Honeywell Plumbing Product GSS Series User Manual

GSS Series  
GlobalSafetySwitch  
FEATURES  
EN 50041 and EN 50047 mounting and  
characteristics  
Designed to IEC electrical standard for  
world-wide use in guarding applications  
Positive opening operation of NC  
(Normally Closed) contacts conforming  
to IEC /EN 60947-5-1-3  
Available with a wide range of positive  
opening contacts  
Rugged housing (Zinc Die-cast)  
Tamper resistant design uses TORX®  
head security screw  
Full range of actuator heads and levers  
suitable for safety applications  
Sealing up to IP 67, NEMA 1, 4, 12 & 13  
Snap action and slow action basic  
switches  
GSS Series products may be used alone as Category 1 per EN 954-1 safety compo-  
nent. In conjunction with other safety switches and our complete range of safety  
control modules, it is possible to construct comprehensive protection schemes  
with Category 2, 3 or 4 compliance per EN 954-1.  
International conduit sizes  
Galvanically isolated contacts  
UL listed; CSA and CE certified, BG  
approved  
Red body colour for easy safety  
recognition  
Honeywells design experience has resulted in a brand new patented concept in  
safety switching techniques. The sequential safety switch incorporates positive  
opening on the downward stroke of each NC sequence point. This allows the user to  
have both a warning signal and a stop signal. With this information a door can be  
closed before it stops a machine or settings adjusted to stop excessive movement  
thus avoiding down time.  
BENEFITS  
Standard mounting and characteristics  
Globally available and accepted  
Welded NC contacts will separate vital  
security in safety applications  
Range of actuation methods for  
detecting safety conditions in guarding  
and machine status applications  
Wiring and body flexibility  
Suitable for inductive switching and  
safety relay interfaces  
LOW ENERGY SWITCHING  
In todays demanding age of low energy controls, electromechanical switches are  
frequently used to interface directly with safety relays, PLCs and other low energy  
devices. To accommodate this requirement GSS offers gold plated contact versions  
of the standard basic switch. This improves reliability of switching at low currents  
and voltages, by protecting the contact surfaces from contamination during opera-  
tion or storage prior to use.  
Standard silver contacts have a disadvantage in that the contact surface may tar-  
nish under certain environmental conditions e.g. in the presence of moisture.  
Signalling and power/safety circuits may  
be different polarities or voltages  
Immediately recognisable in the  
application as a safety component  
Low energy basic switches are rated as follows:  
Operating Voltage U  
1 to 50 Vac or Vdc  
e
Operating Current Ie  
1 µA to 100 mA  
!
WARNING  
MISUSE OF DOCUMENTATION  
The information presented in this product sheet (or catalogue) is for reference only. DO NOT USE this document as system  
installation information.  
Complete installation, operation and maintenance information is provided in the instructions supplied with each product.  
Failure to comply with these instructions could result in death or serious injury.  
GSS Series  
Industrial Safety Products •  
197  
 
Actuator Types  
Additional Lever Types  
For use with all Side Rotary Head Styles.  
Figure 1 illustrates standard lever types which conform to EN 50041.  
All dimensions are in mm / in  
20 /  
0.79  
OP  
85˚  
30˚  
GSA  
A1B  
20 /  
0.79  
67 /  
2.64  
56 /  
2.2  
ø19,1 /  
0.75  
6,4  
0.25  
52 /  
2.05  
Additional  
levers  
available  
(see page 208)  
38,1 /  
1.5  
85˚  
85˚  
70 /  
2.76  
Side Rotary, metal roller  
20 /  
0.79  
37,5 /  
1.48  
B
C
Side Rotary Roller Lever  
A1B Metal Roller  
Figure 1  
Top pin plunger  
±2,5  
±0.1  
15 /  
0.59  
OP  
FP  
DP  
20 /  
0.79  
30˚  
ø12,4 /  
0.49  
58 /  
2.28  
44 /  
1.73  
50,5 /  
1.99  
Top roller plunger  
47  
XXX  
GSS Series  
Industrial Safety Products •  
199  
 
Slow-Action Contacts  
3 NORMALLY CLOSED/  
1 NORMALLY OPEN  
BREAK BEFORE MAKE  
Actuator Types  
11  
21  
31  
12  
22  
32  
2Y  
Zb  
43  
44  
20  
32  
20 /  
0.79  
-3,6  
11-12  
21-22  
31-32  
43-44  
OP  
85˚  
30˚  
A1B  
20 /  
0.79  
67 /  
2.64  
52 /  
2.05  
OT  
*
(R.P.)  
(D.T.)  
(*)  
(F.P.) 0°  
(O.P.1) 26°  
(O.P.2) 32°  
38°  
(O.T.) 71° to 85°  
Side Rotary, metal roller  
37,5 mm  
35 mm  
34 mm  
37,5 /  
1.48  
B
C
33 mm  
*
30,5 mm  
OT  
(MAX)  
Top pin plunger  
±2,5  
±0.1  
15 /  
0.59  
OP  
11,3  
15  
18,3  
FP  
30˚  
DP  
20 /  
0.79  
11-12  
21-22  
31-32  
43-44  
ø12,4 /  
0.49  
58 /  
2.28  
44 /  
1.73  
50,5 /  
1.99  
16,8  
OT  
*
Top roller plunger  
Low Energy Contacts  
Note: See page 197  
47  
XXX  
GS  
200  
Industrial Safety Products •  
GSS Series  
 
