Full Automatic Washing Machine
with Pump
User's manual
This manual is for
HWM55-10
Please read this manual
carefully before using.
0030806972C
Retain it for future reference.
Names of the parts
Top lid A
Water valve
Top lid B
Water absorption cushion
Cabinet handle
Detergent box
Lint filter
(Installed by user)
Control panel
Filter cover
Inner tub
Drain hose
Pulsator
Control panel film
Adjustable foot
Fixed foot (3)
Cabinet
ase frame
ack cover
Meaning and description of the symbols
Contents marked with that symbol are related to the
safety of the product and the personal safety of the
users. Please operate in strict conformity to the contents,
otherwise it may cause damage of the machine or
injure the personal safety of the user.
Warning sign
Contents marked with that symbol are actions forbidden
to perform. Performing of those actions may result
in damage of the machine or injure the personal
safety of the user.
Forbidden sign
1
Safety precautions
The power cord plug should be convenient
Please plug the plug on special receptacle
with rated voltage. Be sure to use single-
phase three pins receptacle. Ensure the
earthing prong of the power receptacle is
earthed reliably. Use leakage protector if
possible.
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle, when
moving the machine, or when cleaning
the machine. Do not use wet hand to ins-
ert or pull out the power plug.
Do not damage the power cord, bend , extend, twist, bind or alter it by force.
Do not press or nip it with weight. If the power cord or the power plug is bad,
or the power plug becomes flexible, to avoid risk it is required to have it replaced
by the technicians of our special shop or the after-sale service department.
Keep the pin of the power plug clean, if the power plug is polluted
with dust, please wipe with dry cloth carefully.
Do not put the machine at damp place like
Do not use water hotter above 50 C .
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
The ventilation holes
at the bottom
soft items
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
2
Safety precautions
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children. Do not let the children
climb the washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
r
Petrol
Thinne
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent the lint inside the tub from blocking
the cascade outlet during washing, please
keep the lint filter in good condition, and
Toprotect your laundries and wash-
ing machine, please take out all of the
coins, buttons, sand, hairpin and
other foreign materials before washing.
install it to proper position. If the lint filter
is lost or damaged, please contact the local
after-sales service department of our company.
Please check if the water faucet is open,
and if the connection of the water inlet
pipe is proper.
It is suggested to use foamless washing
powder.
Install
Dismantle
3
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual.
It is very important to your security and correct operating the machine.
Install the bottom plate
Install the lint filter
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth, blanket, etc. ).
Install the bottom plate to the bottom of the
machine with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure:
Push the lint filter downward to
location for lint filter.
Front
Back
Soft items
Screw
Bottom plate
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2
.
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
adjustable nut
Fasten
adjustable foot
Loosen
High
Low
2.Fasten the nut after adjustment.
4
How to change the direction of the drain hose
3
protrude the drain hose from the hole
on the right side of the bottom, and fast
it onto the bottom with the rack and screws.
Set the bracket on the drain hose .There
is a hole on the cabinet to hang the drain
hose (as figure 3).
1
Dismount the back cover of the
washing machine.
Drain hose rack
Figure 3
Figure 1
4
install the back cover as what it looks
before.
2
Take off the drain hose frame. Put
down the drain hose. Take off the
drain hose rack. As indicated in
Figure 1 Pull the drain hose into the
cabinet from the left side of the bottom
(as figure 2).
Figure 2
Usage of the drain hose
The drainage shall be smooth with the drain hose
1.Put the drain hose up to suitable position.
Do not put it on ground.
Mouth of
drain hose
Notes: the mouth of drain pipe should higher
than the water level of washing tub for
avoiding to siphon phenomenon during
drain.
Do not tramp or press the drain hose.
5
Install the water inlet hose
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the valves can result.
2. Connect the other ends to the water inlet valve .
( As figure 2)
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 2
Figure 1
Water absorption cushion
Check the connection between the jointer of
the water inlet hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap is firm,
so as to prevent dropping from improve Installation
position.
Take down the water inlet hose
1.After using, Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
6
Preparation before washing
Preparation before washing
1.Connect the water inlet hose and open
the water tap .
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Hang up the drain hose.
4.Slanting or uneven ground may result in
unstable working or abnormal noise. Please
make the machine stand horizontally.
