Haier Washer HWMP65 918 User Manual

Automatic Washing Machine User manual  
This manual is for  
HWMP55-918  
HWMP65-918  
Please read this manual  
carefully before using.  
Retain for future  
 
reference.  
Product Overview  
Cold water valve  
Hot water valve  
Top lid  
Detergent box  
Power cord  
Handle  
Lint filter  
(HWMP55-918)  
Balance ring  
Lint filter  
(HWMP65-918)  
Inner tub  
Pulsator  
Back  
cover  
Control panel  
Cabinet  
Fixed leg  
Drain connector  
Drainage  
hose  
Adjustable leg  
Back cover  
Description of symbols  
Contents marked with this symbol are related to the  
safe use of the product and the personal safety of the  
user. Please operate in accordance to the contents of  
this manual, to avoid harm to the user or damage to the  
machine itself.  
Warning sign  
Contents marked with this symbol indicate operations  
or actions that should not be undertaken by the user.  
Performing of such actions may result in injury to the  
user or damage to machine itself, and void warranty.  
Forbidden sign  
SAFETY WARNING  
Please check power socket condition to ensure it has been earthed  
correctly prior to installation to ensure your safety  
1
 
Safety Precautions  
Ensure the plug is removed and the  
A separate, earthed power socket is  
required for the power supply. Hold the  
plug - NOT the electric cable - when  
unplugging the washing machine. Do  
not insert or remove the power plug  
with wet hands.After installation of the  
washing machine, the power plug  
should be accessible.  
taps turned off in the following cases:  
Power failure, cleaning, moving,  
installation and when not in use.  
If power cord or other parts of this  
machine become damaged or  
faulty, please contact a technician  
to have it repaired. DO NOT  
attempt repairs yourself as this  
may cause personal harm or  
void warranty.  
Do not install this appliance in a damp Do not connect to hot water higher  
or wet environment. Do not leave wet  
than 50oC temperature  
laundry on the Control Panel or spray  
water directly on to this appliance, as  
this may cause the washer to  
malfunction  
or cause an  
electrical  
fault.  
Do not wash water-proof clothing  
as this may affect load balance  
during spin cycle(s)  
Do not block the ventilation holes with  
carpet. Ensure carpet does not obstruct  
the opening under the base of the  
The ventilation  
cabinet  
holes at the bottom  
Soft object  
Back  
Front  
If you are using an extension cord or a portable  
electrical outlet device (not recommended),  
ensure that it is positioned so that it does not  
come into contact with water or moisture  
 
Safety precautions  
Do not attempt to move washing or  
place hands inside washing machine  
while in operation. Please ensure  
children are supervised around  
machine to avoid harm.  
Do not wash laundry with chemicals  
or other volatile materials (such as  
petrol, solvents or thinners) as this  
may cause damage  
Do not leave hot or heavy items on lid  
or control panel as this may cause  
damage to the washer or make the  
washer  
to the machine.  
unsafe to  
operate  
Keep washer away from heat  
sources such as heaters, stoves or  
direct sunlight.  
This clothes washer is not intended for use  
by children and persons with reduced  
physical,sensory or mental capabilities, or  
lack of experience and knowledge, unless  
they have been given supervision or  
instruction concerning use of the appliance  
by a person responsible for their safety.  
If power cord or other parts of this machine become damaged or faulty, please  
contact a technician to have it repaired. DO NOT attempt repairs yourself as  
this may cause personal harm or void warranty.  
Check that water faucets are open  
after connection to machine, prior  
to operation and that pipes are  
connected correctly.  
Please remove items such as coins,  
buttons, sand and other solid materials  
from clothing before washing.  
Please use low suds/High  
Efficiency washing powder.  
3
 
