Fully Automatic Washing Machine
User's manual
This manual is for
HQM62-K
Special number:0030506681
Please read this manual
carefully before using.
Retain it for future reference.
Before Using
Before Using
Names of the parts
Top lidA
Top lid B
Detergent box
water valve
Sop mat
Cabinet handle
Drain hose
(Installed by user)
Lint filter
Control panel
Filter cover
Inner tub
Power line
Control panel
film
Pulsator
back cover
Cabinet
fixed foot (3)
base frame
Adjustable foot
Meaning and description of the symbols
Contents marked with that symbol are related to the safety
of the product and the personal safety of the users. Please
operate in strict conformity to the contents, otherwise it may
cause damage of the machine or injure the personal safety
of the user.
Warning sign
Contents marked with that symbol are actions forbidden to
perform. Performing of those actions may result in damage
of the machine or injure the personal safety of the user.
Forbidden sign
1
Safety precautions
Before Using
Before Using
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving the machine,or when cleaning
the machine.Do not use wet hand to ins-
ert or pull out the power plug.
Please plug the plug on special 220V AC
receptacle.Be sure to use single-phase
tow pins receptacle.Ensurethe earthing
prong of the power receptacle is earthed
reliably.Use leakage protector if possible.
Do not damage the power cord,bend ,extend,twist,bind or alter it by force.Do not press or
nip it with weight.If the power cord or the power plug is bad, or the power plug becomes
flexible,to avoid risk it is required to have it replaced by
the technicians of our special shop or the after-sale
service department. Keep the pin of the power plug
clean,if the power plug is polluted with dust,please
wipe with dry cloth carefully.
Do not put the machine at damp place like
Do not use water hotter above 50 C .
the bathroom. Never wash it with water.
Not put wet laundries on the control panel.
In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Do not wash water-proof laundries like
the raincoat, bike covers etc. to avoid
abnormal vibrations in spinning.
The ventilation holes
at the bottom
soft items
Do not let the machine share one receptacle with other
electric appliances. If the power plug is damaged, or
the plugging into the receptacle is loose,
do not use the plug any more.
2
Safety precautions
Before Using
Before Using
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of
the children.Do not let the children
climb the washing machine.
Do not decompose, repair or alter the
machine by yourself.
Do not put any hot or heavy items (such
as the kettle with hot water ) on the
washing machine.
Do not wash laundries with volatile
materials (such as thinner, petrol etc.)
l
Petro
nner
Thi
The handicapped or children without
care shall not use the machine.
Keep the machine away from direct
sunlight and heat source like the heater.
3
Before Using
Before Using
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install the lint filter
Install the bottom plate
After you open the package, please lean
the washing machine gently down on soft
items ( like the towel cloth,blanket, etc. ).
Install the bottom plate to the bottom of the
machine with the eight screws by a cross
screwdriver, then lift the machine up gently.
See to the figure:
1.Press downward to
assmble.
2.Pull upward to detach.
Back
Front
Put up
Pull down
Put up
Pull down
Soft items
Screw
Bottom plate
Adjust the installation position
The largest allowed slope of the
shank base of the machine is 2
.
The slanting or rough ground will
result in unstable running or
stoppage of the machine. Please
adjust it with following methods:
Adjust the adjustable foot:
1.To twist the adjustable foot, please
first lift up the side of the foot slightly,
loosen the adjustable nut, and twist
the foot.
adjustable nut
Fasten
adjustable foot
Loosen
High
Low
2.Fasten the nut after adjustment.
4
Before Using
Before Using
How to change the direction of the drain hose
1.Lean the machinedown gently withthe front 3.Extend the drain hose from the left side. Push the
surface facing theground. Loosen theeight drain hose into the groove with hands.
screws by across screwdriver.
Bottom plate
Back
Front
Push the drain hose
into the groove with
hands at this point
Soft item
2.Pull out the drain hose from the groove at the
right side.
4.Install the bottom plate (as per indicated
before), then lift the machine up gently.
Use groove at
Page 4
this side after
direction changing
Usage of the drain hose
The drain hose shall drain smoothly
4.If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not
less than 30mm, and the length shall
not exceed 1.5m.
1.The height of the drain hose shall be
less than 10cm, or the drainage will not
be smooth, and cost such long time that
the machine may stop at mid way.
2.Do not trample or press the drain hose.
If the extra hose is too long, cut it
either atA or at B point.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
5
Before Using
Before Using
Install the water inlet hose
Confirm the water tap
Water tap,not suitable
Water tap,suitable
Outlet end surface
>10mm
It is required that the front end shall be longer than 10mm.
