ROOM AIR CONDITIONER
HW-18EMA13(T3)
HW-24EMA13(T3)
This function will work only under cooling status.
0010534931
Mode switch controls the fan motor speed,Cooling
speed or Heating speed.
When set to “FAN”, fan motor runs to blow out
air.
When set to “HIGH COOL”, air-con will start
cooling at high speed, blowing out strong air.
When set to “MED COOL”, air-con will start
cooling at med speed, blowing out less stronger air.
When set to “LOW COOL”, air-con will start
cooling at low speed, blowing out gentle air.
When set to “HIGH HEAT”, air-con will start
heating at high speed, blowing out strong air.
When set to “LOW HEAT”, air-con will start
heating at low speed, blowing out gentle air.
When set to “OFF”, air conditioner stops
running.
This function will work only under cooling status.
CLOSE:to the left side;
OPEN:to the right side;
Note :
Your model may differ from the one shown.
|