Installation & Adjustment  
Please install and adjust the machine according to the directions contained  
in this manual. It is very important to follow these directions for the safe  
operation of the machine, and to ensure your machine operates correctly.  
Install the lint filter  
After removing washer from outer packaging, take  
Model HWMP55-918  
out the lint filter from the document bag, install it to  
the inner tub. See the figure opposite  
Inner tub  
Please ensure the lint filter is installed correctly and  
maintained in good condition to ensure the water outlet is  
Lint filter  
not blocked or the flow altered. If the lint filter is lost or  
damaged, contact Customer Care.  
Model HWMP65-918  
Up  
Dismantle  
Install  
Down  
Install the bottom plate  
The purpose of the bottom plate is to suppress noise  
from the washing machine during operation.  
Steps:  
1. Lay the washer on its back, on a non-abrasive  
surface.  
2. Place the plate on to the bottom of the machine.  
3. Use a screwdriver to tighten the screws ( in  
Screw  
Front  
Two fasteners  
accessory bag) securing the panel to bottom of Back  
the washer.  
4. Once all screws are tight and the panel is  
secure, return the washer to its standing  
position.  
Cparpet  
Bottom plate  
Balance washing machine  
Do not install this machine on an incline greater than 2 . Installing machine on an  
angle or on rough ground will result in unstable running or stoppage of the  
machine. Please adjust it by the following method:  
1.Confirm it is level  
2.Lift up the side of the leg slightly and twist the adjustable leg.  
Note:The distance between the washing machine  
and wall:at least 20 mm.  
20mm  
20mm  
High  
Low  
4
 
Installation of drainage hose  
Install drainage hose  
First connect the drainage hose to the connection point on the lower  
left side of the cabinet, and fasten with drain hose hoop (provided).  
Connect drain hose guide on to the outside of drainage hose. To guide  
the drain hose over the tub or standpipe the hose guide MUST be fitted  
to the drain hose  
Drain hose neck guide  
Drain hose hoop  
Drain hose joint  
Placement of Drainage Hose  
The height of the standpipe or tub should be between 850 - 1200 mm.  
To avoid syphoning, the drain hose should not extend more than 20 mm  
from the end of the guide.  
Ensure drainage hose is held in place  
to avoid leaks or spills.  
0.85m  
h
1.2m  
5
 
Installation of water inlet hoses  
NOTE: Use the new inlet hoses supplied, do not reuse  
old hoses.  
1. Insert a new flat washer into each end of the inlet hose.  
2. Connect the water inlet hose to the water faucet. You may have  
to use pliers to tighten the coupling. Do not over tighten as this may  
cause damage to the valve or hose fittings.  
3. Connect the other ends to their respective cold and hot water inlet valves  
located on the top of the washer.  
Nut of the water inlet hose  
Water absorption cushion  
to Joiner of the water inlet valve  
4. Fasten each hose on the washing machine, and ensure a tight connection.  
Check the inlet hose connections  
1. Swing the hose gently to confirm that the hose is  
securely fastened.  
2. After installation, open the tap to check for leaks.  
3. Do not bend the hose unduly.  
4. Periodically check the hose connections are firm  
at both ends. This is to ensure the connections  
remain watertight over time.  
Removing the water inlet hoses  
1. Turn off the water taps.  
2. Loosen each connection at faucet and washer.  
3. Carefully remove each hose separately, as they may contain residual water.  
6
 
Before washing  
Preparation  
1. Ensure the water inlet hoses are correctly installed and  
faucets are turned on.  
2. Insert the power plug into the electrical socket.  
3. Ensure the drain hose is mounted at the correct height.  
4. Select a suitable location for the washer on a hard, even  
Surface, away from direct sunlight or heat sources,  
e.g. Radiators/heaters,  
cooking, appliances etc.  
5. Any floor unevenness may  
0.8m  
H
1.2m  
result in unstable working or  
abnormal noise. Please ensure  
the machine is level.  
Check the following before washing  
When the machine is  
running, buttons may  
cause noise. To  
reduce the noise, turn  
clothes inside out or  
place them in a laundry  
bag.  
Tie any long  
Straps or strings,  
fasten buttons  
and close  
Clear the Pockets,  
and take out loose  
items such as  
coins, sand,  
The weight of the  
laundry shall not  
exceed the rated  
capacity of your  
machine Loosen  
the laundry before  
placing it evenly  
in the tub  
Check if the  
laundry has  
any special  
washing  
zippers  
hairpins etc.  
instructions  
a. Check if the laundry is suitable for machine washing.  
b. divide the laundry into colour fast and non-colour fast items.  
c. separate items that do not absorb water easily and wash by hand.  
d. for heavily soiled items, please first remove loose dirt, then apply detergent  
directly (as per instructions on pack) to the stain before washing.  
e. for those items that may attract lint or are furry or fluffy, please turn inside out before  
washing.  
f. do not put laundry soiled with chemicals or solvents into the washing machine  
7
 
