Huawei Network Card E156G User Manual

Copyright © Huawei Technologies Co., Ltd. 2009. All rights  
reserved.  
No part of this document may be reproduced or transmitted in any form or by any means without  
prior written consent of Huawei Technologies Co., Ltd.  
The product described in this manual may include copyrighted software of Huawei Technologies Co.,  
Ltd and possible licensors. Customers shall not in any manner reproduce, distribute, modify,  
decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said  
software, unless such restrictions are prohibited by applicable laws or such actions are approved by  
respective copyright holders under licenses.  
Trademarks and Permissions  
,
, and  
are trademarks or registered trademarks of Huawei Technologies  
Co., Ltd.  
Other trademarks, product, service and company names mentioned are the property of their  
respective owners.  
Notice  
Some features of the product and its accessories described herein rely on the software installed,  
capacities and settings of local network, and may not be activated or may be limited by local  
network operators or network service providers, thus the descriptions herein may not exactly match  
the product or its accessories you purchase.  
Huawei Technologies Co., Ltd reserves the right to change or modify any information or  
specifications contained in this manual without prior notice or obligation.  
 
Thank you for choosing Mobile Broadband E156G USB Stick  
(hereinafter referred to as the E156G). With the E156G, you  
can access the Internet through wireless network at a high  
speed.  
Note:  
This manual describes the appearance, installation and removal of the E156G. For the operation of  
the management program, refer to the User Manual.  
What Is in Your Package  
The package of your E156G contains the following items:  
One E156G  
One Quick Start  
One USB cable  
1
 
 
Getting to Know Your E156G  
The following figure shows the appearance of the E156G. It is only for your reference. The actual  
product may differ.  
1
2
3
4
6
5
n
USB Interface  
It connects the E156G to a computer.  
o
SIM/USIM Card Slot  
It is where you insert the subscriber identity module/UMTS subscriber identity module (SIM/USIM)  
card.  
2
 
 
p
Micro SD Card Slot  
It is where you insert the Micro Secure Digital Memory (SD) card  
q
External Antenna Jack  
It connects the E156G to an external antenna.  
r
s
Strap Hole  
Indicator  
It indicates the status of the E156G.  
Colour  
Green  
Status  
Meaning  
Blinking (on for 100ms and off  
for 100ms; then on for 100ms  
and off for 2700ms)  
The E156G is powered on.  
Green  
Blue  
Blinking (on for 100ms and off  
for 2900ms)  
The E156G is registered to a GSM/GPRS/EDGE  
network.  
Blinking (on for 100ms and off  
for 2900ms)  
The E156G is registered to a UMTS network.  
Green  
On  
The E156G is connected to a GPRS/EDGE  
network.  
Blue  
Cyan  
-
On  
On  
Off  
The E156G is connected to a WCDMA network.  
The E156G is connected to a HSDPA network.  
The E156G is removed.  
3
 
Preparation  
Requirements for the Computer  
To use the E156G, the computer should meet the following requirements:  
USB Type A Receptacle, Compatible with USB 2. 0 High Speed.  
Windows 2000 SP4, Windows XP SP2, Windows Vista.  
Your computer’s hardware system should meet or exceed the recommended system  
requirements for the installed version of OS.  
Resolution for the display: 800 × 600 or above.  
Getting Your E156G Ready  
1. Remove the USIM/SIM card slot from the E156G.  
2. Insert the USIM/SIM card into the card slot.  
3. Insert the card slot into the E156G.  
4
 
 
Inserting the Micro SD Card (Optional)  
Insert the micro SD card into the E156G, as shown in the following figure.  
Note:  
Do not remove the micro SD card when it is being used. Removing the card during an operation  
may damage the micro SD card as well as the device, and data stored on the card may be  
corrupted.  
5
 
Installation/Removal Guide  
On different operating systems (OSs), the installation and removal procedures may differ. Follow the  
system prompts during operation.  
Connecting the E156G with a Computer  
Note:  
First, power on the computer. Then connect the E156G with the computer. Otherwise, the E156G  
cannot be installed as normal.  
1. Plug the E156G into the USB interface of the laptop or desktop computer.  
You can connect the E156G to a laptop or desktop computer using the USB cable for better signals.  
6
 
 
2. The OS automatically detects and recognises new hardware and starts the installation wizard.  
3. Follow the prompts of the installation wizard.  
4. After the program is installed, a shortcut icon for the E156G management program is displayed  
on the desktop.  
Starting the Management Program  
After the E156G is installed, the management program is launched automatically. Then every time  
the E156G is connected to the PC, the management program is launched automatically.  
You can also double-click the shortcut icon on the desktop to launch the management program.  
Removing the E156G  
Remove the E156G directly.  
Removing the Management Program  
1. Click Start Menu.  
2. Click Control Panel.  
3. Click Add/Remove Program to remove the management program of the E156G.  
Note:  
Before removing the management program, exit the management program.  
7
 
Safety Information  
Read the safety information carefully to ensure the correct and safe use of your wireless device.  
Interference  
Do not use your wireless device if using the device is prohibited or when it cause danger or  
interference with electric devices.  
Medical Device  
Do not use your wireless device and follow the rules and regulations set forth by the hospitals  
and health care facilities.  
Some wireless devices may affect the performance of the hearing aids. For any such problems,  
consult your service provider.  
If you are using an electronic medical device, consult the doctor or device manufacturer to  
confirm whether the radio wave affects the operation of this device.  
Area with Inflammables and Explosives  
To prevent explosions and fires in areas that are stored with inflammable and explosive devices, do  
not use your wireless device and observe the rules. Areas stored with inflammables and explosives  
include but are not limited to the following:  
Gas station  
Fuel depot (such as the bunk below the deck of a ship)  
Container/Vehicle for storing or transporting fuels or chemical products  
Area where the air contains chemical substances and particles (such as granule, dust, or metal  
powder)  
Area indicated with the "Explosives" sign  
8
 