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket. Fasten the The quantity of
When the pulsator
the laundries is running , the
shall not exceed buttons of the
the rated value. laundries may
The big laundries cause noise. For
there's special Take out the
requirment for coins , sand,
the laundries. hairpins etc.
buttons and
zippers.
like the jeans
shall be put in
loosely.
t h e s a k e o f
discretion, please
put the laundries
with buttons into
other laundries.
a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not water absorbing, please put them into water with hands.
d.For laundries with much soil, please remove the soil first. You can add detergent on the
part with serious soil directly. It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber, please first turn the inside out before
putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn, and woolen laundries,
please put them into mesh bag before washing.
7
Put in the laundries
The capacity of washing and spinning of the
machine refer to the largest weight of the
standard laundries under dry condition that
can be washed or spinned in one time. One
time washing quantity shall be lower than the
rated capacity.
The thickness, size, type ofthe cloth willinf-
luence the actual washing capacity. It is sui-
table for one time washing to putin reasona-
ble amount of laundries and the laundries can
be turned round in washing.
Do not select high water level forlaundries
less than 1.0kg, so asto avoid splashing of
water.
To wash thin laundries like the stocking, silk
etc., please first put them into washing mesh
bag (which can be purchased separately)
before wash.
Usage of the detergent
How to use the washing
powder
Direct dissolved inthe machine
1.Fill water to"Low" water level.
2.Add the power. Run for30 seconds
to dissolve itcompletely.
3.Put in thelaundries. Select
suitable water level.
Inlet box of the detergent
The instant dissolvingof the washing
powder:
1.Prepare warm waterof 30 and a
container.
2.Add the powderwhile stirring to
fully dissolve it.
Put in theproper quantities detergent
according to thewater level andthe
laundries quantities .
How to usethe whitener
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
It is suggestednot to usehigh
sudsing detergent.
Washing powder with poor qualityor
long time storagemaybe caked.
Please pay attention to cleaningthe
detergent box intime
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
8
Use the operation buttons
A.Description of the function of the buttons
button
TER LEVEL SELECTION
WA
Mode and meaning of indicator light
Flashing: indicate the running program
The use selects a suitable water level depending on the load.
If QUICK WASH is selected water level will indicate
2
.After
On: indicate the program about to run,or
indicate the selected mode
water level reaches 2,it will wash while water filling, and wash normally
upon the water level reaching
4
.
After washing for q min, pressing WATER LEVEL button will enable
supplemental water filling, which will stop automatically upon the
water reaching overflow level.
9
7
5
3
1
10
8
6
4
2
STANDARD
JEANS
SOAK
WASH
RINSE
GENTLE
QUICK WASH
SPIN
WATER LEVEL SELECTION
PROGRAM SELECTION
PROCEDURE SELECTION
button
PROGRAM SELECTION
You can select from the following four programs.
STANDARD
JEANS
Normal wash
Large, thick or heavily soiled laundry
Woolen textiles or underwear
button
PROCEDURE SELECTION
GENTLE
With it you can select one or several
processes of soak,wash,rinse and spin.
QUICK WASH 10 min quick wash for load below 2kg
9
START/PAUSE button
POWER ON/OFF button
After the power is switched on, press it to
start the machine.
Press POWER ON/OFF button
to connect power supply.
During working, push it to pause.
During pause, push this button to restart
and go on working.
After power is connected, pressing this
button will cut off the supply.
SURPLUS(MIN)
To indicate -- during sensing.
To indicate remaining min. During
program running.
To indicate remaining reserved time
(hrs) during reservation period.
To indicate fault symbols for abnormal
conditions (see page 16)
SURPLUS(MIN)
POWER
ON / OFF
START
PAUSE
+
RESERVATION
Lock
button
RESERVIATION
Push the button to select the reserve
washing time from 2 to 24 hours.
Pressing the button, the numeral tube
displays the reserved hours to the wash
cycle end. The point light flashes to
indicate in-reservation.
Child safety lock program
Start up: Push the RESERVATION and SPIN and POWER ON/OFF buttons
at the same time. After 2 beep sounds, can set the other program. After all
the program set is finished push the START/PAUSE button, push and hold
RESERVATION and SPIN buttons for more than 2 seconds at the same
time. After a beep sound, the child safety lock program works; all buttons
are locked and cannot be selected.
Release: push and hold RESERVATION and SPIN buttons for more than
2 seconds at the same time. After a beep sound, the child safety lock
program is released.