GSS Series  
Industrial Safety Products •  
201  
 
Snap-Action Contacts  
1 NORMALLY CLOSED/  
1 NORMALLY OPEN  
Slow-Action Contacts  
GSC EN 50047  
SafetyMetal  
Standard  
2 NORMALLY CLOSED  
13  
14  
22  
21  
11  
22  
Zb  
Technical Data  
2Y  
21  
Mechanical  
life  
up to 15 million  
operations  
Circuit closed  
*Positive opening to IEC/EN 60947-5-1-3  
12  
Degree of  
protection  
IP 66  
NEMA/UL  
type 1, 4, 12, 13  
15 mm 36,5  
-4,4  
FP  
15 mm  
OP  
43,3  
-4,4  
FP  
0˚  
(F.P.)  
21-22  
13-14  
21-22  
11-12  
(O.P.) 26˚  
(R.P.) 14,5˚  
(D.T.) 11,5˚  
OT  
Temperature Operating:  
range  
OT  
*
DT = 9,8 mm  
-25 °C to +85 °C /  
-13 °F to +185 °F  
Storage:  
-40 °C to +85 °C /  
-40 °F to +185 °F  
*
(F.P.) 0˚  
(O.P.) 26˚  
(R.P.)  
(D.T.)  
21-22  
13-14  
( )  
*
54˚  
( )  
*
46,5˚  
(O.T.) 61˚ to 75˚  
RP = 5,2 mm  
(O.T.) 61˚ to 75˚  
Approvals*  
IEC 60947-5-1  
EN 60947-5-1  
ac15 A300  
FP  
FP  
DT =  
0,9 mm  
21 mm  
18 mm  
21 mm  
dc13 Q300  
BG, UL & CSA  
18,9 mm  
RP  
OP 18 mm  
Vibration  
Shock  
10 g conforming to  
IEC 68-2-6  
16,5 mm  
15 mm  
*
16 mm  
15 mm  
*
50 g conforming to  
IEC 68-2-27  
OT  
OT  
(max.)  
(max.)  
Terminal marking to EN 50013  
10,5  
5,3 mm  
13,9  
21-22  
13-14  
10,5  
13,5  
*See Standards (page 179)  
5,3 mm  
21-22  
11-12  
FP  
OT  
*
1,6 DT  
Dimensions in mm / in  
OT  
FP  
21-22  
13-14  
22 /  
0.87  
*
20 /  
0.78  
24,75 /  
0.97  
8,9 RP  
3 /  
0.12  
2,15 /  
0.08  
R
55 /  
2.16  
30,5 /  
1.20  
3,5 /  
0.138  
14,5 /  
0.57  
30 /  
1.18  
* Point from which the positive opening is assured  
conduit  
thread  
19,8 /  
0.78  
Conduit  
Thread  
** Positive opening occurs at operating position. But to meet IEC/EN 60947-5-3  
which requires a dielectric gap of 2,5 kV, positive opening is assured at*.  
ø 23 /  
ø 0.9  
= 1/2" NPT  
A
Note: Incorporates safety screws  
= 20 mm  
C
01  
Low Energy Contacts  
Note: See page 197  
36  
Ordering:  
GSC  
X
XX  
Example: GSC C 01 B  
202  
Industrial Safety Products •  
GSS Series  
 
Actuator Types  
Additional Lever Types  
For use with all Side Rotary Head Styles.  
All dimensions are in mm / in  
Figure 2 illustrates standard lever types  
which conform to EN 50047.  
15 ± 3 /  
0.39 ± 0.8  
DT  
OP  
75˚  
20 /  
0.79  
30˚  
GSC  
A1B  
ø19 /  
0.748  
45 /  
1.77  
40 /  
1.57  
Additional  
levers  
55 /  
2.17  
40 /  
1.58  
6 /  
0.24  
available  
ø19 /  
27 /  
0.74  
(see page 208)  
1.07  
75˚  
75˚  
Side Rotary, metal roller  
46,5 /  
1.83  
ø 9,9 /  
0.39  
DT  
FP  
21 /  
15 /  
0.59  
OP  
OT  
(max.)  
0.827  
B
C
18 ± 0,5 /  
0.709  
15 /  
0.591  
Figure 2  
Side Rotary Roller Lever  
A1B Metal Roller  
Top pin plunger  
10 ± 1,5 /  
0.394  
OP  
DT  
30˚  
20 /  
0.787  
ø12,4 /  
0.49  
35 /  
25 /  
0.984  
1.378  
Top roller plunger  
XXX  
Industrial Safety Products •  
203  
GSS Series  
 
