Bluetooth Headset User Guide
HCB35
Download from Www.Somanuals.com. All Manuals Search And Download
Index
ꢀ. Notice before using
2. Package List
3. Product Introduction
4. Charging the Headset
5. Power On/ Off
6. Pairing the Headset (or any Bluetooth Device)
7. Wearing the Headset
8. Answering calls
9. Refusing calls
ꢀ0. Ending calls
ꢀꢀ. Voice Dialing
ꢀ2. Redialing
ꢀ3. Mute
ꢀ4. Transferring calls
ꢀ5. Maintaining calls
ꢀ6. Ending Call ꢀ and answering Call 2
ꢀ7. Triple Phone Conversation
ꢀ8. Adjusting the Volume
ꢀ9. Safety Instruction
20. Specifications
2ꢀ. Excluding Problems
22. Storage of the Headset
23. Q & A
24. Declaration of Conformity
25. Company Website
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ
1. Notice before using
Thank you for purchasing our Bluetooth Headset HCB35. First
of all, please check to find everything in your package and care-
fully study the user guide to know the function details. HCB35
is developed by the innovative Bluetooth wireless technology,
enabled to connect the Bluetooth mobile phone designed with
Audio Gateway (HCBꢀ8/ HCB2ꢀ), PDA, desktop and notebook
with the USB Bluetooth Dongle plugged-in, etc. Before using
it, please confirm your mobile phone complies with Bluetooth
Vꢀ.ꢀ/ Vꢀ.2 and supports the Bluetooth Headset or Handsfree
Profile.
2. Package List
Please inspect the product you purchased. Refer to the below
package list to make sure there is no shortage or defect inside.
The complete package includes the following items:
►
►
►
►
HCB35 Bluetooth Headset ...............ꢀ
User Guide........................................ꢀ
Warranty Card ..................................ꢀ
Travel Charger (INPUT: AC100-240V, 50/ 60Hz, OUTPUT:
DC5.ꢀV, ꢀ20mA) .............................ꢀ
If you find any shortage, please contact the retailer shop where
you purchased this product.
3. Product Introduction
Download from Www.Somanuals.com. All Manuals Search And Download
2
Function (Answering/ Ending/ On/ Off) Button 3
LED (Indicator) Light
Receiver (Speaker)
Microphone
Power Interface adapter (charging)
Ear Hook
Decrease Volume key (-) ꢀ
Increase Volume key (+) 2
Note:
● For first time use, make sure to fully recharge the Headset bat-
tery.
Download from Www.Somanuals.com. All Manuals Search And Download
3
4. Charging the Headset
HCB35 comes with a Lithium Polymer battery built-in.
ꢀ. Plug the travel charger into the power socket.
2. Plug the end of the travel charger into the power interface
adapter of the Headset.
3. While charging, the indicator will turn red; when charging is
completed, the red indicator will shut off or flashes red.
Note: Charging time is around 90~ꢀ20 minutes.
● For first time use, make sure to fully recharge the Headset up to
4 hours. After a long time of not using it (around one month),
while recharging, it takes a while for the indicator to turn red.
● While charging, please do not use the Headset.
● Please use the original charger to recharge the Headset.
● When the indicator flashes the red light, it means the battery is
low, please recharge the Headset right away.
● Please recharge the Headset within the temperature range of -10
℃ (+14℉) +45℃ (+113℉).
5. Power On/ Off
ꢀ. Press and hold the function button for 2~3 seconds, the power
will turn on after the indicator flashes the blue light 3 times.
2. To turn the power off, press and hold the function button for
2~3 seconds until you see the red indicator flash 3 times.
Note:
Download from Www.Somanuals.com. All Manuals Search And Download
4
● While turning the Headset on, you will hear the “Du Du” sound
from the receiver. The blue indicator light will flash 5 times,
then 2 times, and after repeating this for 5 times, the indicator
will flash the blue light every 3 seconds to come into a standby
mode.
● While the Headset is turned on, it will automatically search for
the paired device. Under “ON” mode and within the effective
range of 10 meters from the Headset, the indicator will flash the
blue light to indicate that it entered the connecting mode.
● When turning the headset off, you will hear one “Bi” sound fol-
lowed by two “Du” sounds, then the indicator will shut off after
flashing the red light for a few times.
6. Pairing the Headset (or any Bluetooth Device)
You must pair the Headset with your Bluetooth phone or any
Bluetooth device before you use the Headset for the first time.
ꢀ.Ensure the Headset is off.
2.Press and hold the function button for 5 seconds until the blue
indicator light flashes with the red indicator light to enter the
pairing mode.
