Harbor Freight Tools Outdoor Cart 44599 User Manual

200 LB. Capacity Wood Cart  
Model 44599  
ASSEMBLY AND OPERATING INSTRUCTIONS  
3491 Mission Oaks Blvd., Camarillo, CA 93011  
Copyright © 2000 by Harbor Freight Tools®. All rights reserved. No portion of this  
manual or any artwork contained herein may be reproduced in any shape or form  
without the express written consent of Harbor Freight Tools.  
For technical questions and replacement parts, please call 1-800-444-3353  
 
9. Stay alert. Watch what you are doing, use common sense. Do not operate  
any product when you are tired.  
10. Check for damaged parts. Before using any product, any part that appears  
damaged should be carefully checked to determine that it will operate  
properly and perform its intended function. Check for alignment and binding  
of moving parts; any broken parts or mounting fixtures; and any other  
condition that may affect proper operation. Any part that is damaged should  
be properly repaired or replaced by a qualified technician.  
11. Do not operate product if under the influence of alcohol or drugs.  
Read warning labels on prescriptions to determine if your judgment or  
reflexes are impaired while taking drugs. If there is any doubt, do not operate  
the product.  
Warning:The warnings, cautions, and instructions discussed in this instruc-  
tion manual cannot cover all possible conditions and situations that may oc-  
cur. It must be understood by the operator that common sense and caution  
are factors which cannot be built into this product, but must be supplied by  
the operator.  
Unpacking  
When unpacking, check to make sure all parts shown on page 4 are included. If  
any parts are missing or broken, please call Harbor Freight Tools at the number  
on the cover of this manual.  
Assembly Instructions  
NOTE: All parts below refer to the parts listed on page 4 of this manual.  
1. As shown in the diagram on page 5, position the U-Handle [1] inside the  
grooves of the Axle & Frame [4]. Attach the U-Handle to the Axle & Frame  
using two Bolts [10] on each side of the U-Handle. Add Washer (14) and  
secure the Bolts with Nuts [13] provided.  
2. Position the Left Frame [7] inside the left groove of the Axle & Frame,  
opposite the end with the U-Handle attached. Secure the Left Frame using  
two Nuts and Bolts as shown in the diagram. Repeat for the Right Frame [8].  
3. Attach the Bracket [9] to the Left and Right Frame pieces using the  
remaining Nuts and Bolts. Be sure that the folded edge of the Bracket points  
in toward the U-Handle.  
4. To attach the Wheels [3], slide one of the Bushing [5] pieces over the Axle  
[11], followed by one of the Wheels. Secure the Wheel using a Washer [2]  
and Cotter Pin [6]. Repeat for the other Wheel.  
5. Insert Caps [12] into the open ends of the tubing in the U-Handle, and the  
Left and Right Frame pieces.  
SKU 44599  
Page 3  
REV 12/03  
 
Operation  
Use your woodcart to carry heavy loads of firewood or other objects without having  
to make multiple trips. Place objects in holding area between the handle and the  
bracket. As always, be careful when lifting heavy objects, and do not attempt to  
carry objects weighing more than 200 lbs. with this product.  
Parts List  
No.  
1.  
2.  
Description  
U-Handle  
Washer  
Qty.  
1
2
20  
3.  
Wheel Kit  
2
4.  
5.  
Axle & Frame  
Bushing  
1
2
6.  
7.  
8.  
9.  
Cotter Pin  
Left Frame  
Right Frame  
Bracket  
2
1
1
1
10.  
11.  
12.  
13.  
14.  
Bolt M6 x 35  
Axle  
Cap  
Nut M6  
Flat Washer 6M  
12  
1
4
12  
12  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM  
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER  
NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO  
THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE  
PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE  
PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY  
STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN  
BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER  
ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE  
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS  
OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
SKU 44599  
Page 4  
REV 12/03  
 
Assembly Drawing  
14  
NOTE: Some parts are listed and shown for illustration purposes only and are not  
available individually as replacement parts.  
SKU 44599  
Page 5  
REV 12/03  
 

Grizzly Switch h8245 User Manual
Hand Held Products Scanner IT3800 User Manual
Hasbro Board Games Hunchback of Notre Dame User Manual
Hasbro Games Telephone Fun Smart Sticks User Manual
Honeywell Thermostat AC 140 7 User Manual
Hoshizaki Ice Maker AM 50BAE User Manual
Hotpoint Dishwasher Dishwasher User Manual
HP Hewlett Packard Calculator 49g+ User Manual
HP Hewlett Packard Computer Drive 469988 009 User Manual
Ikelite Camcorder Accessories 12 User Manual