iHome Clock iA17 User Manual

Model iA17  
App-enhanced  
Color Changing  
Alarm Clock Radio for Your  
iPhone / iPod  
works with  
iHome + Sleep  
alarm clock app  
download QR code  
reader app and scan  
iHome + Radio  
internet radio app  
 
FCC Information  
This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
This equipment complies with the limits for a Class B digital device as specified in Part 15 of FCC Rules. These limits  
provide reasonable protection against radio and TV interference in a residential area.  
However, your equipment might cause TV or radio interference even when it is operating properly. To eliminate interference  
you can try one or more of the following corrective measures:  
• Reorient or relocate the receiving antenna.  
• Increase the distance between the equipment and the radio or TV.  
• Use outlets on different electrical circuits for the equipment and the radio or TV.  
• Consult your dealer or an experienced radio/television technician if the problem still exists.  
Modifying or tampering with your systems internal components can cause a malfunction and might invalidate the systems  
warranty and void your FCC authorization to operate it.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
Battery Information  
For models that use Lithium batteries  
• Lithium batteries can explode or cause burns if disassembled, shorted, recharged, exposed to water, fire, or high temperatures. & not  
handled appropriately  
• Do not place loose batteries in a pocket, purse, or other container containing metal objects, mix with used or other battery types, or  
store with hazardous or combustible materials.  
• Store in cool, dry, ventilated area.  
• Follow applicable laws and regulations for transport and disposal.  
 
Controls and Indicators  
Top panel  
Radio Button  
Press to turn unit ON  
iPhone/iPod Dock  
Dock iPhone/iPod  
Power/App Button  
Press to turn unit ON or OFF,  
reset alarm when sounding,  
or activate iHome app  
Presets Button  
Select and set FM radio presets  
Color Button  
Bedtime Button  
Press for sleep timer  
Press to cycle color settings  
Works with iHome+Sleep  
app for custom settings  
Use this  
Alarm Button  
Set and toggle alarm function  
- Minus Settings Button  
Wakeup Button  
Press to lower selected setting  
Resets sounding alarm for next day  
Works with iHome+Sleep app for  
custom settings  
+ Plus Settings Button  
Press to raise selected setting  
Raise Volume Button  
Raise volume  
Play/Pause iPod/iPhone  
Press to play or pause iPod/iPhone  
Lower Volume Button  
Lower volume  
Snooze/Dimmer Button  
Press to silence alarm for  
selected time  
Back panel  
Press to adjust brightness during  
standard operation  
(not during alarm mode)  
Time Sync Button  
Press to sync clock to time  
on docked iPhone/iPod  
DST Switch  
Move to +1 for Daylight Saving  
Time, to -1 for Standard Time  
Line-in Jack  
Use audio cable (not included)  
to connect aux audio source  
Adapter Jack  
Plug in DC adapter cable and  
connect to outlet to power unit  
1
 
iA17 Quick Start  
3: time sync  
1: power  
2: iPhone/iPod  
RESET  
R E S E T  
TEST  
T E S T  
With iPhone or iPod touch docked,  
press and release the Time Sync  
Button on the back of the unit.  
“SYNC” will appear in the display and  
the time will update. If “FAIL”  
appears, try again with different  
iPhone/iPod or set time manually (see  
page 4).  
Attach AC adaptor cable to  
adaptor jack on back of the iA17  
and plug the other end into a  
wall socket to play and charge  
iPhone/iPod.  
Insert a playing iPhone/iPod into the dock  
(must not be in a “skin” or case). After a  
moment you will hear your audio playing  
through the unit. The iPhone/iPod will  
charge while docked.  
4: radio  
5: color change  
Press and release the Radio Button  
to turn on unit in radio mode. Press  
the + or - Button to tune to the  
desired station (press and hold to  
scan to next clear FM station.  
Press and release the Color Button  
as needed to cycle through color  
mode settings Press and release the  
Color Button when a specific color  
is showing to select that color.  
2
 
