Haier Water Heater FCD 8 User Manual

Mini Sea-ox  
User' Manual  
Haier Household Electric Water Heater  
FCD-8  
Group  
Qingdao Economic & Technical Development Zone  
Haier Water Heater Co.,Ltd.  
Please read this manual before usage  
Retain it for future reference  
 
Usage  
Before Usage  
Dear users,  
After installation, as there's no water inside the tank, please be sure to open  
the water inlet valve and any of water exit. When the tank is filled with water  
and the water exit keeps discharging water, close the valve. Check if there's  
water leakage at each joint. Plug the power plug. In usage, be sure to open  
the cold water valve before the hot water valve to avoid scalding .You can  
turn the handle of the mixing valve upward to the left then pull the handle of  
the safety valve to discharge the water.  
Thanks for choosing Haier water heater product.  
Haier products have good quality and excellent performance. To facilitate  
you to use the product, please read the manual and operate accordingly.  
Please retain it for future reference.  
The international star service of Haier Group will always accompany you.  
No matter what kind of problems you meet in usage, please contact with the  
local after -sales service agent. We are at your service all the time. Thanks  
again for choosing Haier Product.  
Switch on the power. The heating indicator is on. The water heater starts  
operating. When the water temperature reaches 60 , the heating indicator is  
off. The water heater will stop heating and enters heat preservation mode.  
If the water temperature drops to certain degree, the red indicator will light on  
again to continue heating. It will circulate like that to guarantee the continuous  
hot water supply.  
The water heater you purchased may not fully comply with the figure in  
the manual due to the improvement of product. We apologize for the  
inconvenience occurred therefrom.  
Features  
1.Safely:  
Hai-quality heat proof stainless steel electric heating element, safe and  
Reliable; overtemperature protection; overpressure protection of tank;  
2. Durability:  
Attention  
Full plastic shell, elegant and durable;  
Enamel tank, with more reliable quality and longer operation life.  
3. Multi- usage:  
This product requires power supply with 220V , 50Hz.  
The max heating temperature is 60 , not drinkable.  
Enclosed structure, capable of supplying multiple places;  
Suitable for family , enterprise, catering, beauty service etc. on hot water  
Supply.  
Reliable earthing is requested. Earthing wire shall be separated from neutral  
wire strictly. To avoid accident, the positions of the live wire and earthing  
wire can not be replaced.(See to Figure 5.)  
4. Nice molding, space-saving  
Arc appearance, appealing design, dapper and elegant.  
5. Convenience:  
60 thermostatic heating. It will stop heating when the temperature  
Live wire  
Earthing wire  
Earthing wire  
Earthing wire  
Reaches 60  
.
(Figure 5)  
Parameters  
Live wire  
Live wire  
Live wire  
Earthing wire  
Neutral wire  
Neutral wire  
Rated voltage:220V~50Hz  
Power: 1200W  
Dimension(See to Figure 1)  
Weight: (See to Figure 1)  
Rated pressure: 0.75MPa  
Waterproof grade: antisplash(  
Volume: (See to Figure 1)  
)
Tap water pressure: no less than 0.05MPa  
5
2
 
Installation  
Dimension Figure  
Figure 1  
Be sure to have it installed by the appointed staff. It adopts wall-mounting installation.  
First decide the installation location according to the usage requirement. Make two  
holes in the wall with depth 70mm and 9mm by churn drill as per the indication of  
installation diagram.  
Front view  
a1  
Cutaway view  
Side view  
Fasten the wall-mounting plate on the wall tightly with two expansion bolts as per  
indicated in Figure 2. Check and confirm that the bolts are not loose.  
Hang the water heater vertically onto the wall by the wall-mounting plate. Confirm it  
is firmly mounted. Please reserve certain space for the future maintenance during  
installation.  
F
(Figure 3)  
b1  
(Figure 2)  
E
D
d1  
Wall-mounting  
plate  
Expansion bolt  
B
B
c1  
Connect to drain hose  
A Hot water outlet  
B Cold water inlet  
C Mg anode rod  
D Heating element  
E Enamel tank  
Net  
weight  
When the power is switched on, and the water heater starts operating, there may  
be some water discharged from the pressure relief hole of safety valve. It is due to  
the water expansion under heating, and is normal phenomenon. The pressure  
relief hole shall communicate with the air directly. Do not block it. If the water  
heater will be installed in the bathroom without sewer, we suggest you add drain  
hose. Fasten the drain hose to the drain thread of safety valve by twisting (see to  
Figure 3). According to the need, you could truncate or elongate the hose in your  
favor. Connect the other end of drain hose to the sewer to avoid polluting the  
room by splashing. The drain hose connecting to the safety valve shall be kept  
downward sloping in installation and in a frost-free environment.  
Model  
FCD-8  
Volume  
8L  
d1  
a1  
b1  
c1  
8kg  
414mm 100mm  
255mm  
325mm  
F Wall-mounting bracket  
Remarks:the petmitted error limit of above parameters is 10%.  
Schematic Diagram  
Be sure to check and confirm that the tank is filled with water, there's no leakage  
at each joint and the power supply complies with the stipulation before switching  
on the power.  
L:Brown wire  
N:Blue wire  
MT  
BT  
MT:High temperature limiter  
(Figure 4) for reference in installation only  
EH:Heating element  
EH  
L
E:Yellow/green wire  
HL  
E
N
Hot water outlet  
BT: Thermostat  
Safety valve  
HL:Heating indicator  
E
Cold water inlet  
3
4
 

Graco Car Seat 8487 User Manual
Graco GPS Receiver GPSMAP 78 User Manual
Haier Washer Dryer HWM6815 User Manual
Harbor Freight Tools Scale 95364 User Manual
Hoshizaki Water Dispenser DCM 751BAH User Manual
Hotpoint Oven MWHZ33 User Manual
HP Hewlett Packard Projector vp6200 User Manual
HSM Paper Shredder HSM FA 5002 User Manual
Hunter Fan Air Cleaner 30836 User Manual
Husqvarna Trimmer 235FR User Manual