Load the laundry  
The rated washing capacity refers to the largest dry  
weight of a load that can be washed.  
The thickness, size and type of clothes will influence  
the actual capacity.  
Do not select more than Water Level  
4
for clothes  
less than 1.0kg, to avoid splashing of water.  
It is recommended that low suds/High efficiency  
detergent is used.  
Detergent Usage Guide  
Adding washing powder  
It is suggested to dissolve detergent before adding to  
the tub, see as below:  
1. Prepare warm water (<35 C) in a container.  
2. Add washing powder, stirring to dissolve it completely.  
Adding washing powder Fuzzy Logic Programs  
Add washing powder/liquid into the detergent box directly  
for "Fuzzy logic" programs and "Delay" program.  
Adding washing powder Normal Wash  
How to use Bleach/whitener  
It is recommended that washing powder/liquid is dissolved  
with water and then directly emptied into the washing  
machine: (not applicable for Fuzzy Logic and Delay program)  
1. Add some water (select the "1" water level)  
2. Add washing powder/liquid. Run for about 30s to fully  
dissolve the detergent. Then push the "Start/Pause" button  
to pause the wash cycle.  
Always refer to the bleach/  
whitener instructions prior  
to usage  
Fill water to desired level.  
Dilute the bleach/whitener  
in a container. Pour it  
slowly into the washing tub.  
Avoid using whitener on  
laundry with colour or  
patterns as they are prone  
lose colour.  
3. Load laundry. Select suitable water level. Push the  
"Start/Pause" button again to recommence washing cycle  
If you select "Quick"program, it is recommended to use  
liquid detergent instead of washing powder to ensure the  
most effective wash results.  
Old or poor quality washing powder may causing caking in  
tub or detergent dispenser.  
The bleach/whitener should  
NOT be directly applied  
to laundry directly.  
Clean the detergent box periodically to ensure washing  
power is evenly distributed and remove any detergent  
buildup.  
Note: For best wash performance, use low suds/High  
Efficiency detergent and dissolve the detergent in <1L  
warm water prior to mixing with laundry.  
Close the lid  
If you open the lid during spin cycle the machine will stop and an audible  
alarm will sound.  
8
 
Operation & Wash Cycles  
Minutes Remaining  
Long  
G
Medium  
Rapid  
Delay(Hours)  
Express  
E
A
B
C
D
F
Indicator display  
Off  
On Indicates the program is about to run and indicates the selected cycle and options  
Flashing Indicates the program is running and indicates the selected cycle and options  
Remaining time display  
Displays  
-
during Fuzzy Logic detection cycle until level is determined  
Displays total remaining during current, in progress wash cycle  
Displays remaining time when the "Delay" program is used (hours).  
Displays error codes (see page 15)  
15  
A
Cycle button  
Program  
Recommended for  
Normal  
Recommended for mixed fabrics and general clothing items  
Heavy  
Delicate  
Quick  
Items that are soiled or items that are heavy/big  
Delicate items that are machine washable  
Lightly soiled or small laundry loads less then 1.5kg  
This cycle setting remembers the last wash, rinse and spin settings  
(Water level will not be remembered as it is determined by fuzzy  
logic function).  
Memory  
Synthetic  
Wool  
Ideal for synthetic fabrics  
Machine washable woollen items  
Dries the inner and outer tub to avoid the growth of mildew  
Tub dry  
9
 