The outlet end surface of the tap shall be flat and smooth. If not please file it to
avoid leakage.
Connection between the water inlet hose jointer and
the water tap
1.Use the new water inlet hose provided with the machine to connect to the water
faucet.Old hose sets should not be reused.
2.Press the lower end of the lock lever and push down the slider. Take off the water
inlet hose jointer from the water inlet hose component. See to Figure 1.
3.Loosen the screw till the water tap can be accessed. Put the jointer of the water
inlet hose on the tap. See to Figure 2. (If the tap diameter is too large and the jointer
can not be set on the water tap, please loosen the four screws and take out the
bushing in the jointer. See to the figure3.)
Water inlet pipe jointer
Screw
Slider
Mark label
Screwdriver
bushing
Locking lever
Water inlet pipe
Figure 1
Figure 2
Figure 3
4.Fasten the four screws evenly. See to Figure 4.
5.Take off the nameplate. Twist the fastening nut as per the indication of the figure.
See to Figure 5.
Remarks: Before twisting the fastening nut, the thread is 4mm above the
upper surface ofthe nut. After twisting the fastening nut, the thread is2mm
above the upper surface of the nut. See to Figure 6.
About 4mm before twisting
About below 2mm after twisting
Nut
Figure 4
Figure 5
Figure 6
6
Before Using
Before Using
Connection between the water inlet hose and the
washing machine
1.Do not takeoff the water absorption
cushion. Please checkif the cushion
is dropped ordamaged before each
usage. If ithappens please contact
our after-sale departmentimmediately.
2.Put the nutof the waterinlet hose on
the valve jointer.
Nut of the water inlet hose
3.Fasten the nut. Swaying it gentlyto
confirm if it'ssuitable.
Water absorption cushion
Jointer of thewater inlet valve
Connection between the jointer of the water inlet
hose and the water inlet hose
1.Push down theslider. Insertthe
Jointer of thewater
inlet hose
water inlet hoseinto the jointer.
2.Hang the locklever to thejointer.
Release the slidertill a click
sound is heard.
Slider
Locking lever
Check the connection between the jointer of the
water inlet hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, openthe tap tocheck if itleaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer
of the water inlet hose and the water
tap, and the installation of the
water inlet hoseare firm, soas to
prevent dropping from improper
Take down the water inlet hose
1.Close the water tap.
2.Press the locking lever. Push down the slider. Then
pull off the water inlet hose. If the machine is used
more than once every week, the jointer of the water
inlet hose can be kept on the tap to prevent
damaging the fixing screw.
Locking lever
Slider
7
Preparation before washing
Using process
i
Preparation before washing
1.Connect the water inlet hose and open
the water tap .
2.Confirm that the washing machine is
earthed reliably . Then insert the power
plug into the receptacle. Do not connect
the earth terminal to the gas pipe and
tap water pipe.
3.Put down the drain hose.
Pay attention to followings before washing the laundries
Confirm
if
Clear the pocket. Fasten the The quantity of
When the pulsator
the laundries is running , the
shall not exceed buttons of the
the rated value. laundries may
The big laundries cause noise. For
there's special Take out the
requirment for coins , sand,
the laundries. hairpins etc.
buttons and
zippers.
like the jeans
shall be put in
loosely.
t h e s a k e o f
discretion,please
put the laundries
with buttons into
other laundries.
a.Please check if the laundries are applicable for washing.
b.Separate those not colorfast from other laundries.
c.For laundries not waterabsorbing,please put them into water with hands.
d.For laundries with much soil,please remove the soil first.You can add detergent on the
part with serious soil directly.It is much easier to remove the soil by that mean.
e.For laundries likely to get lint ball or with long fiber,please first turn the inside out before
putting them into the water.
f.Do not put the laundries polluted with chemicals directly into the washing machine.
g.For those small laundries ,laundries likely to be twisted or worn,and woolen laundries,
please put them into mesh bag before wasing.
8
Using process
i
Put in the laundries
The capacity ofwashing and spinningof the
machine refer tothe largest weightof the standard
laundries under drycondition that canbe washed
or spinned inone time. Onetime washing quantity
shall be lowerthan the ratedcapacity. The largest
capacity of thismachine is 6.2kg.
The thickness, size, type of thecloth will influence
the actual washingcapacity. Itis suitable forone
time washing toput in reasonableamount of
laundries and thelaundries can beturned round in
washing.