3.Ensure your mobile phone has the Bluetooth function and
start the Bluetooth new device searching function. Please
follow the instructions of your mobile phone to proceed the
operation.
4.When your mobile phone is in the stage of searching a new
Bluetooth device, it will find HCB35.
Download from Www.Somanuals.com. All Manuals Search And Download
5
5.Please choose and confirm HCB35.
6.Key in the Headset Password “0000” and press YES. If the
pairing is successful, the indicator turns to flash the blue light
only. For some mobile phones, after pairing you may have
to select and confirm HCB35 again to start the connection.
(Please read your mobile phone manual carefully to take the
right steps.)
7.The Headset is in the standby mode, you can start to receive
and make call.
Note:
● If the pairing is not successful, the Headset will return to the
standby mode, please repeat the pairing process to try the pair-
ing again.
● While pairing, it is better to keep the distance between the mo-
bile phone and Headset around ꢀ0 cm to ꢀm and make sure no
metal objects are between.
● While pairing the Headset with other Bluetooth device, when
the device asks for the Password, please key-in “0000”. For
more details, please check the manual of your Bluetooth device
to proceed the operation.
● Even though the following situations happen, the paired devices
remain pairing.
- The power for one of the devices is off.
- The service for one of the devices is off.
- One of the devices is re-switched on.
Download from Www.Somanuals.com. All Manuals Search And Download
6
7. Wearing the Headset
According to your preference, adjust the headset on your left
or right ear.
8. Answering the calls
ꢀ. While there is a call coming, wait until you hear the ringing
from your Headset receiver to press the function button to
answer the call.
2. If the mobile phone is ringing first, wait until the Headset is
ringing, then press the function button.
3. While answering the calls, the blue indicator light flashes 4
times each second.
4. If the mobile phone is ringing and your Headset is off, turn
Download from Www.Somanuals.com. All Manuals Search And Download
7
on your Headset first, then press the function button to answer
the call.
5. If your mobile phone has the function of automatically re-
ceiving calls and you already set it up, while the call is com-
ing, your Headset can receive the call automatically without
pressing the function button.
Note:
● For some mobile phones, the ringing sound of the Headset may
be the same as the ringing sound of the mobile phone, such as
Nokia…
● For some mobile phones, the ringing sound of the Headset is
not the same as the ringing sound of the mobile phone, such as
Motorola…
9. Refusing calls
Wait to hear the ringing from your receiver, then press and hold
the function button for 2~3 seconds until you hear the “Du”
sound to refuse the calls.
10. Ending calls
ꢀ. When the conversation is over, press the function button to
end calls.
2. Wait until the other end hangs up the phone to end calls.
11. Voice dialing
Download from Www.Somanuals.com. All Manuals Search And Download
8
ꢀ. If your mobile phone supports the voice dialing function, you
can use this function with your Headset too.
2. Under the standby or connecting mode, press the function
button of the Headset and follow the mobile phone instruc-
tions to proceed with the voice dialing.
Note:
● The activation of the voice dialing function will depend on the
design of your mobile phone.
● The working range of the Bluetooth Headset is 5 meters indoors
and 5~ꢀ0 meters outdoors.
12. Redialing
ꢀ. If your mobile phone supports the redialing function, you can
use this function with your Headset too.
2. Under the standby or connecting mode, press the decrease
volume key (-) of the Headset for 2~3 seconds until you hear
the “Du” sound to redial the last call.
13. Mute
ꢀ. During a phone conversation, press the decrease (-) and in-
crease (+) volume key at the same time until you hear the
“Du” sound, then the other end will not hear you.
2. Under the mute mode, you will hear the intermittent “Du”
sound.
3. Press either the increase (+) or decrease (-) volume button to
Download from Www.Somanuals.com. All Manuals Search And Download
9
end the mute function.
14. Transferring calls
ꢀ. When you are answering the call with the Headset, press the
increase (+) volume key for 2~3 seconds until you hear one
“Du” sound, then the call will be transferred to your mobile
phone.
2. When you are answering the call with the mobile phone, press
the function button of the mobile phone to transfer the call to
your Headset. For some mobile phones, the phone LCD will
show the transferring sign, some will not.
Note:
● To activate this function, your mobile phone must support the
Handsfree mode. For more details, please check the manual of
your mobile phone.
15. Maintaining calls
ꢀ. When you are answering the call with the Headset, press the
decrease (-) volume key for 2~3 seconds until you hear one
“Du” sound, then the call will be maintained. If there is an
interrupting call coming, the Headset will answer it automati-
cally.
2. Press the decrease (-) volume key for 2~3 seconds until you
hear one “Du” sound to end the maintaining call function.
Also do this to renew the call.