Operation & Wash Cycles  
B
Wash  
Rinse  
Spin button  
You may change the Wash, Rinse and Spin times when Memory , Heavy Normal and  
Synthetic cycles are selected.  
When the Wool cycle has been selected you cannot change the Wash, Rinse and  
Spin times.  
You can not change the Wash Rinse and Spin times when Tub dry and Quick cycles  
are selected.  
C
Delay button  
The display shows the time remaining (in minutes) before the cycle will finish.  
Push the "Delay" button and the display will show the remaining time for the cycle to  
finish (in hours). The indicator flashes to indicate that the delay function is operating.  
Delay start can be set for 2-24hr operation.  
NOTE: The delay time is until the selected wash program finishes (you will need to  
deduct wash time from this delay time to calculate when the wash will start).  
D
Water Level button  
During the Memory and Synthetic programs the washing machine will detect the size  
of the laundry and automatically select the water level between levels 4, 6, 8 or 10.  
To change the water level, press the Start/Pause button and make your selection  
by pressing the Water Level button until desired level is shown (1-10).  
If there is water inside the tub and the machine cannot detect the laundry load, it will  
display water level "6". If wet laundry is put in the machine, it will display level "3",  
you can then manually adjust to the desired water level.  
If Quick program is selected it will display water level  
adjust to the desired water level.  
3
you can then manually  
If Tub Dry program is selected the water level cannot be manually overridden.  
During operation of the wash, or rinse program, you can adjust the water level by  
pressing the Water Level button.  
The water level may vary due to the different moisture level of the laundry items.  
10  
 
Operation & Wash Cycles  
E
F
Temp(Wash/Rinse  
button  
Press the Temp(Wash/Rinse)" button to select your wash temperature.  
During Quick cycle, the water temperature is preset. Temp button does not work  
During wool cycle, the "hot/cold" water temperature cannot be chosen.  
START/PAUSE button  
After the power is switched on press the Start/Pause button to start the machine.  
During operation, push the Start/Pause button to pause the machine.  
Push the Start/Pause button again to restart the machine.  
G
POWER button  
To turn on/off the power, press the power button.  
If the start pause button is not pushed within 5 minutes, the washing machine will automatically  
switch off the power  
Button Operation and Descriptions  
Press the  
button to switch power on/off  
1
2
POWER  
Cycle  
Press the  
button to select automatic program  
When the power is switched on "Normal" cycle is automatically set. To select  
a different automatic cycle, press the "Cycle" button till the corresponding  
indicator is on. Refer to the section on the "Cycle" button above.  
E.g choose "Quick" cycle for a small load of lightly soiled laundry.  
When the "Synthetic", Memory cycles are selected the Fuzzy  
Logic program is run. The washing cycle is automatically set while the water  
level and wash time can be selected according to the texture and size of the load.  
11  
 
Operation & Wash Cycles  
Spin  
Wash  
Rinse  
Press the  
buttons to customise the pre-set options  
3
4
Even there is no water in the tub a certain period is required before spinning  
Separate colour fast clothes before loading washing machine.  
During Rinse cycle, only SPIN times can be set, all other wash functions are locked.  
During Wool and Tub Dry cycles, these settings cannot be changed and buttons will  
not function, as machine will only follow pre-programmed settings.  
Water  
Level  
Press the  
button to change the water level  
For the "Synthetic"and "Memory" cycles the machine will run a Fuzzy Logic program  
that automatically detects the type of laundry in the tub. After detection  
it will set the water level automatically.  
The water level can only be changed once the machine has started by pushing the  
"Start/Pause" button, then push the "Water Level" button to reset the water level.  
Press the "Start/Pause" button to resume the wash cycle  
Temp  
Press the  
button to select the the wash and rinse temperature  
Wash/Rinse  
5
6
Set the wash and rinse temperatures in accordance to the requirements of each  
load. The wash and rinse temperatures will be the same (i.e. if Warm/Cold  
is selected, both wash and rinse cycles will be warm/cold).  
Delay  
Press the  
button to select the delay wash program  
The delay time program is automatically off, and wash cycles will start as soon as  
Start/Pause button is pushed.  
To set a delay time, first select the Cycle and options required and push the  
Delay" button  
The cycle indicator lights will go off and the "Delay (Hours) indicator light will be on.  
During the delay program, press the "Delay" button to display the time remaining.  
The delay time indicator shows the time remaining till the wash ends.  
To cancel the delay program, switch the power off and back on, then make a new  
selection.  
Delay start (2-24hr) option  
Delay time is to the end of washing washing cycle  
The wash will finish  
in about 18 hours  
12  
 