Display  
PM indicator  
Alarm indicator  
Active App indicator  
Alarm is armed and will sound at set time  
Appears when an iHome app is active  
Bedtime Sleep Timer indicator  
Low Backup Battery indicator  
Radio mode indicator  
Volume indicator  
Time Display  
Installing/Replacing the Clock Backup Battery  
Note: The CR2032 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit.  
This model is equipped with a battery backup circuit that will maintain the time and alarm time settings, as well as the radio  
station preset memory settings in the event of a temporary power interruption. The battery backup circuit will also operate  
the buzzer alarm to wake you up at the selected wake up time even if the power is out. The battery backup circuit requires  
one CR2032 lithium battery, included.  
When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see  
this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2032 battery,  
available wherever batteries are sold, and follow steps 1 through 4 below to install the replacement battery.  
To replace the backup battery:  
Installing Backup Battery  
IMPORTANT: When replacing the backup battery be sure to have the unit connected  
to the AC outlet to maintain all of your settings, otherwise it will be necessary to reset  
the time, alarm time, and radio presets after the battery is replaced.  
1. Locate the battery backup compartment found on the bottom of the unit.  
2. Use a Phillips screwdriver to open the battery compartment cover. Remove the  
cover and remove the exhausted CR2032 battery.  
3. Insert a fresh CR2032 battery in the backup battery compartment with the “+” side  
facing up, as illustrated.  
4. Replace the battery compartment cover and screw the compartment door back in  
place. Do not overtighten. Confirm that the backup battery indicator is not flashing  
in the display.  
Note: Make sure you dispose of battery properly (see your local regulations).  
3
 
Setting the Time Using Time Sync  
The Time Sync feature allows you to sync the time setting on the unit to the time from your iPhone or recent model iPod (iPod touch,  
iPod nano and iPod Classic; older iPod models such as iPod mini do not support this feature).  
1. Gently dock your iPhone or iPod.  
2. Press and release the Time Sync Button on the back of the unit. The display turns orange and “SYNC” flashes in the display,  
indicating sync attempt. If sync is successful, the time will update and you will hear two beeps and the cabinet and display will  
turn green briefly.  
3. If sync does not work, a long beep will sound and “FAIL” will appear in red on the display. If this happens, try using a different  
iPhone/iPod to attempt syncing again or set time manually (see below).  
NOTE: The iPhone is constantly updated to current time via cell phone towers. The time on your iPod is only accurate to the  
last time it was synced to a computer. Its possible to have up to 59 seconds difference between the unit and synced  
iPhone/iPod.  
Setting the Time Manually  
1. Set the DST Switch located on the back of the unit to +1 to add one hour for Daylight Saving Time or to -1 to subtract an  
hour for Standard Time.  
2. Press and hold the Time Sync Button until the hour display flashes and turns orange. Press the + or Button to set the  
correct hour (press and hold for rapid setting). Remember to set the correct AM or PM time. The PM Indicator is located to  
the upper left side of the time digits; there is no AM indicator.  
3. Press the  
Button at any time during clock setting to toggle the display between 24 hour (military) and 12 hour (standard)  
display mode. The PM indicator will not appear when display is in 24 hour mode.  
4. Press the Time Sync Button again (or no button press within 10 seconds) to exit the clock setting mode. The display and  
cabinet will flash green and 2 beeps will confirm clock setting is complete.  
Setting the Alarm  
1. Press and hold the  
Button until the display turns orange and the alarm icon and alarm hour flashes on the display.  
2. To set the desired alarm time, press the + or Button (hold for rapid setting). Remember to set the correct AM or PM alarm  
time. The PM Indicator is located to the upper left side of the time digits; there is no AM indicator.  
3. Press and release the  
iPod (includes docked iPhone or iPod), FM radio or buzzer (you cannot wake to aux audio device).  
4. Press and release the Button to confirm wake to source. Unless radio was selected, you will go on to volume setting.  
Button. The current alarm source will flash. Press the + or Button to cycle through alarm sources:  
If radio is selected as the wake to source, the last wake-to FM station is displayed. Press and release the Presets Button  
to cycle through preset stations, or press the + or Button to select a different station (hold briefly for rapid seek). Press and  
release the  
Button to confirm radio station setting and go on to volume setting.  
5. The current alarm volume will appear on the display. Press the + or Button to set the alarm volume from 05 -40.  
6. Press the  
Button to confirm alarm volume. “colr” will appear briefly on the display followed by the current wake to color setting.  
Press the + or Button or Color Button to cycle through the wake to color settings: SUN (sunrise light pattern), FLSH (flashing  
light pattern), GLO (glowing light pattern) or none (no cabinet light).  
7. Press the  
Button (or no button within 10 seconds) to exit alarm setting mode. The display and cabinet will flash green and two  
beeps will confirm you have completed Alarm setting mode. The alarm will be armed, indicated by the green alarm icon on the  
display.  
Note: If iPhone/iPod or FM radio are wake-to source and unit detects no sound for around 30 seconds (or if no iPhone/iPod is  
detected or if AC power is unplugged), the buzzer will sound instead and iPhone/iPod will power down.  
Tip: You can access further alarm settings in the free iHome+Sleep app.  
4
 