Remarks: After pressing POWER ON/OFF to connect power supply, if the washing
machine lasts idle more than 10 min, it would automatically shut off the supply.
10
B.Operating procedure and explanations for the
buttons
9
7
5
3
1
10
8
STANDARD
JEANS
SURPLUS(MIN)
6
SOAK
4
WASH
RINSE
GENTLE
2
QUICK WASH
SPIN
POWER
ON / OFF
START
PAUSE
WATELEVEL SELECTION
1
PROAM SELECTION
+
PR3OURE SELECTION
SERVATION
Lock
4
6
2
5
1.Push the POWER ON/OFF button to
switch on the power
/
POWER
ON/OFF
/
2.Push the PROGRAM SELECTION button to
select the suitable automatic program
PROGRAM SELECTION
After switching on the power, the machine will set to STANDARD program automatically.
To select other program, push the PROGRAM SELECTION button till the corresponding
indicator is on. Refer to the PROGRAM SELECTION button in Page 10
For example: select QUICK WASH for the quick washing of
the laundries with light dirt.
Page 10
In selecting the STANDARD or JEANS programs, the machine will
execute fuzzy program to control the complete procedure automa-
tically according to the cloth, weight and water temperature to
select water level current and washing time.
3.Push the PROCESS SELECTION button to select
suitable programs
PROCEDURE SELECTION
After switching on the power, the machine will set to wash-rinse-spin program automatically.
That is the most common program. To select program, push the PROGRAM SELECTION
button to select one or more programs among soak/wash/rinse/spin. Refer to the Selection
method of the procedure programs for the selection.
Page 13
11
Attention
Even there's no water inthe tub, the
spinning will start after acertain period.
Do not usesoak process forwoolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Times of pushing
the"PROCEDURE
SELECTION"butto n
Contents(the nixie tube indicates
the programs about to run)
Selected procedure
selection
Applicable procedure
When the common laundries need
washing,rinsing and spinning.
Soak
Wash
Rinse
Spin
Wash, rinse, spin
0
1
2
3
4
5
Soak Wash Rinse
Spin
Spin
Spin
Wash(the washing liquid
remains in the tub)
Repeat using the washing liquid
Repeat using the washing liquid
Soak Wash
Soak Wash
Rinse
Rinse
Wash,rinse(the rinsing liquid
remains in the tub)
When the laundries need rinsing
and spinning after manual washing
Rinse,spin
When the laundries need only
spinning after manual washing
(first drain the spin)
Soak
Wash
Rinse Spin
Spin(spin after drain)
Soak,wash,rinse,spin
If the laundries are very dirty,
or the sleeve and collar are
dirty,first soakthen wash
Soak Wash
Rinse
Spin
If you push the "PROCEDURE SELECTION" button for 6 times, it will resume the
original mode, and it will circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic
programs.Soak with slight stirring before wash.
4.Push the WATER LEVEL button to
select suitable water level
WATERLEVEL SELECTION
When the power is switched on, the washing machine will check the cloth automatically.
After that, the water level is set automatically. To select other water level, push the
button. Refer to the Standard usage quantity of the detergent and water quantity and
WATER LEVEL SELECTION in Page 9 for the selection.
Page 9
12
Time list of Each Program(minutes)
Wash
(minute)
Spin
(minute)
Water
level
Total time (minute)
Rinse (minute)
Program
About 35 47
About 13 15
About 13 15
About 3
Standard
Rinse twice,each about 2
About 6
About 6
About 35 47
Rinse twice,each about 2
Rinse twice,each about 2
Rinse once, about 2
Jeans
Gentle
About 24
About 10
About 2
About 4 About 3
Quick wash
About 2
Total time: including the normal water inlet time and drain time.
Spin time: the time from intermittent running to finishing.
* The STANDARD and JEANS automatic programs can be fitted with soaking.After
water inlet, first soak for 15-45 minutes, then do wash.
* The total washing time may be influenced by the water inlet pressure and water level.
* When selecting QUICK WASH program,wash,rinse and spin are set automatically.
5 .Push the " RESERVATION" button
to select suitable reserve program
RESERVATION
After switching on, the washing machinereserved wash programwill be automaticallyset
inactive. If youdesire a washcycle to endat a reservedtime, you canpress the
"RESERVATION"button over 2seconds to seta reserved washprogram.
