Honeywell Air Cleaner F111 Series 1 User Manual

F111 (Series 1,2)  
In Ceiling Media Air Cleaner  
PRODUCT DATA  
FEATURES  
High Efficiency Particulate Air (HEPA) filter models are  
99.97% efficient and the hospital grade particle filter  
models are 95% efficient at 0.3 micron particles. Both  
models are more efficient on particles smaller and  
larger. There is also a 95% ASHRAE model.  
Circulates up to 1230 cfm.  
Designed to overcome the increase in air flow  
resistance normally caused by filter loading.  
White or black color cover to complement the ceiling.  
CPZ™ module removes up to 95% of the space odors  
for up to 24 months.  
APPLICATION  
• READ AND SAVE THESE  
INSTRUCTIONS  
The F111 (Series 1,2) Ceiling Media Air Cleaner is a media air  
cleaner that uses a single-speed direct drive forward curve  
blower motor with particle filter. When equipped with CPZ™  
modules (2), gases and odors are absorbed from the air  
passing through the unit. The air cleaner removes airborne  
particles such as dust, soot, mold spores, pollen and some  
cooking smoke from the air circulated through the filter.  
Contents  
Application.........................................................................1  
Features ............................................................................1  
Specifications ....................................................................2  
Ordering Information .........................................................2  
Planning the Installation ....................................................3  
Installation .........................................................................4  
Operation...........................................................................6  
Service ..............................................................................6  
Parts List ...........................................................................8  
Limited Two-Year Warranty ...............................................10  
The Honeywell Trademark is used under license from Honeywell Intellectual  
Properties, inc. by Air-Pure Systems.  
Honeywell International Inc. makes no representations or warranties with  
respect to this product  
68-0198EF-4  
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
Approvals:  
Underwriters Laboratories Inc.: Listed.  
Canadian Standards Association: Listed.  
2. When Cutting Or Drilling Into The Wall Or Ceiling, Do  
Not Damage Electrical Wiring And Other Hidden Utili-  
ties.  
3. Never Place A Switch Where It Can Be Reached From  
Accessory: 32000234 Variable Speed Switch.  
Replacement Parts See Parts List, Table 4.  
A Tub Or Shower.  
4. Use This Unit Only In The Manner Intended By The  
Manufacturer. If You have Questions, Contact The Man-  
ufacturer.  
5. Before Servicing Or Cleaning Unit, Switch Power Off At  
Service Panel And Lock Service Panel To Prevent  
Power From Being Switched on Accidentally.  
6. If This Unit Is To Be Installed Over A Tub Or Shower, It  
Must Be Marked As appropriate For The Application.  
PLANNING THE INSTALLATION  
The number of F111 (series 1,2) air cleaners that are needed is  
determined by taking into account the number of occupants  
and the volume of the space. Type of contamination, outdoor  
air quality and use of the area are also factors. Refer to Table  
3 for general guidelines when determining how many air  
cleaners are needed.  
Choose Location  
Choosing the correct location for the air cleaner affects the  
overall performance of the unit. The bidirectional airflow  
pattern must flow into the longest reaches of the zone being  
cleaned. See Fig. 2.  
EXAMPLE: One air cleaner can provide 2.5 air changes per  
hour in a 24,000 cubic feet (720 cubic meters) no  
smoking area. Table 3 suggests two air cleaners  
for a 24,000 cubic feet area because most areas  
have contaminants that require more units to  
provide quality air.  
CEILING  
CLEANING FOOTPRINT  
F111  
(SERIES  
11000)  
1
If any questions should arise concerning determining the  
number of air cleaners needed for an area, consult your  
distributor or local Honeywell Commercial Air Cleaner  
Distributor.  
FLOOR  
2
CORRECT  
INCORRECT  
Table 3. Determining the Minimum Number of  
Air Cleaners Needed for a Space.  
Space Volume  
(L x W x H) in Cubic  
Feet (Cubic Meter)  
Minimum  
Number of Air  
Cleaners  
Number of  
Persons Present  
M12652A  
12000 to 18000  
(360 to 540)  
30 to 60  
1
2
3
4
5
6
Fig. 2. Correct positioning of the air cleaner  
for optimum cleaning.  