Do not select"High" water levelfor laundries less
than 1.0kg, soas to avoidsplashing of water.
To wash thin laundrieslike the stocking, silk etc.,
please first putthem into washingmesh bag (which
can be purchasedseparately) before wash.
Usage of the detergent
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
2.Add the power. Run for 30 seconds
to dissolve it completely.
Inlet box of the detergent
3.Put in thelaundries. Select
suitable water level.
The instant dissolving of the washing
powder:
How to usethe whitener
1.Prepare warm water of 30 and a
container.
2.Add the powderwhile stirring to
fully dissolve it.
Put in the prorer quantities detergent
according to the water level and the
laundries quantities .
It is suggested not to use high
sudsing detergent.
Fill water to decided level. Dilute
the whitener with container. Pour
it slowly into the washing tub.
Avoid using whitener on
laundries with color or pattern as
they are prone to lose color.
The whitener shall not touch the
laundries directly.
Refer to the user's manual for
the usage and quantity of the
whitener.
For powder whitener, please
dissolve it before use.
Washing powder with poor qualityor
long time storage maybe caked.
Please pay attention to cleaning the
detergent box intime
9
Use the operation buttons
Using process
i
a. Description of the function of the buttons
SURPLUS(MIN)
"POWER ON/OFF"button
To indicate -- during sensing.
To indicate remaining min. During
program running.
Press "Power On/Off"button to connect
power supply.
After power is connected, pressing this
button will cut off the supply.
To indicate remaining reserved
time (hrs) during reservation period.
To indicate fault symbols for abnormal
"START/PAUSE"button
conditions (see page 15)
Page 15
After the power is switched on, press it to
start the machine
During working, push it to pause working.
During pause, push this button to restart
and continue operation.
PROGRAM STATUS
PROCEDURE STATUS
HQM62-K
STANDARD
JEANS
SOAK
WASH
RINSE
SPIN
GENTLE
QUICK WASH
WASH
SPIN
POWER
ON/OFF
START
PAUSE
PROGRAM
RESERVATION
WATER LEVEL
on
utt
" b
" WATER LEVEL"button
RESERVATION
M/
"PROGRA
Press"PROGRAM/RESERVATION " button
you can select one or several programs of
Standard,Je ansG, entle,Quick,Rinse and Spin.
Press"PROGRAM/RESERVATION " button
over 2 seconds, you can select the program
of peservtion.the Nixie tube displays the
reserved hrs to the wash cycle end. The
indicator flashes to indicate in-reservation.
The user selects a suitable water level
depending on the load.
Remarks: After pressing "POWER ON/OFF" to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.
10
Use the operation buttons
Using process
i
b.
Operating procedure and explanations for the
buttons
PROGRAM STATUS
PROCEDURE STATUS
HQM62-K
STANDARD
JEANS
SOAK
WASH
RINSE
SPIN
GENTLE
QUICK WASH
WASH
SPIN
POWER
ON/OFF
START
PAUSE
PROGRAM
RESERVATION
WATER LEVEL
1 Press the "POWER ON/OFF" button to switch on
the power supply
POWER
ON/OFF
2 Press the button of" PROGRAM/RESERVATION" to
select a suitable full-automatic program
PROGRAM
RESERVATION
After switching on, the "Standard" program will be thedefault. If other full-automatic program is
desired, you can press thebutton "PROGRAM/RESERVATION" to getthe corresponding
indicator on. Refer to the"Button of 'PROGRAM/RESERVATION'"
paragraph on page 10.
Example: Use the "Quick" program for slightly soiled articles.
Page 10
When "standard" programis selected, thewashing
machine will performfull-automatically controlled fuzzy
program to setwater level, waterflow and washduration
according to thecloth nature andweight
11
Using process
i
Attention
Even there's no water inthe tub, the
spinning will startafter a certain period.
Do not usesoak process forwoolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Times of pushing
the"select"button
Contents(tthe nixie tube indicates
the programs about to run)
Selected program
Applicable procedure
0
1
2
3
4
5
Normal wash
STANDARD
JEANS
Wash (bb) Rinse(cc) Spin(dd)
Large, thick or heavily soiled
laundry
Soak (AA) Wash (bb)
Rinse (CC) Spin (dd)
The laundry needn'tspin to
avoid wrinkles
GENTLE
Wash (bb) Rinse(cc) Spin(dd)
Wash (bb)
QUICK WASH
For load below 1 Kg
Repeat using thewashing
liquid
WASH
SPIN
Wash (bb) Rinse(cc) Spin(dd)
Spin(dd)
When the laundriesneed only
spinning after manual
washing (first drainthen spin)
If you pushthe "PROCEDURE SELECTION"button for 6times, it willresume the
original mode, andit will circulatelike that.