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ0
Note:
● To activate this function, please make sure the assigned tele-
communications agent provides this service.
● To activate this function, please refer to the instructions of your
mobile phones manual to make sure your phone program sup-
ports this function.
16. Ending Call 1 and answering Call 2
While you are answering Call ꢀ from your Headset, and having
the interrupting call, you will hear the notifying “Du Du” sound.
Press and hold the decrease (-) volume button for 4~5 seconds
until you hear one “Du” sound followed by the music, Call 1
will be ended and the interrupting call (Call 2) will be answered
automatically.
Note:
● To activate this function, please make sure the assigned tele-
communications agent provides this service.
● To activate this function, please refer to the instructions of your
mobile phones manual to make sure your phone program sup-
ports this function.
17. Triple phone conversation
ꢀ. While you are answering Call ꢀ from your Headset and hav-
ing the interrupting call, you will hear the notifying “Du Du”
sound. Press the decrease (-) volume key for 2~3 seconds
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀꢀ
until you hear the “Du” sound, Call 1 will be maintained and
the interrupting call (Call 2) will be answered automatically.
2. To proceed the triple phone conversation while you are an-
swering the interrupting call (Call 2), press the increase (+)
volume key for 2~3 seconds until you hear the “Du” sound,
the maintained Call ꢀ will be renewed, then the three ends
can talk together.
3. To end the triple phone conversation, press the function but-
ton, then Call ꢀ and Call 2 will be hanged up together.
Note:
● To activate this function, you must make sure the assigned tele-
communications agent supports this service.
● To activate this function, please refer to the instructions of your
mobile phones manual to make sure your phone program sup-
ports this function.
● When the triple phone conversation is on board, it can not return
to the mode of having only Call ꢀ or Call 2.
● When the triple phone conversation has not been activated, you
can press the decrease (-) volume key for 2~3 seconds to easily
transfer the calls between Call ꢀ and Call 2.
● If Call 1 is maintained and Call 2 is on line, quickly press the
function button to end Call 2 and renew Call ꢀ.
18. Adjusting the Volume
During a call, you may adjust the Headset’s volume.
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ2
ꢀ. To increase the volume, press the increase (+) volume key.
2. To decrease the volume, press the decrease (-) volume key.
Note:
● You will hear the “Du Du” sound while adjusting the volume up
to the loudest or lowest.
19. Safety instruction
ꢀ. Read the Headset manual carefully and use the headset cor-
rectly by following the instructions.
2. Keep the Headset away from children, avoid children from
swallowing it accidentally.
3. Do not use the cleaning liquid or spray to clean the Headset.
4. Do not clean the Headset while charging it.
5. Do not disassemble the Headset. If you encounter a problem,
contact the retailer shop.
● Urgent handling
-If you enconter a problem, turn the Headset off first.
-If the inside components breakdown, please contact the repairing
center to ask for immediate support and service.
20. Specification
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ3
Product Model No.
HCB35
Standard Convention/ Signal Output Bluetooth Vꢀ.2, Class II
Frequency Band
Talk/ Standby Time
Supporting Profile
Connection
2.4GHz ~ 2.4835GHz, ISM Band
Up to 9 hours / Up to 300 hours
Headset & Handsfree
Peer to Peer
Data Encryption
Power Capacity
Power Supply
ꢀ28 bits encrypted
Rechargeable Li-Polymer
5V DC, ꢀ00~240V AC adapter
-ꢀ0 ~ 55 ℃
Operation Temperature
Facility Saving Temperature
Operation Moisture
Weight
-20 ~ 60 ℃
ꢀ0% ~ 90% (non-concrete status)
4ꢀ.4 g (battery included)
ꢀ50xꢀ40x47 mm
Size
Safety Regulation
CE, FCC, BQB
21. Excluding Problems
1. The Headset flashes the red indicator light: The battery is low,
please recharge your Headset.
2. If after recharging for 20 minutes, the Headset does not turn
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ4
on: For initial use, the power will be on after charging the
Headset at least for 40 minutes. It is suggested to fully re-
charge the Headset if you use it for the first time.
3. Does not show the recharging sign: When the battery is com-
pletely exhausted or the Headset has not been used for a long
time, when charging, the red indicator light will be lit after a
few minutes.
4. You hear no sound coming from the Headset:
- Make sure the Headset has been paired with the other Blue-
tooth device.
- Make sure the Headset is on.
- Make sure the distance between the Headset and the paired
Bluetooth device is within ꢀ0 meters.
- Make sure your mobile phone has a good signal.
- Some Bluetooth mobile phones support only one Headset, if
you pair it with more than one Headset, it may cause the other
Headsets being cut off.