18001 to 35000  
(540 to 1050)  
61 to 90  
35001 to 51000  
(1050 to 1530)  
91 to 120  
121 to 180  
181 to 240  
241 to 300  
NOTE: The F111 Has Not Been Investigated  
For Use In Fire Resistance Rated  
Construction.  
51001 to 65000  
(1530 to 1950)  
65001 to 80000  
(1950 to 2400)  
The air cleaner is designed to be suspended centrally in a  
space and mounted into or on a ceiling. The cleaning footprint  
of the air cleaner is rectangular with air patterns that move  
clean air to the corners of the area while drawing contaminated  
air up from the center of the area. See Fig. 2.  
80001 to 95000  
(2400 to 2850)  
When multiple air cleaners are installed, the allotted areas to  
be cleaned should be equal. The air throw in one direction is  
approximately 55 ft (17m). Air velocity at 90 ft per minute  
(27m per minute) is considered end of throw.  
WARNING  
TO REDUCE THE RISK OF FIRE,ELECTRICAL  
SHOCK, OR INJURY TO PERSONS,OBSERVE THE  
FOLLOWING:  
IMPORTANT  
1. Installation Work And Electrical Wiring Must Be Done  
By Qualified Person(s) In Accordance With All Applica-  
ble Codes And Standard, Including Fire Rated Con-  
structions.  
Never hang the air cleaner higher than 16 ft (5m)  
above the floor.  
3
68-0198EF-4 Rev. 11-07  
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
INSTALLATION  
1. Locate the prepunched hole in the side of the cabinet.  
2. Remove the air cleaner lid.  
3. Remove the connection box cover plate in the center  
cavity of the air cleaner.  
4. Refer to Fig. 3 and 4 for typical wiring diagrams.  
WARNING  
Explosion Hazard Possible.  
Can cause personal injury or equipment damage.  
Do not install or use the F111 (series 1,2) air cleaner  
where there is any danger of gas, vapor or dust  
explosion.  
WARNING  
Can cause personal injury or equipment damage.  
Use only Honeywell 32000234 Variable Speed Switch  
(accessory) to regulate air cleaner speed. Using a  
different speed controller may void the warranty.  
Risk of Fire or Electric Shock.  
IMPORTANT  
This air cleaner has not been investigated for use in  
the ceilings of fire-resistant assemblies.  
IMPORTANT  
Be sure the air cleaner is grounded for correct  
operation and safety.  
CAUTION  
Can cause personal injury or equipment damage.  
Turn off power before installing or servicing the air  
cleaner.  
Canadian installation: NEVER install in ceilings with  
thermal insulation value greater than R-40.  
Electrical Hazard.  
FACTORY WIRING  
BLACK  
IMPORTANT  
BROWN  
EXTERNAL  
WIRING BY  
INSTALLER  
Stand on a stable platform when working with the air  
cleaner.  
MOTOR  
WHITE  
GREEN  
When Installing this Product…  
M12657  
1. Read these instructions carefully. Failure to follow them  
could damage the product or cause a hazardous condi-  
tion.  
Fig. 3. Typical F111 (series 1,2) 120V, 60 Hz or  
208/230, 50/60 Hz wiring diagram.  
2. Check the ratings given in the instructions and on the  
product to make sure the product is suitable for your  
application.  
3. Installer must be a trained, experienced service techni-  
cian.  
4. After installation is complete, check out product opera-  
tion as provided in these instructions.  
FACTORY WIRING  
BLACK  
BROWN  
EXTERNAL  
MOTOR  
277 V  
WIRING BY  
BROWN  
INSTALLER  
STRIPE  
PURPLE  
GREEN  
Unpack the Air Cleaner  
Check that all components are included. The unit consists of:  
M11748  
cabinet and grille/door assembly  
media modules  
literature.  
latches (2)  
Fig. 4. Typical F111 (series 1,2) 277V,  
60 Hz wiring diagram.  
Mount Air Cleaner Cabinet  
Make Opening (if Mounting in a Drop Ceiling)  
The air cleaner can be mounted in a drop ceiling system or  
hung in an open area. Both mounting methods require the air  
cleaner to be level and positioned facing downward for correct  
operation.  
1. Size the opening to fit the air cleaner cabinet as closely  
as possible.  
2. Frame the opening to provide adequate support for the  
cabinet. The cabinet must fit snugly in the opening;  
allow no more than 1/4 in. (6 mm) from the opening to  
each side of the cabinet.  