Operation & Wash Cycles  
Press the  
button to start the cycle  
Start/Pause  
7
If the top lid is opened while machine is in SPIN cycle, the machine will stop  
and an audible alarm will sound.  
Note  
The energy test program was performed using the "Normal"  
cycle default setting of:  
Wash "Long"  
Rinse:1 Rinse  
Spin:7 mins  
Water level:10.  
Please use low suds/high efficiency detergent.  
Cycle completed  
When the machine has completed the selected/current wash cycle an audible  
alarm will sound and the machine will switch off automatically  
13  
 
Maintenance  
Remove the power plug before carrying out any cleaning or maintenance.  
Clean the lint filter(s) and detergent box after each wash.  
The lint filter must be used during  
washing.  
Remove and clean the detergent  
It must be cleaned after each use  
box, replace after cleaning.  
Lint filter:  
1. Slide upwards to remove.  
2. Gently push it down to install;  
ensuring it is in place before  
next wash.  
Directions for cleaning lint filter on model HWMP55-918  
remove  
Install  
Dismantle  
Install  
Directions for cleaning lint filter on model HWMP65-918  
Dismantle  
Dismantle  
Install  
Install  
The front cover of lint filter  
If the cabinet is dirty, wipe it with a damp  
cloth.  
Do not wash directly with water.  
Wipe with a neutral detergent (please  
check directions on detergent bottle  
first).  
The filter at the water inlet valve may  
become blocked by impurities in the  
water supply. Clean it with a plastic  
bristled brush every two months.  
Do not wipe machine with thinners,  
petrol, alcohol or other harsh solvents.  
l
ro  
r
e
et  
P
n
in  
h
T
Alcohol  
1. After washing cycle has finshed, turn off the water faucet. (If needed, you can  
remove the water inlet hose).  
2. Do not store water in the washing machine for a long period without completing  
a wash cycle. Drain the water completely after each wash.  
3. Hang up the power cord and drain hose.  
4. Wipe up any drops of water on the surface of the machine and inside the tub.  
Leave the lid open for about 1 hour after each wash to evaporate any residual  
water.  
14  
 
Trouble-shooting  
If there is a fault or the machine does not operate correctly, remove the power plug  
before checking the machine. Using diagnostic list below, please check the machine  
requires repair. If a repair is required, please contact our Customer Care Team, do  
not try to fix it yourself.  
Problem  
Possible causes  
What to do  
The machine does not  
drain or drains slowly.  
The display shows E1.  
Remove the blockage.  
Open and close the top  
lid once.  
Is the drain hose  
blocked?  
The machine stops  
running. The display  
shows E2.  
The top lid is not closed.  
Close the top lid.  
Redistribute the load evenly.  
Close the top lid.  
Level the machine. The  
machine will start 10.  
seconds after being leveled  
correctly.  
Has the laundry been  
place unevenly in the  
machine?  
The machine does not  
spin. The display shows  
E3..  
Is the machine level?  
Open the water tap. Push  
the Start/Pause button once.  
Clean the water inlet valve  
then push the Start/Pause  
button once.  
Is the water tap closed or  
has the water supply been  
interrupted?  
Is the water inlet valve  
blocked?  
The display will show  
E4.  
Use after the water pressure  
is normal.  
Is the water pressure too  
low?  
Please contact Customer  
Care.  
The water level sensor  
has failed.  
The display shows E6.  
Wait for the power supply  
to be restored.  
Insert the power plug  
tightly.  
Wait for water to fill to the  
preset level.  
Is there a power failure?  
Is the power plug inserted  
tightly?  
Has the water level reached  
preset position?  
Will not  
wash  
The machine  
does not  
work.  
Is the power plug inserted  
tightly?  
Is the top lid closed ?  
Is the laundry distributed  
unevenly in the machine?  
Insert the power plug  
tightly.  
Close the top lid.  
Redistribute the laundry.  
Will not  
spin  
Is the machine level?  
Redistribute the load evenly.  
Close the top lid.  
Level the machine.  
There are abnormal  
sounds inside the  
machine.  
Has the laundry been placed  
unevenly in the machine?  
Are there any foreign objects  
inside the bowl?  
Remove the foreign object.  
Is the water inlet hose  
loose?  
Fasten the inlet hose.  
The water tap leaks.  
15  
 