Operating the Alarm  
At the set time, the alarm will sound for 1 hour. If waking to iPhone or iPod, make sure your playlist has an hour of music in it.  
1. To turn off the sounding alarm and reset it to come on at the same time the following day, press and release the  
Button  
or Wakeup Button. The alarm sound will stop but the alarm icon will remain in the display, indicating the alarm is armed. To  
turn off the alarm without resetting it for the next day, press and release the  
Button.  
2. Press and release the  
Button during normal operation (alarm is not sounding) to view the currently set alarm time.  
Press and release again as needed to arm the alarm (alarm icon is present) or to cancel it (no alarm icon).  
3. Press and release the Snooze Button while alarm is sounding to temporarily silence the alarm for the set snooze time  
(default is 9 minutes). To adjust the snooze time: Press and hold the Snooze Button during normal operation. The  
snooze time will flash on the display. Press the + or Button to adjust the snooze time from 1 - 29 minutes. Press and  
release the Snooze Button again (or no button within 10 seconds). The display and cabinet will flash green and two beeps will  
sound to confirm snooze setting and return unit to normal operation.  
Playing and Charging your iPhone/iPod  
1. Gently dock playing iPhone or iPod. The unit will turn on and in a moment you will hear your music. When docked, the  
iPhone or iPod will charge until fully charged.  
Note: If the volume is too low on the iPhone/iPod, the unit may not detect that the iPhone/iPod is in play mode. Press  
and release the  
Button to play it.  
2. Press the + or Button to go to the next or previous track; press and hold to scan forwards or backwards within a  
currently playing track.  
3. When the iPhone/iPod is docked and in standby mode, press the  
Button to play it.  
4. When the iPhone or iPod is in play mode, press the Button to pause play; press again to resume play.  
6. Press the or  
Button to adjust the unit volume.  
8. To turn off the unit, press and release the  
Button. Your iPhone/iPod will continue charging while in the dock.  
FM Radio Mode  
Setting up the Antenna  
Extend the FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.  
Tuning and Playing the FM Radio  
1. Press and release the Radio Button to turn the unit on to the currently tuned station, or press and release the Presets  
Button to turn the unit on to the currently selected preset FM station. In either case, the blue FM icon will appear in the  
display.  
2. Press the + or Button to tune radio to a desired station. Pressing and holding the + or Button (2 sec. then  
release) will seek the next clear FM radio station.  
3. Press the  
or  
Button to adjust the volume setting.  
4. To turn off the unit, press the  
Button. iPhone/iPod will continue charging while in the dock.  
5
 
FM Radio Mode  
Setting and using FM Presets  
You can set and save up to 6 FM radio station presets in memory. Once set, you can listen to any preset just by pressing the  
Presets Button until the desired preset is displayed.  
1. Press and release the Presets Button as needed to step through the presets (P1 - P6) to the one you wish to set.  
2. Press and hold the Presets Button until the currently set frequency for the selected preset flashes.  
3. Press the + or Button to tune radio to a desired station.  
4. Press the Presets Button to confirm the station as the selected preset.  
5. Repeat steps 1- 4 above to continue setting presets.  
Setting FM Radio Frequency/Range to Use Unit in Other Countries  
Different regions of the world use different FM radio frequency steps and ranges. You will need to select the one that matches  
the standards in your region (USA, EUROPE, JAPAN, AUSTRALIA,or CHINA). The default setting is USA; if you live in the US,  
you may skip this section.  
1. Make sure the unit is OFF (not playing in any mode). Press and hold the Radio Button for about 5 seconds until “USA”  
flashes in the display. Press the + or Button to select your region (EU=Europe, JPN= Japan, AUS=Australia, CHN=  
China).  
2. Press the Radio Button again (or no button within 10 seconds) to exit the radio frequency setting mode. Two beeps will  
confirm the setting is complete.  
Using the Aux Line-in Jack  
1. Plug one end of an audio patch cord (available at www.ihomeaudio.com) into the headphone or line-out jack on your  
audio device and the other end of the patch cord into the Aux Line-in Jack located on the back of the unit.  
2. Press the  
3. Press the  
Button on the iA17 to play your audio device. Place your device in play mode.  
or Button to adjust the volume on the unit. You may need to adjust to the volume on your device, too.  
Button. Remember to turn off your audio device, too.  
4. To switch off the unit press the  
NOTE: DO NOT play a line-in device while iPhone/iPod is docked and playing or you will hear both audio sources at once.  
6
 
