ICTC Holdings Corporation Oven Countertop User Manual

Countertop to Floor Stand Assembly Instructions  
Countertop not  
Insert can tray with arrows down  
included in Kit  
before attaching countertop  
B
B
Drill holes in back  
of counter top  
A
A
Tools required:  
·
·
·
3/8 electric drill  
Phillips screw driver  
Flat blade screwdriver  
TOLL FREE 1-800-494-4376  
Countertop to Floorstand Conversion Kits:  
12 Position stand - Part #BL-3770 -  
16 Position stand - Part #BL-3771 -  
1. Remove rubber feet and base plate from counter top  
2. Place counter top onthe base assembly  
3. Insert shelf into the side support channels, making sure that arrows on the glides are facing  
down. (ref B)  
4. Engage shelf into the slots.  
5. Install screws at the top of the support channel. (ref A)  
6. Drill new holes in the back of the counter top, using the existing holes in the floor stand using the  
drill bit supplied.  
7. Install the screws into the back of the floor stand.  
8. Make sure the lower legs are firmly attached to the floor stand.  
 

Grizzly Grinder H3172 User Manual
Haier Flat Panel Television HL26BG User Manual
Hamilton Beach Coffeemaker 46924 User Manual
Hamilton Beach Electric Steamer 37537 User Manual
Hasbro Games GIJoe DinoHunter User Manual
Hasselblad Camera Lens HC 4 210 User Manual
Honeywell Thermostat H8908B Humidistat User Manual
HP Hewlett Packard Computer Hardware HP UX 11i User Manual
Hypertec Carrying Case N16348NHY User Manual
IBM Personal Computer LCD PC User Manual