3. Cover the framing and any unused portion of the open-  
ing with wallboard, plywood, or other material and finish  
to match the ceiling.  
1. Remove the door/grille from the carton and set it aside.  
2. Remove all filters  
3. Fit the cabinet into the prepared ceiling opening or  
position on the ceiling.  
4. Use the four 3/8 x 16T internal nuts (one at each corner)  
to fasten the cabinet to a structural support (bar joist,  
concrete slab or timber framing). See Fig. 5.  
Electrical Hookup  
All wiring must comply with applicable codes and ordinances.  
The power source must agree with the model type: 120V,  
60 Hz; 208/230V, 50/60 Hz or 277V, 60 Hz. The air cleaners  
are internally prewired.  
NOTES:  
All external hardware is furnished by the installer.  
When using the suspension system of mounting,  
be sure to include a means for leveling adjust-  
ment after installation.  
68-0198EF-4 Revised 11-07  
4
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
Never rest the air cleaner on the T-bar.  
11. For Series 1 only. Be sure the fastener tabs are facing  
downward and fasten them.  
5. Level the air cleaner.  
12. For Series 2 only. Be sure both catches are turned  
down and filter rests firmly on catches.  
13. Install the prefilter in the air cleaner lid. Position the  
metal screen mesh so it is facing upward when the lid is  
closed.  
6. Turn the air cleaner power on and check for proper  
operation for 2 to 3 minutes. There should be a smooth,  
powerful blower sound and air discharging from both  
ends of the air cleaner.  
7. Turn off the power.  
8. Install the particle filter. Note airflow direction arrows if  
present. If arrows are not present, install the filter with  
the fasteners facing downward.  
Lid Assembly  
The F111 lid is held in place by two separable hinges and two  
spring loaded plungers. To install the spring loaded plungers  
on the lid follow these steps:  
HEX BOLT  
TOP OF METAL CABINET  
1. Pull the plunger back and twist a quarter turn to reveal  
the wrench flat on the body of the spring loaded plunger  
(see Fig 6.)  
THREADED  
ROD  
LOCK  
WASHER  
2. Turn the threaded barrel out of the spring plunger.  
3. Insert the threaded barrel through the hole in the lid and  
turn the spring loaded plunger onto it.  
JAM  
NUT  
4. Tighten the assembly with wrenches.  
5. Repeat steps 1 through 4 for the second plunger.  
CHAIN  
EYEBOLT  
JAM NUT  
3/8 IN. X 16T  
WRENCH FLAT  
O
R USI  
N
G OPTIONA  
L
"Z" BRACKETS  
THREADED  
BARREL  
TOP OF METAL CABINET  
WRENCH  
FLAT  
"Z" BRACKET (4)  
SPRING  
LOADED  
PLUNGER  
NOTE:  
FASTEN SECURELY TO STRUCTURAL  
SUPPORT SYSTEM, I.E. BAR JOIST,  
CONCRETE SLAB OR TIMBER FRAMING.  
BOTTOM FLANGE AGAINST  
UNDERSIDE OF TEES  
CEILING  
TEE  
BOTTOM VIEW OF  
UNIT WITHOUT  
LID ASSEMBLY  
M11994  
M10892  
Fig. 6. Lid assembly.  
Fig. 5. Fasten cabinet to a structural support.  
9. Fasten the filter tabs. Be sure there is a snapping sound  
when fastened. The tabs are commercial Velcro and  
require more force than lightly pushing them together.  
Opening/Closing the Lid  
To open the lid, pull the spring loaded plungers back to  
disengage the plunger. Carefully swing the lid open on the  
hinges while supporting the filter and/or adsorbent modules as  
required. To close, swing the lid into the closed position and  
engage the plungers.  
IMPORTANT  
Do not touch the pleated filter media. Handle only the  
filter frame to prevent damage to the filter media.  
10. Remove CPZ™ sorbent modules (select models) from  
their packaging and install one module into each cavity.  
Be sure the fastener tabs are facing downward and fas-  
ten them.  
Removing /Replacing the Lid  
IMPORTANT  
The lid is heavy. Make sure that it is supported  
before removing.  