Snap-Action Contacts  
1 NORMALLY CLOSED/  
1 NORMALLY OPEN  
Slow-Action Contacts  
GSD EN 50047  
SafetyDoubleInsulated  
Standard  
2 NORMALLY CLOSED  
13  
14  
22  
21  
11  
22  
Zb  
2Y  
Technical Data  
21  
12  
Mechanical  
life  
up to 15 million  
operations  
Circuit closed  
*Positive opening to IEC/EN 60947-5-1-3  
Degree of  
protection  
IP66  
NEMA/UL  
type 1, 12, 13  
15 mm 36,5  
-4,4  
FP  
15 mm  
OP  
43,3  
-4,4  
FP  
0˚  
(F.P.)  
21-22  
13-14  
21-22  
11-12  
(O.P.) 26˚  
(R.P.) 14,5˚  
(D.T.) 11,5˚  
OT  
Temperature Operating:  
range  
OT  
*
DT = 9,8 mm  
-25 °C to +85 °C /  
-13 °F to +185 °F  
Storage:  
-40 °C to +85 °C /  
-40 °F to +185 °F  
*
21-22  
13-14  
(F.P.) 0˚  
(O.P.) 26˚  
(R.P.)  
(D.T.)  
( )  
*
54˚  
( )  
*
46,5˚  
(O.T.) 61˚ to 75˚  
RP = 5,2 mm  
(O.T.) 61˚ to 75˚  
Approvals*  
IEC 60947-5-1  
EN 60947-5-1  
ac15 A600  
FP  
FP  
DT =  
0,9 mm  
21 mm  
21 mm  
18 mm  
dc13 Q300  
BG, UL & CSA  
18,9 mm  
RP  
OP 18 mm  
Vibration  
Shock  
10 g conforming to  
IEC 68-2-6  
16,5 mm  
15 mm  
*
16 mm  
15 mm  
*
OT  
50 g conforming to  
IEC 68-2-27  
OT  
(max.)  
(max.)  
Terminal marking to EN 50013  
10,5  
5,3 mm  
21-22  
13,9  
10,5  
13,5  
5,3 mm  
13-14  
*See Standards (page 179)  
Dimensions in mm / in  
21-22  
11-12  
FP  
OT  
*
1,6 DT  
OT  
FP  
21-22  
13-14  
22 /  
*
0.87  
20 /  
0.78  
24,75 /  
0.97  
8,9 RP  
3 /  
0.12  
* Point from which the positive opening is assured  
2,15 /  
R
0.08  
55 /  
2.16  
** Positive opening occurs at operating position. But to meet IEC/EN 60947-5-3  
which requires a dielectric gap of 2,5 kV, positive opening is assured at*.  
30,5 /  
1.20  
3,5 /  
0.138  
14,5 /  
0.57  
30 /  
1.18  
conduit  
thread  
19,8 /  
0.78  
Conduit  
Thread  
ø 23 /  
ø 0.9  
= 1/2" NPT  
A
Note: Incorporates safety screws  
= 20 mm  
C
01  
Low Energy Contacts  
Note: See page 197  
36  
Ordering:  
GSD  
X
XX  
Example: GSD C 01 B  
204  
Industrial Safety Products •  
GSS Series  
 
Actuator Types  
Additional Lever Types  
For use with all Side Rotary Head Styles.  
All dimensions are in mm / in  
Figure 2 illustrates standard lever types  
which conform to EN 50047.  
15 ± 3 /  
0.39 ± 0.8  
DT  
OP  
75˚  
20 /  
0.79  
30˚  
A1B  
ø19 /  
0.748  
GSD  
40 /  
1.57  
Additional  
levers  
55 /  
2.17  
45 /  
1.77  
available  
40 /  
(see page 208)  
1.58  
6 /  
0.24  
ø19 /  
27 /  
0.74  
1.07  
Side Rotary, metal roller  
75˚  
75˚  
46,5 /  
1.83  
ø 9,9 /  
0.39  
DT  
FP  
21 /  
0.827  
OP  
OT  
(max.)  
B
C
15 /  
0.59  
18 ± 0,5 /  
0.709  
15 /  
0.591  
Side Rotary Roller Lever  
A1B Metal Roller  
Top pin plunger  
10 ± 1,5 /  
0.394  
OP  
Figure 2  
DT  
30˚  
20 /  
0.787  
ø12,4 /  
0.49  
35 /  
1.378  
25 /  
0.984  
Top roller plunger  
XXX  
GSS Series  
Industrial Safety Products •  
205  
 