If you selectthe"QUICK WASH" program, you haveto set thefull procedure of
wash, rinse andspin. The procedure can notbe selected.
12
Using process
i
3 Press the "WATER LEVEL" button to select suitable
water level
WATER LEVEL
After switching on the power, press the button "WATER LEVEL" to select a water level according
to the load. Please refer to the button " Water level" on page 10.
Page 10
4 Push the " PROGRAM/RESERVATION" button
to select suitable reserve program
PROGRAM
RESERVATION
After switching on, the washing machinereserved wash programwill be automaticallyset
inactive. If youdesire a washcycle to endat a reservedtime, you canpress the
"PROGRAM/RESERVATION"button over 2 seconds to set a reserved wash program.
Refer to The button of "PROGRAM/RESERVATION" on page 10.
Page 10
Confirm the reserveprogram
When "Reservation" becomes active, thenixie tube
displays the timeto the endof the reservedwash cycle, and
the indicator turnson.
To change the runningprogram or cancelthe reservation,
you should cutoff the supplyand reselect.
the washing will finish
about 18 hours later
5 Press the "start/pause" button
START
PAUSE
Close the top lid
Except water filling and draining, if the
top cover is opened, the washing
machine will stop running and alarm.
Finish washing
The washing machinecuts off thepower supply
automatically when washcycle ends.
13
Disposal after washing
Using process
i
After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
When washing, lint filter must be used
After using, please clean it in time.
Lint filter:
1.Pull upward to detach
Clean
Figure 1
2.Clean the lint
Put it in water and clean while it is still wet.
(See to Figure 1).
Put up
3.Press downward to assemble.
Pull down
Put up
Pull down
Figure 2
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol,
alcoholetc.
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials andinfluence
the water inlet. Please clean it
Alcohol
Petrol
inner
Th
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
(about 1 hour), then close the top lid.
14
Trouble shooting Answer to question
(If there's breakdown, please pull off the powerplug before checking)The following
phenomena are notbreakdowns sometimes. Pleaseconfirm again beforesending it to
repair. Ifthere are realbreakdowns, please cometo the specialmaintenance department or
after-sale service departmentof our company. Do notrepair it byyourself.
Phenomena
The reason
How to settle
Buzzing upon reservation starts,
Nixie tube indicates "E0"
The top lid is not closed
Close the top lid
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Is the drain hose put down?
No or slow drain, nixie tube
indicates "E1" , buzzing.
Is the drain hose blocked by
foreign material?
Running pauses during spin,
nixie tube indicates "E2",
buzzing
The top cover leaves open
Close the top lid
Re-order the laundries. Closethe
top lid.Level the machinein right
position.
Are the laundries put slantingly?
Is the machine slanting?
Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
"E3", buzzing
Open and close thetop lid once.
Open the water tap.Push
the "Start/Pause" button.
Clean the water inletvalve.
Push the "Start/Pause" button.
Wait for thenormal water pressure
Before use.
The water tap is not open
No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates "E4",
buzzing
The water inlet valve is blocked
The water pressureis too
low and the current is
too small
Poor or no waterfall flow
If the nozzle is choked with
foreign bodies
Remove the foreign bodies
Use it when the power is on.
Is there power failure?
Is the power plug loose?
Insert the power plug tightly.
Affusion to the set water level.
Not wash
The machine does
not act
Does the water level arrive at the
set water level?
Is the power plug loose?
Is the top lid closed?
Insert the power plug tightly.
Close the top lid
Not spin
Are the laundries put orderly?
Put the laundries orderly.
Is the machine slanting?
Level the machine properly.
Re-order the laundries.
There's abnormal sound inside the
machine
Are the laundries slanting in
spinning?
Is the jointer screw of the water
inlet hose is loose or twisted
awry?
Fasten the jointer screw
properly.
The water faucet leaks
15
Packing list
Name
Quantity
Storage position
Inside the document bag
One
User's manual
Components of thewater
inlet hose
Inside the accessory bag
One
Lint filter
Two
Inside the document bag
Bottom plate
Between the upper cushion of the
washing machine package and the
upper seal of the package carton
One
Tapping screws ST4x16
Inside the document bag
Eight
One
Automatic washing machine
16
|