MODEL H8241
120V ON/OFF
PADDLE SWITCH
INSTRUCTIONS
Motor
KEDU
Hot
Out
Neutral
Out
KJD17B
/120V
14
13
24
23
Rear View
of Switch
Hot
In
Neutral
In
Power Source
Figure 1. h8241 on/oFF paddle switch.
Figure 2. h8241 wiring diagram.
Introduction
the Model h8241 features a recessed on (–)
button that can be disabled with a padlock and a
large oFF paddle that ensures fast shut off. the
switch assembly will mount on a standard electri-
cal box, or over a 1" x 2" opening.
Switch Disabling Padlock
The switch can be disabled and locked by insert-
ing a padlock through the ON/START button, as
shown. Locking the switch in this manner can
prevent unauthorized operation of the machine,
which is especially important if the machine is not
stored inside an access-restricted building.
Specifications
rated hp....................................................1⁄2 hp
rated Voltage.............................................. 120V
rated Current................................................16A
padlock shaft size .........................................3⁄16"
IMPORTANT: Locking the switch with a padlock
only restricts its function. It is not a substitute
for disconnecting power from the machine when
adjusting or servicing.
Installation
When installing the h8241 switch, use the wiring
diagram in Figure 2 to ensure proper wire con-
nections.
Padlock
Shaft
ON/START
Button
Note: Only use insulated quick-disconnect crimp-
type female wire terminals with a 1⁄4" tab.
OFF/STOP
Paddle
Figure 3. switch disabled by a padlock.
If you need help with your new paddle switch, call our Tech Support at: (570) 546-9663.
Copyright © FEBrUAry, 2011 By grizzly indUstriAl, inC.
WARNINg: NO PORTION OF THIS INSTRUCTION SHEET MAy bE REPRODUCED IN ANy SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF gRIzzLy INDUSTRIAL, INC.
#ts13813 printEd in ChinA
|