Havis Shields Telescope C TCB 21 User Manual

INSTALL INSTRUCTIONS C-TCB-21  
TELESCOPING COMPUTER BASE  
1998-2003 DODGE DURANGO  
TOOLS REQUIRED:  
3/16” Allen wrench  
3/8” Standard socket set  
3/8” Metric socket set  
Ratcheting wrench (3/8” drive)  
Powered drill w/ 3/16” drill bit  
Open-end wrench set  
HARDWARE & COMPONENTS:  
QTY DESCRIPTION  
PART #  
1
1
1
1
1
2
Pole support assembly  
Telescoping pole assembly  
Side support brace  
5/16-18 Nylock nut  
5/16” Flat washer  
CM93071-21  
CM93072-3  
CM93146  
GSM30017  
GSM31006  
GSM33060  
¼” x 1” Hex head lag bolts  
Always!  
Read all instructions before installing any Havis-Shields Equipment Corp products.  
Check for obstructions (Wire, brake lines, fuel tank, etc.) before drilling any holes!  
Use hardware provided with install kit  
Side support  
brace  
¼” x 1”Hex  
head lag bolts  
Telescoping pole  
assembly  
Pole support  
assembly  
5/16-18  
Nylock nut  
Location of  
passenger side factory  
seat base bolts  
C-TCB-21-INST-12-04  
 

Grizzly Cordless Saw w1702 User Manual
Grizzly Saw G0734 User Manual
Haier Clothes Dryer HDM35 1 User Manual
Haier Microwave Oven HDE 2580EGB User Manual
Hamilton Beach Toaster 2 Slice Toaster User Manual
Honeywell Fan HF 810 User Manual
Hotpoint Stove 6440 User Manual
IBM Computer Monitor 21L4364 User Manual
Icom Two Way Radio iF22SR User Manual
Image Treadmill 850SE User Manual