Refer to The button of "RESERVATION" on page 11.
SURPLUS(MIN)
Page 11
Confirm the reserveprogram
When "Reservation" becomes active, thenixie tube
displays the timeto the endof the reservedwash cycle, and
the indicator turnson.
To change the runningprogram or cancelthe reservation,
you should cutoff the supplyand reselect.
The washing will finish
about 18 hours later
6 .Press the "START/PAUSE" button
START
PAUSE
Close the top lid
Finish washing
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
The washing machinecuts off thepower supply
automatically when washcycle ends.
13
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
The lint filter must be used during washing.
It must be cleaned in time after each using.
Install
1. Pull upward to dismantle lint filter.
Dismantle
2. Push downward to install lint filter.
3. Please clean lint filter after wash.
Clean
Dismantle & Install
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcohol etc.
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials andinfluence
the water inlet. Please clean it
Alcohol
Petrol
Thinner
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
(about 1 hour), then close the top lid.
14
Trouble shooting Answer to question
(If there's breakdown, please pull offthe power plug before checking) Thefollowing phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do notrepair it by yourself.
Phenomena
The reason
How to settle
After the reservation is started,
it rings and the digital tub
display "E0"
The top lid is not closed
Close the top lid
Clean the foreign material.
Open and close the top lid once.
Clean the frozen material.
Is the drain hose blocked by
foreign material?
Is the drain hose frozen?
After long running of pump in the
hot weather,power will be cut au-
tomatically for safe.
The draining does not work,or
the speed of draining is too
slow.The digital tub displays
"E1" , and it rings.
Open and close the top lid once.
Some minutes later the machine will
continue to work.
Running pauses during spin,
The digital tube displays "E2",
and it rings.
The top lid is not closed
Close the top lid
Safety switch acts, The spin-
ning cannot work (after twice
revising). The digital tube dis-
plays "E3", and it rings.
Re-order the laundries. Close the
top lid.
Level the machine in right position.
Open and close the top lid once.
Are the laundries put
slantingly?
Is the machine slanting?
It does not water inlet or the
speed is slow(the water level is
not reached after 15 minutes).
The digital tube displays"E4",
and it rings.
Open the waterfaucet. Open
and close the top lid once.
Clean the water inlet valve.
Open and close the top lid
once.
The water faucet open or is
there water supply failure?
The water inlet valve is blocked
Is there power failure?
Is the power plug loose?
Use it when the power is on
Insert the power plug tightly.
The machine does not act.
(The indicators are off.)
Is the machine slanting?
Level the machine properly.
Re-order the laundries,
close the top lid.
Are the laundries slanting
in spinning?
There's abnormal sound
inside the machine
Is there metal material
inside the washing mach-
ine?
Fasten the buttons and
zipper.
Is the jointer screw of the
water inlet hose is loose or
twisted awry?
Fasten the jointer screw
properly.
The water faucet leaks
Common phenomena
Phenomena
Explanation
It is to balance the laundries to avoid slanting.
The spinning is intermittent when it starts.
Supplemental water filled after fabric sensor
has checked fabric(about 48 seconds).
Pause during washing
The program issetting the drain time. Acertain
period is needed before it starts spinning.
Push the SPIN button, but it doesn't act.
It is to avoid splashing during water filling.
The pulsator pauses during water filling in washing and rinsing.
There may be some water flowing out of the drain
hose in the first use of the machine.
It is thewater remained inthe machine duringthe
ex-factory performance inspection.
15
Packing list
Quantity
Name
Storage position
One piece
User's manual
Inside the document bag
Components of the
water inlet hose
The side of connection between the water inlet
hose and the washing machine
Inside the accessory bag
One piece
The side of connection between the jointer of
the water inlet hose and the water faucet
Lint filter
One piece
One piece
Inside the document bag
Bottom plate
Between the upper cushion of the
washing machine package and the
upper seal of the package carton
Tapping screws
Five piece
One set
Inside the document bag
Full automatic
washing machine
Specifications
1/18L 2/21L 3/27L 4/32L 5/35L
6/38L 7/41L 8/44L 9/47L 10/51L
Water level/Water
quantity (about)
Water inlet pressure
0.03MPa-1MPa
5.5kg/5.5kg
Rated washing /
spinning capacity
16
|