22. Storage of the Headset
- Using the non-original accessories, it may debase the product’s
function, cause the product damage, electrical conflict and the
termination of the warranty.
- Do not disassemble the Headset, it may damage the Headset
accidentally or cause the warranty invalidation.
- Put the Headset away from places full of dust.
- Use clean and soft fabric to clean the Headset’s surface.
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ5
- Put the Headset into your pocket while not using it.
- Be aware not to let Children play with the Headset, avoiding
accidents from happening or damaging the product.
- Avoid storing the Headset in high or extra low temperature.
[Travel charger]
- The travel charger is designed for indoor use, please do not
use it outdoors.
- Connect the travel charger with the correct power supply.
- Avoid pulling the cable to take the travel charger off the sock-
et, it may damage the travel charger.
[Battery]
- New battery: for first time use, please fully recharge the
battery for 4 hours.
- Only authorized and qualified personnel can do battery chang-
ing.
- Under the normal usage, the rechargeable battery can be used
for the long time.
- The battery must be recharged within temperatures of -ꢀ0 ℃
to 45℃.
- Using the Headset under room temperature enables the bat-
tery to achieve its maximum capacity.
- Under a chilly environment, it may cause the battery’s capac-
ity to decrease.
- Recharge the Headset at least once every two months, either
you use it or not.
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ6
23. Q & A
Q : Why does the fully-charged Headset under the “On” mode not
work with the Bluetooth mobile phone?
A: You must activate the Bluetooth function of your mobile phone
and finish the pairing between your mobile phone and Head-
set.
Q : Can HCB35 work with any of the mobile phones?
A : No, this Headset works only with Bluetooth mobile phones.
Q : How far is the working distance between the Headset and the
mobile phone?
A : Since HCB35 is certificated by BQB, compliable with Blue-
tooth Vꢀ.2, Class II, the longest working distance is ꢀ0 me-
ters. But, this working distance may be shortened by the
interference existed in the surroundings and due to the insuf-
ficient Bluetooth function of the mobile phone.
Q : Why does my Bluetooth mobile phone find many Bluetooth
devices while searching for the new Bluetooth device?
A : Most of the mobile phones are allowed to find more than
one Bluetooth device within the working range. When the
searching is finished, your mobile phone’s LCD will show
HCB35 or some Unknown Devices. Please select and con-
firm HCB35.
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ7
Q : Why my mobile phone could not find the Headset?
A : Only while your Headset is under the pairing mode, your mo-
bile phone can find the Headset. Please follow the instruc-
tions of your Headset manual to proceed the pairing process.
Q : Shall we pair the Headset every time while using it?
A : No. The paired devices remain paired regardless of turning the
power off, reopening the devices or changing the battery.
Q : Why is the voice from the Headset not clear?
A : It may be the following two reasons:
(ꢀ) Your location has a bad signal, please move to a location with
a better signal.
(2) The working range between the Headset and the mobile phone
has been exceeded. Please make sure the Headset and mobile
phone are within the working range of ꢀ0 meters and there is
no obvious interference between.
Q : What can I do if the voice from the Headset is not clear?
A : Make sure your mobile phone is in a location with a better
signal and increase the volume of the mobile phone or the
Headset.
Q : Why is the Headset suddenly not working?
A : (ꢀ) The Headset might be out of power. When the battery
is low, the Headset flashes the red indicator light, please re-
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ8
charge it soon.
(2) The Bluetooth function of your mobile phone gets crashes. It
happens occasionally, please turn the Bluetooth function of
the mobile phone off, and renew it or turn off your Bluetooth
mobile phone and turn it on again.
Q : Why could the voice dialing function of the Headset not be
switched on?
A : (ꢀ) Please re-record the voice tag.
(2) Some mobile phones do not support the voice dialing function.
Please refer to the manual of your mobile phone.
24. Declaration of Conformity
FCC (FCC ID: RL9-HCB08):
HCB35 is FCC certificated as this device complies with part
ꢀ5 of the FCC rules. It is built with new housing, extended
from HCB08.
European CE 0678:
HCB35 has been manufactured in accordance with the Euro-
pean R& TTE directive. It complies with the European Low
Voltage Directive 73/23/EEC and the European EMC Direc-
tive 89/336/EEC.
BQB Qualification:
HCB35 Bluetooth Headset, a BQB Qualified Bluetooth prod-
Download from Www.Somanuals.com. All Manuals Search And Download
ꢀ9
uct is listed as qualified End Product in accordance to section
6.2.4 of the PRD.
25. Company Website
Please visit our company website to know more product de-
tails.
Download from Www.Somanuals.com. All Manuals Search And Download
20
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
Download from Www.Somanuals.com. All Manuals Search And Download
2ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download
|