Color Change Mode  
There are 5 color settings, which affect both the cabinet and the display. Press the Color Button to cycle through them.  
The settings are:  
• SLO  
• colr  
Slow color change (default): Colors slowly blend continually from one color into the next  
As the color spectrum cycles, select a fixed color by pressing the Color Button when the desired  
color is showing  
• PULS  
• FAST  
• none  
Colors change in time to the beat, creating a pulse effect  
Fast color change: colors blend quickly from one to another through the color spectrum  
Turns off cabinet color effect and sets display to default color.  
Dimmer Mode  
When unit is in normal mode (no alarm is sounding), press the Snooze/Dimmer Button to cycle through High, Medium, Low,  
and Off brightness settings. Settings affect both the display and cabinet LED.  
Bedtime Sleep Mode  
This unit has a Bedtime Sleep feature which gradually lowers the volume of playing audio over a set time then turns  
the unit off. It will also turn off a docked iPhone or iPod, but will NOT turn off an audio device connected via the Aux  
Line-in jack, so avoid line-in as a sleep source..  
1. Press and release the Bedtime Button as needed to cycle to the desired sleep setting: 90, 60, 30, 15 minutes  
or Off (cancels sleep mode).  
2. To set sleep volume, press the  
or  
Buttons. Sleep volume does not effect normal or alarm volume settings.  
3. During sleep mode, press the Bedtime Button to view the sleep time remaining. Press again to set sleep to the  
next lowest setting.  
4. To cancel sleep mode and turn the unit off, press and release the  
Button.  
Tip: Use the iHome+Sleep app to enjoy expanded and custom bedtime settings  
7
 
A Consumer Guide to Product Safety  
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However,  
improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully  
before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in  
these instructions and on the unit.  
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,  
laundry tub, swimming pool or in a wet basement.  
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For  
example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it  
should not be placed in a built-in installation, such as a bookcase or cabinet, which may impede the flow of air through  
the ventilation openings.  
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances  
(including amplifiers) that produce heat.  
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions  
or as marked on the appliance.  
5. Power-Cable Protection – Power supply cables should be routed so that they are not likely to be walked on or pinched  
by items placed upon or against them. It is always best to have a clear area from where the cable exits the unit to where  
it is plugged into an AC socket.  
6. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning  
instructions.  
7. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings  
or vents located on the product.  
8. Attachments – Do not use attachments not recommended by the product manufacturer.  
9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable  
system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage  
to the product due to lightning and power-line surges.  
10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can result in  
a risk of fire or electric shock.  
11. Damage Requiring Service – The unit should be serviced by qualified service personnel when:  
A. the power supply cable or plug has been damaged.  
B. objects have fallen into or liquid has been spilled into the enclosure.  
C. the unit has been exposed to rain.  
D. the unit has been dropped or the enclosure damaged.  
E. the unit exhibits a marked change in performance or does not operate normally.  
12. Antenna – Do not connect an external antenna to the unit (other than that provided).  
13. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power  
cable should be unplugged from the unit to prevent damage or corrosion.  
14. Servicing – The user should not attempt to service the unit beyond those methods described in the users operating  
instructions. Service methods not covered in the operating instructions should be referred to qualified service personnel.  
8
 
