EMF 450 Series
Flake ICE Maker
✓
✓
Produces up to 552 lbs. (251 Kgs.)* of ICE per day
Constructed from sturdy, corrosion-resistant
300 series stainless steel
✓
✓
Only 16 inches wide
Available with an air-or water-cooled condenser
EMF 450 on a B55 Bin
®
ICE-O-Matic is the Best ICE Making Solution for:
Hard Water, Food Safety and Tight Spaces
Problem
Solution
Maximum ICE
Tight-Fitting Spaces
Maximum ICE production in a minimum amount of space:
Kitchen space utilization
• No additional side clearance required on a
30 inch wide bin
• Maximum ICE production in a 16 inch wide cabinet
• Works on all industry dispensers and bins
Poor Ice Quality
Dependable ICE
Ice is too wet and soft
ICE-O-Matic Flake ICE Makers remove excess water by
pushing the flaked ICE through an extrusion process.
The result is high quality flaked ICE which is ideal for
medical, supermaket or restaurant applications.
®
Operating Environments
ICE-O-Matic Tough
Built to last?
Constructed with a brass evaporator and rugged stainless
steel transport system enclosed in polyurethane insulation
Filter-Free Air
Dirty Air Filter
No air filter to change
Forget to change the air filter?
*Rated at 70 ° (21°) Air / 50° (10°) Water
|