A
AH560A
AK382A
AH561A
HP SAS Min-Min 1x-2M Cable Assembly Kit
AE470A
NOTE: Use this cable to connect HP StorageWorks SAS external tape devices to HP SAS
controllers with external Mini-SAS (SFF8088) connectors.
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 15
QuickSpecs
Related Options
HP Smart Array P411 Controller
HP SAS MIN-MIN 1X-4M Cable Assembly Kit
AE465A
NOTE: Use this cable to connect HP StorageWorks SAS external tape devices to HP SAS
controllers with external Mini-SAS (SFF8088) connectors.
HP 2m External Mini-SAS to 4x1 Mini-SAS Cable
NOTE: One cable is required for every four drives. Use this cable to connect HP
StorageWorks MSL SAS Tape Libraries to Mini-SAS (SFF8088) ports.
AN975A
AN976A
HP 4m External Mini-SAS to 4x1 Mini-SAS Cable
NOTE: One cable is required for every four drives. Use this cable to connect HP MSL SAS
Tape Libraries to Mini-SAS (SFF8088) ports.
HP Optional Cables
Mini SAS Cables
HP Mini SAS to Mini SAS 28in Cable Assembly
HP Mini SAS to Mini SAS 33in Cable Assembly
HP Mini SAS to 8484 18in/24in Cable Assembly
HP Mini SAS to 8484 32in/35in Cable Assembly
Additional Cables
496013-B21
496014-B21
496015-B21
496016-B21
HP 15 Position 24in SFP Battery Cable Assembly
496029-B21
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 16
QuickSpecs
Technical Specifications
HP Smart Array P411 Controller
Dimensions (excluding
bracket)
Low Profile PCIe Form Factor
19.05 cm x 24.13 cm x 5.72 cm (7.5 in x 9.5 in x 2.25 in)
Disk Drive and Enclosure 6Gb/s SAS (Serial Attached SCSI)
Protocol Support -
Transfer rate
3Gb/s SATA (Serial AT Attachment)
SAS Connectors
Data Transfer Method
Memory Bus Speed
PCI
2 external (Mini SAS) x8 wide port connectors
x8 5G PCIe 2.0 Express (4 GB/s maximum bandwidth)
DDR2-800 MHz with 40 bit or 72-bit wide bus provides up to 4.2 GB/s maximum bandwidth
PCIe Express Gen 2.0
2 x4 Wide SAS Ports
Simultaneous Drive
Transfer Ports
SAS Port Link Rate
24 Gb/s per x4 wide port connector (4 x 6 Gb/s)
Yes
Software upgradeable
Firmware
Cache Memory
40-bit 256MB ECC protected cache (72-bit 512MB BBWC or 72-bit 512MB and 1G FBWC module upgrades
available); transportable with battery-backed or flash upgrade
Logical Drives Supported Up to 64 logical drives
Memory Addressing
RAID Support
64-bit, supporting servers memory space greater than 4 GB
RAID 6, 6+0 (Advanced Data Guarding)
NOTE: RAID 6, 6+0 can be enabled with either
Minimum of 256 MB cache with Battery kit or FBWC and Smart Array Advanced Pack License key
option upgrades
Minimum of 512 MB BBWC or FBWC and Smart Array Advanced Pack License key option upgrades
RAID 5, 5+0 (Distributed Data Guarding)
NOTE: A minimum of 256 MB cache is required to enable RAID 5, 5+0 support of the Smart Array P411
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Upgradeable Firmware
Upgradeable Firmware with Recovery ROM feature
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 17
QuickSpecs
Technical Specifications
HP Smart Array P411 Controller
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
and Recycling
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2013 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. Microsoft and Windows are registered trademarks or trademarks
of Microsoft Corporation in the U.S. and/or other countries. The only warranties for HP products and services are set forth in the
express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13202 Worldwide — Version 25 — November 1, 2013
Page 18
|