GSE EN 50047 Compatible  
Safety 3 Conduit Metal  
Standard  
Slow-Action Contacts  
3 NORMALLY CLOSED/  
1 NORMALLY OPEN  
BREAK BEFORE MAKE  
Actuator Types  
11  
21  
31  
12  
22  
32  
2Y  
Technical Data  
Mechanical  
life  
up to 15 million  
operations  
Zb  
43  
44  
15 ±3 /  
0.39 ±0.08  
OP  
-3,6  
11-12  
21-22  
31-32  
43-44  
20  
32  
Degree of  
protection  
IP66  
NEMA/UL  
type 1, 4, 12, 13  
DT  
75˚  
30˚  
A1B  
Temperature Operating:  
55 /  
2.17  
40 /  
1.57  
range  
-25 °C to +85 °C /  
-13 °F to +185 °F  
Storage:  
-40 °C to +85 °C /  
-40 °F to +185 °F  
OT  
*
Additional  
levers  
available  
(R.P.)  
(D.T.)  
(*)  
(F.P.) 0°  
(O.P.1) 26°  
(O.P.2) 32°  
(see page 208)  
38°  
(O.T.) 71° to 85°  
Side Rotary, metal roller  
Approvals*  
IEC 60947-5-1  
EN 60947-5-1  
ac15 A300  
37,5 mm  
21 /  
0.82  
DT  
FP  
dc13 Q300  
BG, UL & CSA  
OP  
OT  
(max.)  
35 mm  
34 mm  
B
15 /  
0.59  
18 ±0,5 /  
0.709 ±0.02  
Vibration  
Shock  
10 g conforming to  
IEC 68-2-6  
33 mm  
*
50 g conforming to  
IEC 68-2-27  
30,5 mm  
Top pin plunger  
OT  
(MAX)  
15 ±3 /  
0.59 ±0.12  
DT  
Terminal marking to EN 50013  
OP  
20 /  
0.79  
11,3  
15  
18,3  
30˚  
11-12  
21-22  
31-32  
43-44  
*See Standards (page 179)  
Dimensions in mm / in  
35 /  
1.38  
25 /  
0.98  
C
42 /  
1.65  
40 /  
16,8  
OT  
*
1.57  
22 /  
0.87  
20 /  
Top roller plunger  
24,75 /  
0.97  
12,5 /  
0.49  
0.79  
3 /  
0.12  
* Point from which the positive opening is assured  
2,15 /  
0.08  
R
** Positive opening occurs at operating position. But to meet IEC/EN 60947-5-3  
which requires a dielectric gap of 2,5 kV, positive opening is assured at*.  
60 /  
2.37  
13,75 /  
0.54  
2,5 /  
0.1  
52 /  
2.05  
4 /  
0.16  
12 /  
0.47  
30 /  
1.18  
57 /  
2.24  
65 /  
2.56  
conduit  
thread  
23,8 /  
0.94  
Conduit  
Thread  
ø 23 /  
ø 0.9  
= 1/2" NPT  
A
Note: Incorporates safety screws  
= 20 mm  
C
Low Energy Contacts  
47  
Ordering:  
Note: See page 201  
GSE  
X
XX  
XXX  
Example: GSE C 20 B  
206  
Industrial Safety Products •  
GSS Series  
 
Additional Lever Types  
For use with all Side Rotary Head Styles.  
All dimensions are in mm / in  
Figure 2 illustrates standard lever types  
which conform to EN 50047.  
GSE  
45 /  
1.77  
40 /  
1.58  
6 /  
0.24  
ø19 /  
27 /  
0.74  
1.07  
75˚  
75˚  
46,5 /  
1.83  
15 /  
0.59  
Side Rotary Roller Lever  
A1B Metal Roller  
Figure 2  
Industrial Safety Products •  
207  
GSS Series  
 
GSS Series  
208  
Industrial Safety Products •  
 

Graco Inc Paint Sprayer 224483 User Manual
Graco Marine Instruments 309868D User Manual
Harbor Freight Tools Automobile Parts 37481 User Manual
Harbor Freight Tools Binoculars 41491 User Manual
Harrington Hoists Chainsaw Sharpener 10 2 AH250 AH500 Main Body User Manual
Hypertec Mouse Mini Silver Optical Mouse User Manual
Hypertec Mouse MOU 1310HY User Manual
IBM Car Video System T120 User Manual
IBM Film Camera 5074 User Manual
Ikelite Digital Camera DSC P200 User Manual