5
68-0198EF-4 Rev. 11-07  
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
To remove the lid, swing it into the open position. Move the lid  
to the side to disengage the hinge pins. Reverse the  
procedure to replace the lid.  
at least 20% of a specified ventilation rate or code must be  
derived from outdoor air. The F111 (series 1,2) air cleaner  
filtered and recirculated air can be the remaining 80%.  
OPERATION  
SERVICE  
The F111 (series 1,2) in Ceiling Media Air Cleaner has been  
engineered to improve indoor air quality for commercial and  
industrial applications. The filters are the most practical and  
effective filtering system for removing atmospheric dust,  
pollens, bacteria, viruses, mold spores, smoke, fumes, mists  
and aerosols. Refer to Fig. 7.  
CAUTION  
Can cause personal injury or equipment damage.  
Turn off power before installing or servicing the air  
cleaner.  
Electrical Hazard.  
IMPORTANT  
CPZ™  
BLOWER  
MOTOR  
AIR VENTS  
CPZ™  
SORBENT  
FILTER  
Be sure to change filters as recommended to prevent  
reduced airflow in the air cleaner.Stand on a stable  
platform when working with the air cleaner.  
SORBENT  
FILTER  
MODULE  
MODULE  
INTAKE  
CEILING LINE  
CEILING LINE  
The useful life of the CPZ™ sorbent modules may vary from 4  
to 24 months, depending on the application. In most  
applications, the sorbent media life ranges from 12 to 18  
months. The particle filter life ranges from 6 to 24 months with  
12 to 24 months as an average. The modules and filters need  
to be changed more frequently in facilities that operate 24  
hours a day.  
PARTICLE FILTER  
CLEAN AIR  
DISCHARGE  
CLEAN AIR  
DISCHARGE  
PREFILTER  
AIR IN  
AIR IN  
M12651A  
Fig. 7. F111 (series 1,2) air cleaner operation.  
The air cleaner is either operating (power on) or off (power  
off). There are no other operational options available. Even  
when the area is unoccupied, the air cleaner can be operated  
continuously to prevent buildup of airborne contaminants.  
Operate the air cleaner only when the area is occupied when  
specific activities produce contaminants.  
Prefilter  
The disposable prefilter collects large dust particulates and  
lint- type airborne fibers. Check the filter every two weeks to  
determine the replacement frequency:  
1. Slowly open the lid, supporting the lid so the filters do  
not fall out.  
2. Remove the dirty prefilter.  
The CPZ™ sorbent module has the ability to collect and hold  
gas-phase compounds and vapors typically found in  
commercial and light industrial facilities. These gases and  
vapors frequently appear as odors that, at times, can be  
annoying and irritating. The modules become saturated after  
collecting 25% to 50% of their weight in gaseous odors. The  
quantity of CPZ™ material provides adequate dwell time to  
ensure up to 95% collection efficiency in the first pass. This  
also provides a long maintenance-free service life.  
3. Install the new prefilter in the air cleaner lid. Position the  
metal screen mesh so it is facing upward when the lid is  
closed.  
4. Close and latch the lid.  
Particle Filter  
The particle filter collects particulates that pass through the  
prefilter. The filter life is typically from 1 to 2 years. There is  
decreased air quality and a pulsing sound when the filter is  
loading the contaminants. The filter must be replaced when  
the pulsing sound is noticed.  
The minimum recommended air exchange rate is 2.5 times  
per hour. In a heavily contaminated area, up to 15 air  
exchanges per hour can be necessary. The factors that  
determine what the rate of air exchange should be are:  
generation rates of the various pollutants;  
concentration level of the pollutants;  
desired contamination reduction level.  
NOTE: The filter must be replaced. Washing, vacuuming or  
reverse air blasting does not clean it.  
Airborne contaminants will always be present in the air where  
contaminant generations take place. Air cleaning systems and  
ventilators do not eliminate airborne contaminants, they  
reduce the excessive accumulation of the contaminants. To  
eliminate the contamination, the source of contamination must  
be removed.  
1. Slowly open lid, supporting it so the filters do not fall out.  
2. Open the securing strips and with both hands and slide  
the filter toward you.  
3. Place spent filter in a plastic trash bag and dispose of  
properly.  
4. Inspect the motor brackets for loose fasteners and  
tighten as necessary.  