Common occurrences  
Situation  
Cause  
The spinning is intermittent after  
it starts.  
Redistribute the load evenly.  
Close the top lid.  
The wash procedure pauses.  
The cloth sensor is detecting , it will add  
water after about 48 senconds.  
The program is setting the drain time, there  
will be a pause before the spin program  
starts.  
Select spin program, but it does  
not work.  
It maybe residual water after performance  
inspection by the factory.  
There maybe water in the  
drain hose in when first used.  
16  
 
Packing list  
Name  
Quantity  
One  
Storage position  
Automatic washing  
machine  
Bottom plate  
Between the upper cushion of the  
washing machine package and the  
upper seal of the package carton.  
One  
Inside the document bag  
Inside the document bag  
One  
One  
User manual  
Warranty card  
Lint filter  
( HWMP55-918)  
Inside the document bag  
Inside Accessory bag  
One  
One  
Tapping screws  
Components of the  
water inlet hose  
Connect to the  
Inside Accessory bag  
Two  
washing machine  
Connect  
to the tap  
Inside Accessory bag  
One  
One  
One  
Drain hose  
Inside Accessory bag  
Inside Accessory bag  
Drain hose Guide  
Drain hose Clamp  
17  
 
Specifications  
Fully Automatic Washing Machine  
Type  
HWMP55-918  
220-240V  
380W  
Model  
HWMP65-918  
220-240V  
390W  
50Hz  
Rated voltage/frequency  
Rated washing power  
Rated spinning power  
Net weight  
50Hz  
340W  
350W  
About 32.5kg  
About 37.5kg  
About 36.5kg  
About 41.5kg  
Gross weight  
L 520 W 530 H 900  
Dimensions (mm)  
L 550 W 560 H 955  
Water level/Water  
Quantity(approx)  
1/14 L 2/18L 3/22L  
4/26L 5/30L 6/34L  
7/38L 8/43L 9/47L  
10/52L  
1/18L 2/24L 3/30L  
4/36L 5/42L 6/48L  
7/54L 8/60L 9/65L  
10/70L  
Water inlet pressure  
0.03MPa-1.0MPa (when water temperature is  
50 , the water inlet pressure of hot water  
shall not exceed 0.4MPa)  
Note Default settings when you choose this program after power on  
Item  
Water level  
10  
Spin  
Temp  
Time  
Rinse  
Wash  
Long  
Cycle  
97 Min(HWMP55-918)  
7 Min  
1 Rinse  
Warm/Cold 107Min(HWMP65-918)  
Normal  
Warm/Cold  
76 Min  
6
6
Long  
7 Min  
5 Min  
3 Min  
Heavy  
2 Rinses  
2 Rinses  
Warm/Cold  
34 Min  
Rapid  
Express  
Delicate  
Quick  
Warm/Cold  
10 Min  
3
1 Rinse  
Memory  
Synthetic  
Wool  
This cycle setting remembers the last wash, rinse and spin settings  
6
/
5 Min  
Express 2 Rinse 3 Min  
Medium 1 Rinse  
Warm/Cold  
6
/
Cold/Cold  
/
25 Min  
53 Min  
/
/
/
Tub dry  
18  
 

Graco Car Seat PD204108A User Manual
Graco High Chair PD162118B User Manual
Graco Water Pump 3A2888A User Manual
Gravely Barcode Reader 927060 RM1028 User Manual
Heat Controller Air Conditioner PE 91A PE 121A User Manual
Honeywell Work Light DR4300 User Manual
Hotpoint Range RGB746DEP User Manual
HP Hewlett Packard Computer Accessories QR516B User Manual
IBM Network Card EM78P221 2N User Manual
iHome Headphones IH H400AB User Manual