 
Area indicated with the "Power off bi-direction wireless equipment" sign  
Area where you are generally suggested to stop the engine of a vehicle  
Traffic Security  
Observe local laws and regulations while using the wireless device. To prevent accidents, do  
not use your wireless device while driving.  
RF signals may affect electronic systems of motor vehicles. For more information, consult the  
vehicle manufacturer.  
In a motor vehicle, do not place the wireless device over the air bag or in the air bag  
deployment area. Otherwise, the wireless device may hurt you owing to the strong force when  
the air bag inflates.  
Observe the rules and regulations of airline companies. When boarding, switch off your  
wireless device. Otherwise, the radio signal of the wireless device may interfere with the plane  
control signals.  
Safety of Children  
Do not allow children to use the wireless device without guidance. Small and sharp components of  
the wireless device may cause danger to children or cause suffocation if children swallow the  
components.  
Environment Protection  
Observe the local regulations regarding the disposal of your packaging materials, used wireless  
device and accessories, and promote their recycling.  
WEEE Approval  
The wireless device is in compliance with the essential requirements and other relevant provisions of  
the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive).  
9
 
RoHS Approval  
The wireless device is in compliance with the restriction of the use of certain hazardous substances  
in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive).  
Laws and Regulations Observance  
Observe laws and regulations when using your wireless device. Respect the privacy and legal rights  
of the others.  
Care and Maintenance  
It is normal that your wireless device gets hot when you use or charge it. Before you clean or  
maintain the wireless device, stop all applications and disconnect the wireless device from your PC.  
Use your wireless device and accessories with care and in clean environment. Keep the wireless  
device from a fire or a lit cigarette.  
Protect your wireless device and accessories from water and vapor and keep them dry.  
Do not drop, throw or bend your wireless device.  
Clean your wireless device with a piece of damp and soft antistatic cloth. Do not use any  
chemical agents (such as alcohol and benzene), chemical detergent, or powder to clean it.  
Do not leave your wireless device and accessories in a place with a considerably low or high  
temperature.  
Use only accessories of the wireless device approved by the manufacture. Contact the  
authorized service center for any abnormity of the wireless device or accessories.  
Do not dismantle the wireless device or accessories. Otherwise, the wireless device and  
accessories are not covered by the warranty.  
Emergency Call  
This wireless device functions through receiving and transmitting radio signals. Therefore, the  
connection cannot be guaranteed in all conditions. In an emergency, you should not rely solely on  
10  
 
the wireless device for essential communications.  
Specific Absorption Rate (SAR)  
Your wireless device is a radio transmitter and receiver. It is designed not to exceed the limits for  
exposure to radio waves recommended by international guidelines. These guidelines were  
developed by the independent scientific organization ICNIRP and include safety margins designed to  
assure the protection of all persons, regardless of age and health.  
The guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR  
limit for wireless devices is 2.0 W/kg and the highest SAR value for this device when tested complied  
with this limit.  
Body Worn Operation  
Important safety information regarding radiofrequency radiation (RF) exposure  
To ensure compliance with RF exposure guidelines the device must be used with a minimum of 1.5  
cm separation from the body.  
Failure to observe these instructions could result in your RF exposure exceeding the relevant  
guideline limits.  
Regulatory Information  
The following approvals and notices apply in specific regions as noted.  
CE Approval (European Union)  
The wireless device is approved to be used in the member states of the EU. The wireless device is in  
compliance with the essential requirements and other relevant provisions of the Radio and  
Telecommunications Terminal Equipment Directive 1999/5/EC (R&TTE Directive).  
* This device should be installed and operated with a minimum distance of 20 cm between the  
radiator and your body when using it via USB cable.  
11  
 
Acronyms and Abbreviations  
EDGE  
GPRS  
GSM  
HSDPA  
OS  
Enhanced Data Rates for GSM Evolution  
General Packet Radio Service  
Global System for Mobile Communications  
High Speed Downlink Packet Access  
Operating System  
PIN  
Personal Identification Number  
Specific Absorption Rate  
SAR  
SIM  
Subscriber Identity Module  
UMTS  
USB  
Universal Mobile Telecommunications System  
Universal Serial Bus  
USIM  
WCDMA  
UMTS Subscriber Identity Module  
Wideband Code Division Multiple Access  
Version: V100R001_01 Part Number: 31010AFG  
12  
 
 

Graco Air Compressor 240E+14 User Manual
Graco Digital Camera 850 6 02 User Manual
Grizzly Dust Collector T25448 User Manual
Harbor Freight Tools Bicycle Accessories 66552 User Manual
Harbor Freight Tools Welder 95028 User Manual
Harbor Freight Tools Welding System 93096 User Manual
Hotpoint Washer Dryer WDUD 10760 User Manual
HP Hewlett Packard Computer Drive 304251 008 North America User Manual
Hubbell Stereo Amplifier 670 801 EX User Manual
Hunter Fan Ventilation Hood 81003 User Manual