Local, Federal and professional ventilation engineering  
standards and codes prescribe minimum ventilation rates to  
dilute air contamination in specific applications. The  
5. Install the new filter. Note direction of airflow arrows, if  
present. If arrows are not present, install the filter with  
the fasteners facing downward.  
ventilation rates usually assume the injection of outdoor air  
measured as air exchange rate. The use of the F111 (series  
1,2) air cleaner to comply with ventilation requirements is an  
acceptable alternative to ventilation with outdoor air. However,  
6. Fasten the filter tabs. Be sure there is a snapping sound  
when they are fastened. The tabs are commercial  
Velcro and require more force to fasten.  
68-0198EF-4 Revised 11-07  
6
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
IMPORTANT  
Do not touch the pleated filter media. Handle only the  
filter frame to prevent damage to the filter media.  
3. For Series 2 only.Support the adsorbent module with  
one hand and turn open the catches  
4. Use two hands and slide the filter from the housing.  
7. Close and latch the lid.  
IMPORTANT  
The module weighs about 26 lb (12 kg) and can be  
hard to handle.  
CPZ™ Adsorbent Module  
The CPZ™ adsorbent module is used to collect gases,  
vapors, odors and volatile organic compounds (V.O.C.) from  
the air that passes through the air cleaner. Adsorbents collect  
and hold 25% to 50% of their weight in odorous gases and  
vapors. The impurities are collected until the adsorbents reach  
saturation. At saturation, the adsorbents emit a continuous  
strong pungent odor. If the air cleaner is turned off for 8 to 10  
hours, there will a temporary odor when it is turned back on. If  
the odor persists for 30 minutes, it is time to replace the filters.  
5. Place the spent module in a plastic trash bag and  
dispose of properly.  
6. Remove CPZ™ sorbent modules from their packaging  
and install. Be sure the fastener tabs (3) are facing  
downward and fastened.  
7. For Series 1 only. Be sure the fastener tabs are facing  
downward and fasten them.  
8. For Series 2 only.Be sure both catches are turned  
down and filter rests firmly on catches.  
9. Close and latch the lid.  
NOTE: When tobacco smoke is a contaminant, both the  
particle filter and the adsorbent filter will need to be  
serviced at the same time.  
NOTE: On initial startup, a small amount of dust can blow  
from the air cleaner. This is normal and stops a few  
minutes after startup. The start-up filters will catch all  
the dust. The startup-filters are placed in the two  
exits outlets on the grill. After running the unit for 5  
minutes, turn off the unit. Remove and discard the  
two start-up filters.  
1. Slowly open the lid, supporting the lid so the filters do  
not fall out.  
2. For Series 1 only.Support the adsorbent module with  
one hand and release the fastener.  
7
68-0198EF-4 Rev. 11-07  
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
PARTS LIST  
Refer to Fig. 8 and Table 4 for replacement part information.  
Table 4. Replacement Parts.  
Fig.  
Reference No.  
Description  
Pack Qty  
Order Number  
Reference No.  
1
CPZ™ sorbent module (requires 2)—used with only  
95% HEPA or 95% ASHRAE particle filters  
1
32004078-001  
31005  
Charcoal sorbent module (requires 2)—used with only  
95% HEPA or 95% ASHRAE particle filters  
1
1
1
32004078-002  
32004078-003  
32004078-004  
Zeolite sorbent module (requires 2)—used with only  
95% HEPA or 95% ASHRAE particle filters  
Permanganate sorbent module (requires 2)—used with  
only 95% HEPA or 95% ASHRAE particle filters  
2
3
Blower wheel, Series 1  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
810103  
Blower wheel, Series 2  
32002285  
32000265  
32000549  
32000550  
32000270  
32000263  
320002415-001  
Motor capacitor; 120V, 60 Hz  
Motor capacitor; 208/230V, 50/60 Hz  
Motor capacitor; 277V, 60 Hz  
Motor; 120 V, 60 Hz, Series 1  
Motor; 208/230V, 50/60 Hz, Series 1  
Motor; 120 V, 60 Hz, Series 2  
Motor; 208/230V, 50/60 Hz, Series 1  
Motor; 277V, 60 Hz  
810183  
810157  
810160  
810208  
810158  
4
5
320002415-002 810158  
32000264  
810159  
21002  
21001  
99.97% HEPA media filter, 3”  
95% hospital grade filter  
32000204-001  
32000203  
95% ASHRAE particle Filter  
Prefilter (disposable)  
50004739-001  
32002307  
6
7
810134  
Lid assembly with hinges and latches in White color  
32002308-002  
OPTIONAL Parts not shown in Fig. 8.  
