INSTALL INSTRUCTIONS C-TTB-CV
HALF SIZE TRUNK TRAY
1995-2008 FORD CROWN VICTORIA
TOOLS REQUIRED:
Ratcheting wrench
Sockets - 7/16”, #10, #8
Screwdriver set
Wrench – 7/16”
HARDWARE:
ITEM# QTY DESCRIPTION
PART #
1
2
3
4
5
1
1
1
1
Passenger side front foot
Driver side front foot
Support plate
Driver side rear foot
Passenger side rear foot
¼” Flat washer
¼” Serrated nut
¼” x ¾” Hex head bolt
8-32 Keps nut
S-1-000958
S-1-000959
S-1-000964
S-1-TA001HBS1-006A
S-1-TA001HBS1-006B
GSM31005
GSM30023
GSM33001
1
11
11
5
4
GSM30027
Always!
ꢀ Read all instructions before installing any Havis-Shields Equipment Corp products.
ꢀ Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!
ꢀ Use hardware provided with install kit
(Bolts to back seat wall)
(Attaches w/ 8-32 keps nuts)
(Attaches w/ ¼” serrated nuts)
(Attaches w/ 8-32 keps nuts)
(Attaches w/ ¼” serrated nuts)
|