Trouble Shooting  
Symptom  
Possible Problem  
Solution  
Unit doesn’t respond AC adaptor isn’t plugged to a wall outlet or  
Plug the AC adaptor into a wall outlet and plug the connector into  
the power supply jack on the unit  
(no power)  
the connector is not plugged into the power  
supply jack on the back of the unit  
Wall outlet is not functioning  
Plug another device into the same outlet to confirm the outlet is working  
iPhone/iPod cannot  
dock properly  
Remove your iPhone/iPod from the connector and check for  
any obstruction on the connectors in the dock. Try removing  
case or skin from your iPhone/iPod. Then reseat it in the dock.  
Possible obstruction in dock area or on  
iPhone/iPod (skin or case is in the way)  
Playing iPhone/iPod  
but there is no  
sound  
Remove your iPhone/iPod from the connector and check for  
any obstruction on the connectors in the dock and on your  
iPhone/iPod. Then reseat it in the dock.  
iPhone/iPod is not docked properly  
Press play button on your iPhone/Pod to play it manually.  
Your iPhone/iPod is not playing  
iPhone/iPod is locked up  
Please make sure your iPhone/iPod is working properly before  
docking it to the unit. Please refer to your manual for details.  
Using 1st or 2nd generation iPod, iPod Shuffle or  
other device  
Please connect them with Line-in.  
iPhone/iPod didn’t  
charge up  
Remove your iPhone/iPod from the connector and check for  
any obstruction on the connectors in the dock and on your  
iPhone/iPod. Then reseat it in the dock.  
iPhone/iPod is not docked properly  
iPhone/iPod is locked up/frozen  
iPhone/iPod battery has problem  
Volume level is set too high  
Sound source is distorted  
Please make sure your iPhone/iPod is working properly before  
docking it to the unit. Please refer to your manual for details.  
Sound is distorted  
Decrease the unit volume  
If original sound source file is poor quality, distortion and noise  
are easily noticed with high-power speakers.  
Try a file from a trusted audio source such as iTunes  
If you are using an iPod Shuffle or external sound source like  
older generation iPod, try reducing the output volume on the  
device itself. Also, try turning bass boost OFF under iPod  
settings.  
9
 
Limited 1 Year Warranty Information  
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product to be free from defects  
in workmanship and materials, under normal use and conditions, for a period of 1 year from the date of original purchase.  
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this  
fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period, SDI Technologies will  
repair or, at its discretion, replace this product without charge (except for a $20.00 charge for handling, packing, return UPS/postage, and  
insurance). This decision is subject to verification of the defect or malfunction upon delivery of this product to the Factory Service Center listed  
below. The product must include proof of purchase, including date of purchase. The fee for service without proof of purchase is $40.00.  
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or defective batteries are  
the most common cause of problems encountered.  
If service is still required:  
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.  
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the warranty period.  
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $20.00 ($40.00 without proof of purchase).  
4. Send the unit prepaid and insured, to the Factory Service Center listed below.  
Consumer Repair Department  
SDI Technologies Inc.  
1330 Goodyear Drive  
El Paso, TX 79936-6420  
Disclaimer of Warranty  
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products which have  
been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired by unauthorized persons; (ii)  
cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media players, CD’s or tape cassettes (if applicable); (iv)  
the cost of shipping this product to the Factory Service Center and its return to the owner.  
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the original purchaser.  
In no event will SDI Technologies or any of its affiliates, contractors, resellers, their officers, directors, shareholders, members or agents be liable  
to you or any third party for any consequential or incidental damages, any lost profits, actual, exemplary or punitive damages. (Some states do  
not allow limitations on implied warranties or exclusion of consequential damages, so these restrictions may not apply to you.) This warranty  
gives you specific legal rights, and you may also have other rights which vary from state to state.  
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is contractually binding  
to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your SDI Technologies product.  
© 2011 SDI Technologies, Inc. All rights reserved  
or call 1-800-288-2792 Toll Free  
10  
 
iA17-032511-English  
Printed in China  
 

Graco Blood Pressure Monitor 288776 User Manual
Grizzly Saw G0537 User Manual
Hasbro Robotics Ampd User Manual
Havis Shields Fan GSM30027 User Manual
Honeywell Air Cleaner 50100 User Manual
Hotpoint Clothes Dryer TVM560 User Manual
Hunter Fan Ventilation Hood 20090201 User Manual
Icom Portable Radio IC M32 User Manual
iHome Clock Radio 97 User Manual
Iluv Printer ISP200 User Manual