Speed switch, variable  
1
1
1
3
1
4
1
2
1
1
32000234  
32000235  
32000260  
32000261  
32000262  
32002353  
32002287  
32002278  
32002308-001  
32002308-003  
41105  
41107  
810143  
810144  
810151  
Grounded 8 ft power cord  
Motor mount bracket  
Motor maintenance grommet set  
Snap-loc Tabs  
Z Sidemount Bracket Kit  
Series 1 to Series 2 Upgrade Kit  
Spring Loaded Plunger  
Lid assembly with hinges (no latches)  
Lid assembly with hinges and latches in Black color  
68-0198EF-4 Revised 11-07  
8
 
F111 (SERIES 1,2) IN CEILING MEDIA AIR CLEANER  
CABINET  
ASSEMBLY  
SORBENT MEDIA MODULE  
(2 REQUIRED)  
1
BLOWER WHEEL  
MOTOR CAPACITOR  
MOTOR  
2
3
4
5
MEDIA FILTER  
PREFILTER  
6
LID ASSEMBLY WITH  
HINGES AND LATCHES  
7
M11995E  
Fig. 8. Exploded view of F111 (series 1,2) in Ceiling Media Air Cleaner components.  
9
68-0198EF-4 Rev. 11-07  
 
LIMITED TWO-YEAR WARRANTY  
Air-Pure Systems warrants its air cleaner products to be free from defects in workmanship or materials under normal use and service, for a period  
of two (2) years from the date of purchase by the original end-user. If at anytime during the warranty period the product is defective or malfunc-  
tions, Air-Pure Systems, through the distributor or dealer, from which the product was purchased, or through an authorized warranty repair  
station, shall at Air-Pure Systems option, replace or repair the defective product or component.  
This warranty does not cover removal or installation costs. This warranty shall not apply if it is shown that the defect or malfunction was caused  
by damage which occurred during handling or shipment, improper electrical connections, improper use of the product or abuse.  
Air-Pure Systems sole responsibility shall be to repair or replace the product within the terms stated above. AIR-PURE SYSTEMS SHALL NOT  
BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING,  
DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PROD-  
UCT. (Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.) THE  
WARRANTIES SET FORTH HEREIN ARE EXCLUSIVE AND AIR-PURE SYTEMS EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES,  
WHETHER WRITTEN OR ORAL, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OF MERCHANTABIL-  
ITY, WORKMANSHIP, OR FITNESS FOR A PARTICULAR USE.  
This warranty gives you specific legal rights and you may have other rights which vary from state to state.  
How to make a warranty claim or have questions answered:  
Should you have a warranty claim or questions about the warranty policy, contact the distributor or dealer from which you purchased the product  
or the authorized warranty repair stations nearest your location.  
NOTE: Do not return any products or parts to the factory without a factory issued “Returned Warranty Goods Label” issued by Air-Pure Sys-  
tems.  
In the event you or other persons, have any questions concerning the use and care of this product or this warranty please call or write the factory.  
Air-Pure Systems  
16873 Fish Point Rd. SE  
Prior Lake, MN 55372-1714  
Phone: (800) 998-1919  
Fax: (800) 221-3248  
Air-Pure Systems, Inc.  
16873 Fish Point Rd. SE  
Prior Lake, MN 55372-1714  
Phone (800) 998-1919  
Fax: (800) 221-3248  
68-0198EF-4 Revised 11-07  
 

Grace Radio GDI IRD4400M User Manual
Grizzly Biscuit Joiner H8361 User Manual
Grundig Satellite Radio FR 300 User Manual
Hamilton Beach Gas Grill 31602 User Manual
Hamilton Beach Slow Cooker 33461 User Manual
Honeywell Plumbing Product GSS Series User Manual
Huffy Fitness Equipment 211387 User Manual
Hunter Fan Outdoor Ceiling Fan M3535 01 User Manual
ICP DAS USA Network Card LinCon 8000 User Manual
iHome Computer Keyboard IH K225LB User Manual